Vejos robotas NAC, automatinis, iki 1800 m², su kaiščiais ir laidu

Trumpai apie prekę

Prekė: Vejos robotas NAC, automatinis, iki 1800 m², su kaiščiais ir laidu. Kategorija: Vejos robotai.

• Gamintojas: NAC
• Modelis: NAC RLM1800G2-T

Robot mower NAC Automatic mower RLM1800G2

The mowing robot of the renowned NAC RLM1800G2-T brand on the Polish market. The mower is designed for lawns with an area of up to 1800 m2.

THE PRODUCT COMES FROM THE OFFICIAL POLISH DISTRIBUTION❗

NAC RLM1800G2-T + complete installation kit

TECHNICAL DATA NAC RLM1800G2-T

ENGINE

• Engine type: electric, brush
• Power Supply: 24V
• Battery capacity: 4,4 Ah
• Battery type: Lithium-ion
• Number of batteries: 1

WORK SYSTEM

• Average charging time: 60 - 90 min
• Maximum working area: 1800 m2
• Mowing width: 21 cm
• Minimum cutting height: 25 mm
• Maximum cutting height: 55 mm
• Mowing modes: random, spiral
• Type of cutting blade: three separate cutters
• Number of mowing zones: 6

EQUIPMENT

• Docking station included: yes
• Method of returning to the docking station: via cable
• Signal cable included: yes, 100 mb
• Cable fixing pins included: yes, 100 pcs.
• Rain sensor: yes
• Tilt sensor: yes
• Obstacle detection sensor: yes
• Lifting sensor: yes
• Mobile application: yes
• LCD display: yes
• GSM module: no
• Edge trimming function: no
• PIN code protection: yes
• Safety switch: yes

TOTAL DIMENSIONS

• Weight: 9,9 kg

ROBOT CHARGER

• Power supply voltage and frequency: 110-240 V AC, 50 Hz
• Charging voltage: 24-29,4 V DC
• Rated power: 85 W
• Maximum charging current: 4 A

AUTOMATIC ELECTRIC MOWER - ROBOTIC MOWER NAC RLM1800G2-T

The kit includes everything needed to install the mower.

Modern mowing algorithm - grass is always cut from the other side. The result is a very nice lawn.

Easy to use.

Mowing can be done both during the day and at night.

After installing the charging station and perimeter cable, simply set the mowing scheme for one day of the week (Monday to Sunday, once for each day) on the control panel.

The NAC RLM1800G2-T lawn mowing robot has the ability to program using a smartphone thanks to the application. The robot can also be programmed with buttons, which are located on the control panel.

The RLM1800G2-T robotic mower is equipped with:

• Company carton NAC,
• 3 separate cutting knives,
• Docking station,
• Battery charger,
• 4 screws for fixing the docking station,
• Strip (ruler) for distance measurement,
• 100 mb of limit cable,
• 100 pins fixing the signal cable in the ground
• A set of assembly tools.

GUARANTEE OF QUALITY AND ACCESS TO AUTHORIZED MANUFACTURER’S SERVICE

• Warranty card NAC,
• EC declaration of conformity,
• Instructions for use in Polish.

• Lifting sensor - are placed between the upper and middle cover. If the mower is lifted off the ground, it will stop working within 1 second.
• Tilt sensor - when the mower is tilted more than 30 degrees in any direction within 2 seconds it will stop working.
• Collision sensor - both the front and two side parts of the mower have collision sensors that activate when the mower hits a hard standing object.
• Rain sensor - rain sensors are located on the control panel at the top of the mower cover. The mower will automatically return to the charging station when it rains
• Two mowing modes - go straight and drive around the circle (high efficiency).
• Touch sensor - If a child or other person sits on the robot, presses it firmly or attempts to ride a lawn mower, the mower will turn off automatically within 1 second.
• Electronic gyroscope - the mower has an electronic gyroscope to move straight on inclines.

By buying from us you can be sure that you will receive original equipment from the official distribution of polish brand NAC with complete equipment.

Guardian of your perfectly maintained lawn

There is nothing more pleasant than watching the work do itself. Especially when it is done accurately and reliably. Draw lawn mowing from your to-do list. From now on, the robot takes over your duties. Schedule time with your family, go on vacation or do something you just didn’t have time for before. For the most demanding people who value their time and convenience, we present an excellent machine that will introduce the user to a new level of lawn care experience - the robot mowing NAC RLM1800G2-T. It is the result of the latest technological solutions, as well as the search for answers to the question of how to make work in large garden spaces not absorb your time, and at the same time bring a brilliant effect, pleasing the eyes every day. The advantages of an autonomous mower, in addition to not having to remember to mow, can also include the lack of composting or transporting the swath. The mowing robot mulches the grass, i.e. cuts off its small fragments, which go back to the turf and create an additional dose of fertilizer. Frequent mowing also affects the fact that weeds do not have time to develop. In addition, the mowing robot is quiet - it will not interfere with rest neither people staying in the garden nor neighbors. Bet on the right gardener in your garden from NAC.

Set the boundaries of your garden and enjoy a beautifully mowed lawn

The NAC RLM1800G2-T robot is designed for fully maintenance-free mowing of your lawn. The boundary line placed in the grass delineates the mowing area, and also rewards any permanent obstacles located on the lawn. The cable creates a closed circuit – its beginning and end are placed in the charging station, which simultaneously powers the cable with a very low voltage and intensity – completely harmless to humans and animals, but detectable by robot sensors. The unique mowing system will make your lawn more beautiful than ever – mowing can take place both day and night. Random and spiral cutting system for even greater mowing efficiency - the robot automatically selects the mowing path depending on the height of the grass and the load. The mowed grass is cut with almost surgical precision and then strongly shredded into small particles that are a natural fertilizer for the lawn. The robot knows when it is falling from strength. At this point, it automatically heads towards the charging station to charge the batteries. It does not require any user intervention, because it moves intuitively, according to the area of work programmed for it.

Random lawn cutting system

Based on its principle of operation “randomly”, the robot automatically mows the entire demarcated area of the lawn. The robot reaches and bounces at different angles from the wire that marks the boundary of the lawn. In this way, after a sufficiently long working time, the entire lawn will be mowed, and you can admire the effects of the work that was done for you.

Spiral Lawn Cutting System

The robot is able to recognize the presence of higher and/or more dense grass in the garden area and run automatically, if it deems it necessary, spiral movement in order to better finish the lawn shearing.

Find out how easy it is

The installation of the NAC mowing robot is a very easy process. It is enough to properly place the docking station, then surround the mowed area with a boundary wire, attaching it to the lawn with special pins. The last step is just to set a mowing schedule and you’re done. All these steps are described in detail in the user manual and below in four easy steps. No special skills are required. If the annual verticulation of the lawn is performed in the garden, the installation can be recessed in the ground up to 5 cm - this protects the installation from accidental damage. Below is a way to install the robot in your garden - see how easy it is.

Installation of the robot in the garden

Before laying the perimeter cable, it is necessary to inspect the entire lawn surface. Estimate any changes that need to be made to the grass surface or precautions that need to be taken when laying the circuit cable for better robot functioning:

1. Preparation and demarcation of work zones. More information on the designation of zones is presented in the section below.

2. Installation of a circuit cable.

3. Installation of charging station and power supply.

4. Setting the robot work schedule.

Divide your lawn into zones

There are no two identical gardens. The garden can have either only one main lawn or consist of several smaller areas. For the NAC robotic mower, this is no problem! With the ability to divide the area into 6 mowing zones NAC RLM1800G2-T can handle any type of lawn with great ease. The need to introduce zones on your lawn can be dictated by its shape or the obstacles that are on it.

Designation of secondary zones

During the installation of the device, any secondary zones should be specified. Secondary zone is understood as a part of the lawn connected to the main lawn by means of a narrowing of the road, which is difficult to reach on the basis of accidental movement made by the robot. Access to the zone should be available without stairs and differences in levels exceeding the permissible sizes. Whether a zone is defined as a “secondary zone” also depends on the size of the primary zone. The larger the primary zone, the more difficult it is to reach narrow passages. In other words, the transition from 50 to 200 cm should be considered a secondary zone.

Highest requirements

The presented autonomous mower has been equipped with two modern electric motors - one for each drive wheel. The technology used in the production of engines reduces to a minimum the need to service the equipment and significantly extends its service life. In addition, thanks to it, the robot works quieter and its motors use less energy to work. The device works about 50 minutes on a single charge, and after returning to the base, the full charge time is up to 90 minutes.

Powerful Lithium - Ion Battery

The environmentally friendly NAC RLM1800G2-T mowing robot is powered by a new generation battery with a capacity of up to 4,4 Ah. The obvious reason why NAC uses lithium-ion batteries is its much longer life compared to standard Ni-Cd and Ni-Mh counterparts. The lithium-ion battery is smaller and lighter, and its discharge time is very long. In addition, these batteries are also able to optimally distribute energy towards traction and mowing functions. What’s more, thanks to the use of lithium-ion cells, they are characterized by exceptional service life and do not spontaneously discharge – there is no capacity loss effect. When, after a long effort, your robot finally falls from strength, it will head towards the charging station itself. You don't have to do anything. NAC RLM1800G2-T will charge the batteries and get back to work. The modern technology used ensures the best battery parameters and long-term service life. Bet on a device powered by batteries and be ECO!

Perfect mowing

Three separate cutting knives with a total cutting diameter of up to 21 cm are made of high quality stainless steel. They are characterized by excellent durability and extreme cutting precision. Every day they mow a few millimeters of grass height so that it grows evenly and pleases your eyes every day. The presented robot NAC RLM1800G2-T, thanks to its powerful motors and intelligent blades, is ideal for working on a lawn with an area of up to 1800 m2.

Mowing with automatic mulching function for ecological lawn care

The question that everyone who hears about the mowing robot for the first time asks is: “What does the robot do with the mowed grass? Is he collecting it somewhere? ”. No, it does not collect, but mulches. The process of mulching grass consists in mowing grass very often so as to cut as short blades of grass as possible, with a length of at most a few millimeters. In addition, the cutting blades themselves are shaped so that the mowed blades are chopped into the smallest fragments. Cuts after mowing, before they decompose, form a very thin layer that limits the evaporation of water from the soil. In addition, mulching contributes to maintaining biological balance and feeds grass with nutrients. With the mowing robot, your lawn will always be fresh and green.

A set of smart sensors

NAC RLM1800G2-T knows that mowing wet grass is not effective. Thanks to the installed sensors, senses rain in time and hides in front of it in the charging station. Wet grass is heavier, moreover, it is more susceptible to diseases. To increase efficiency during rain, the robot returns to the base station where it charges and returns to the mowing schedule after the precipitation has subsided. The manufacturer took care of high degree of safety using a lifting sensor, crash sensor and tilt sensor in the model - the robot will automatically turn off the cutting blade after lifting it, e.g. by children or hovering over an obstacle not determined by the border line. The crash sensor mounted in the robot will make it detect and bypass obstacles encountered in its path.

A clever way to manage a robot

Bluetooth communication in combination with the dedicated NAC application allows remote control of the robot and its programming using a smartphone or tablet. Thanks to this function, the user has full control over the device without having to approach the robot. The mowing robot is your helper. Durable, proven and reliable, he will follow every command and above all... he will be faithful to you. There is no chance even of an innocent jump to the side, because you have the PIN code protecting it and you will not hesitate to use it. The PIN code protects the robot against theft and unauthorized use or changing settings. To start the robot and access the programming options, it is necessary to provide 4-digit code.

Durable body and perfect stability

The robot has an impact and fade resistant housing that will always look like new, and the solid axle and wide tires guarantee excellent machine stability.

Adjust the appropriate length of the perimeter cable and the number of pins

The length of the perimeter wire provided in the kit and the number of fixing pins may be insufficient for complex lawn shapes. In the selection of the number of pins should be guided by the principle of one pin per one running meter of the cable - in the case of arches, they should be placed more densely. Additional limit cable and pins fixing it to the ground can be found in our offer

• Engine type: electric, brush
• Power Supply: 24V
• Battery capacity: 4,4 Ah
• Battery type: Lithium-ion
• Number of batteries: 1
• Average charging time: 60 - 90 min
• Maximum working area: 1800 m2
• Mowing width: 21 cm
• Minimum cutting height: 25 mm
• Maximum cutting height: 55 mm
• Mowing modes: random, spiral
• Type of cutting blade: three separate cutters
• Number of mowing zones: 6
• Docking station included: yes
• Method of returning to the docking station: via cable
• Signal cable included: yes, 100 mb
• Cable fixing pins included: yes, 100 pcs.
• Rain sensor: yes
• Tilt sensor: yes
• Obstacle detection sensor: yes
• Lifting sensor: yes
• BLUETOOTH module: yes
• Mobile application: yes
• LCD display: yes
• GSM module: no
• Edge trimming function: no
• PIN code protection: yes
• Safety switch: yes
• Weight: 9,9 kg

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With VAT invoice
Parametry	Brand	NAC
Parametry	Series	RLM
Parametry	Mowing width	21 cm
Parametry	Mowing height adjustment range	2.5–5.5 cm
Parametry	Mowing performance	1800 m²
Parametry	Average working time	50 min
Parametry	Manufacturer code	NAC RLM1800G2-T
Parametry	Product weight with unit packaging	9.9 kg
Parametry	Batteries included	yes
Parametry	Additional information	rain sensor,shock sensor,controlled via smartphone,PIN code