Variklinė alyva 2-taktėms pjūklų ir žoliapjovių varikliams, 1 l, 2 vnt.

Trumpai apie prekę

Prekė: Variklinė alyva 2-taktėms pjūklų ir žoliapjovių varikliams, 1 l, 2 vnt.. Kategorija: Alyvos.

• Gamintojas: Axenol
• Modelis: 2L OLEJ DO MIESZANKI AXENOL

• colors. In general, semi-synthetic oils for two-stroke engines, which are used in combustion saws, can be red or green. In terms of properties, both versions of do not differ drastically, but for practical reasons if there was always red oil in the saw, you should stick to it and vice versa – in engines operating on green oil it is not worth changing it.

Motor oil based on mineral oils. Very good lubricating properties and high combustion efficiency. Performance class: JASO-FB, ISO-L-EGB. The proportion of the mixture 1:50.

Very good lubricating properties, efficient combustion.

Mixture oil , for two-stroke engines, developed on the basis of mineral oils.

It has excellent lubricating properties in every engine speed range.

The recommended ratio of use with ethylline is 1:50 (100ML of oil per 5L of gasoline).

How to know the bad oil?

• If after dispensing oil and fuel, the engine does not work evenly or the exhaust gases become denser, most often this means that the proportions of the mixture are not appropriate, less often that inadequate oil was used. In the first case, the correct proportions should be completed as far as possible, and if this is not possible, then, as in the second case, the combustion saw should not be used.
• If after lubricating the chain with the right amount of oil, this is splashed, it means that it is probably not of the right quality (the oil is too little sticky and does not lubricate moving parts).
• If after some time of operation the chain oil begins to burn (smoke is blue), it means that the preparation used does not show sufficient resistance to high temperature.
• For lubrication of chains of combustion saws not used for a long time, a special oil with increased protective properties and often with anti-corrosion additives should be used.

Specifications