Pristatymo terminas kiekvienai prekei nurodomas prie kainos bloko.
Pristatymas visoje Lietuvoje: nemokamas.
Trumpai apie prekę
Prekė: Vejos robotas NAC RLM800-DY, ultragarsinis, iki 800 m². Kategorija: Robotinės vejapjovės.
- Gamintojas: NAC
- Modelis: Robot koszący
Robot mower for grassRLM800-DY
The NAC RLM800-DY grass mowing robot with ultrasonic obstacle detection sensor and the ability to control via the application.
This device is extremely easy to install and use, designed for lawns up to 800 m2.
The robot has 2 programs to choose from:
- Manual modecan set the daily working time of the mower. The recommended working time during the day for a working area of 800 m² is 8 hours a day. After pressing the START button, the robot will start mowing.
- Automatic mode controlled using the application from a smartphone. Thanks to the Bluetooth module, the automatic mower can be connected directly to the mobile phone via the application. Using the application, you can set individual robot work settings, m.in. working days, working hours and mowing areas.
Mowing can take place both during the day and at night.
This extremely easy to install and use device is designed for lawns up to 800 m2.
The set is ready to work. All you need to do is do the following:
- install the charging station on as flat, dry terrain as possible, without electromagnetic interference.
- attach the signal cable to the ground, using the mounting pins included in the kit, creating a working area for the robot.
Convenience and safety are provided by the set of sensors that the robot has been equipped with:
- ultrasonic obstacle encounter sensor
- rain sensor
- crash sensor
- tilt sensor
- lift sensor
Technical parameters:
- cutting width: 18 cm
- cutting height: from 20 to 60 mm
- adjustment of cutting height by means of a knob
- the ability to control via the application
It is equipped with a patented 3in1 cutting system (cutting, mulching, grinding). The cut off grass tips are small enough that their raking is unnecessary, and the residue of mowing fertilizes the lawn.
Adjustment of cutting height is possible using the knob located on the upper housing. Height adjustment range: 20-60 mm.
The mowing robot is equipped with ultrasonic sensors that allow the detection of permanent obstacles higher than 10 cm, such as walls, fences and garden furniture. When an obstacle is detected, the mowing robot will stop, withdraw, and then continue mowing in a different direction without colliding with the obstacle.
Convenience and safety are provided by the set of sensors that the robot is equipped with:
- The mowing robot is equipped with ultrasonic sensors. They allow you to detect permanent obstacles higher than 10 cm, such as walls, fences and garden furniture. When an obstacle is detected, the mowing robot will stop, withdraw, and then continue mowing in a different direction. The robot will not collide with these obstacles.
- When the ultrasonic sensor is switched off, sensors that respond to overloads in the drive wheels react to collisions with fixed obstacles such as trees, walls, fences, garden furniture, etc. If a robot encounters an obstacle that has not been marked with a line to mark the work area, it changes direction of travel to avoid an obstacle
- The robot is equipped with a rain sensor to prevent the robot from working in adverse weather conditions. When the rain sensor comes into contact with water drops, the robot will return to the docking station.
- Slope sensor – if during mowing the slope of the area on which the robot works exceeds 20°, the robot will stop.
The set contains a set of necessary elements to start and operate the robot.
- The circuit cable can be connected and extended up to 400 running meters. We connect the cable like any electrical wire, remove the insulation from both connected wires, twist the isolated ends together. The connection should be secured with insulating tape.
TECHNICAL PARAMETERS:
- Battery voltage: 20 V
- Battery capacity: 2,5 Ah
- Battery Type: Lithium-Ion
- cutting width: 18 cm
- cutting height: from 20 to 60 mm
- adjustment of cutting height by means of a knob
- maximum mowing area: 800 m 2
- Rotation speed: 3100/min
- Number of cutting knives: 3
- maximum slope of the terrain degrees 20°
- ultrasonic obstacle encounter sensors
- measured sound power level LWA: 57 dB
- robot weight + battery: 7,9kg + 0,3kg
Charger:
- Power supply voltage and frequency: 100-240 VAC, 50/60 Hz
- Rated power: 30 W
- Charging voltage: 18 V DC
- maximum charging current: 1,8 A
- class of electrical protection: II
Specifications
| Group | Name | Value |
|---|---|---|
| Parametry | Condition | new |
| Parametry | Invoice | With VAT invoice |
| Parametry | Brand | NAC |
| Parametry | Series | RLM800-DY |
| Parametry | Mowing width | 18 cm |
| Parametry | Mowing height adjustment range | 2–6 cm |
| Parametry | Mowing performance | 800 m² |
| Parametry | Manufacturer code | RLM800-DY |
| Parametry | Product weight with unit packaging | 8.2 kg |
| Parametry | Batteries included | yes |
| Parametry | Model | Robot koszący |
| Parametry | Additional information | rain sensor,shock sensor,remote bluetooth controller,PIN code |








