Vandens geležies šalinimo filtras 13x54" Katalox Light 70L su Clack TC

Trumpai apie prekę

Prekė: Vandens geležies šalinimo filtras 13x54" Katalox Light 70L su Clack TC. Kategorija: Filtrai ir vandens minkštikliai.

• Gamintojas: no brand
• Modelis: Katalox 70L TC
• Talpa: 70 l

⭐ WATER DE-IRONER KATALOX LIGHT 70L CLACK TC

✅ The Katalox Light 70L Clack TC water iron remover is an automatic system designed to effectively remove iron and manganese from well water. The device helps to reduce rusty water color, metallic aftertaste and deposits appearing on fittings, ceramics and elements of water installation.

✅ The system is equipped with 70 liters of Katalox Light deposit and an automatic Clack TC control head. The controller independently performs rinsing of the bed at programmed intervals, so that the device does not require daily operation.

⭐ The most important advantages of the iron remover

✅ 70 liters of Katalox Light deposit – a modern catalytic medium designed to reduce iron and manganese.

✅ Automatic Clack TC head – controls the rinsing cycles of the bed according to the set time intervals.

✅ Removal of iron and manganese – helps to improve the clarity, appearance and performance of well water.

✅ Reduction of hydrogen sulfide H₂S – the deposit may also limit the presence of hydrogen sulfide responsible for the characteristic unpleasant odor.

✅ Without chemical regeneration – the deposit does not require the use of salt or potassium permanganate.

✅ Catalytic oxidation support – Katalox Light accelerates the process of iron and manganese oxidation before they are retained in the deposit.

✅ Wide pH range 5,8 – 10,5 – allows the system to be used with different water parameters.

✅ Maximum flow rate of about 2,5 m³/h – allows you to operate more extensive water installations.

✅ Recommended flow rate of about 1,8 m³/h – ensures adequate time of contact of water with the bed.

✅ Botla 13x54″ – holds 70 liters of filter material and creates an efficient de-ironing column.

✅ Support up to 9 to 10 people – with appropriate water parameters and a properly executed installation.

✅ Bypass valve included – facilitates installation, operation and subsequent service work.

✅ Straight or angular connections – the type of connection can be selected for installation.

✅ Device backfilled and configured – the iron remover is supplied in a form prepared for assembly.

⭐ Effective reduction of iron and manganese

✔ Increased content of iron in well water may cause rusty or brown color, metallic aftertaste and formation of deposits.

✔ Iron deposits may appear on faucets, sinks, bathtubs, shower cabins, sanitary facilities and inside the water system.

✔ Increased content of manganese can lead to the formation of dark deposits and deterioration of water performance.

✔ The Katalox Light deposit supports the process of oxidation of impurities and then retains the resulting particles during the flow of water through the filter column.

✔ Regular automatic rinsing removes retained impurities from the deposit and prepares them for the next filtration cycle.

✔ Reducing iron and manganese content helps protect water installation, fittings and household appliances from deposits.

⭐ Advanced Katalox Light

✔ The device is equipped with 70 liters of Katalox Light deposit.

✔ Katalox Light is a modern catalytic medium containing about 10% manganese dioxide and natural minerals.

✔ The deposit supports the oxidation process of iron and manganese, so that impurities can be effectively retained in the filter column.

✔ Large active surface and porous structure support effective contact of water with filter material.

✔ Katalox Light may also limit the content of hydrogen sulfide H₂S and selected heavy metals.

✔ The deposit does not require regeneration using salt or potassium permanganate.

✔ The lightweight and porous structure of the material helps to reduce the amount of water needed during proper rinsing.

✔ The deposit may also increase the pH of the water, limiting the conditions conducive to corrosion of the installation.

✔ The scope of work of the deposit is about pH 5,8 – 10,5.

✔ Actual performance depends on the chemical composition of the water, concentration of impurities, flow and proper aeration.

⭐ Clack TC Automatic Control Head

✔ The iron remover is equipped with an automatic Clack TC Time Clock head.

✔ The controller manages the rinse cycle of the bed at programmed intervals.

✔ Rinsing can be set to specific days and times, so that the system can perform them when the water intake is lowest.

✔ Automatic operation reduces the need for manual operation of the device.

✔ The head has intuitive programming, allowing you to set the basic parameters of the system operation.

✔ Clack TC design allows the use of connections 1″ straight or angular.

✔ The set includes a bypass valve, allowing you to disconnect the device from the installation during service work.

✔ The controller has a sustained settings in the event of a voltage failure.

⭐ Required water aeration

✔ For the proper operation of the Katalox Light deposit, it is necessary to aerate the water before the iron remover.

✔ Providing the right amount of oxygen enables effective oxidation of dissolved iron and manganese.

✔ The particles formed in the process of oxidation are then retained by the Katalox Light deposit.

✔ Insufficient aeration can reduce the efficiency of the entire system.

✔ The installation should be equipped with a pump with appropriate capacity, allowing to obtain the flow needed for proper rinsing of the bed.

✔ The offer includes a recommended brass aspirator designed for aeration of water in front of the device.

⭐ Use of iron remover

✔ Single-family houses – helps to reduce rusty tarnish, discoloration and deposits formed in the installation and on the fittings.

✔ Water from deep wells – the system is designed primarily for the treatment of water containing increased amounts of iron and manganese.

✔ Agricultural and agritourism farms – can improve the quality of water used in residential and commercial buildings.

✔ Service and craft facilities – helps reduce iron deposits in installations and water-using equipment.

✔ Correctly selected system supports the protection of the water system and improves the comfort of daily use of water.

⭐ Complete set ready for assembly

✔ The iron remover is supplied as a flooded and configured set, prepared for installation.

✔ The set includes a pressure cylinder 13x54″.

✔ The column contains 70 litres of Katalox Light deposit.

✔ The system is equipped with an automatic Clack TC head.

✔ The set includes a bypass valve.

✔ There are right or angular connections 1″ available to choose from.

✔ The kit also includes instructions for assembly and operation of in Polish.

⭐ Technical specification

✔ Type: automatic de-ironizer and water de-manganizer.

✔ Deposit: Katalox Light.

✔ Bed volume: 70 L.

✔ Manganese dioxide content in the deposit: about 10%.

✔ Tank: 13x54″.

✔ Head: Clack TC Time Clock.

✔ Water connection: 1″.

✔ Maximum flow rate: about 2,5 m³/h, or about 42 L/min.

✔ Recommended flow rate: about 1,8 m³/h, or about 30 L/min.

✔ Approximate number of users: approximately 9 to 10 people.

✔ Operating pH range: approximately 5,8 to 10,5.

✔ Chemical regeneration: not required.

✔ Salt: not required.

✔ Potassium permanganate: not required.

✔ Aeration of water: required before the device.

✔ Flush control: automatic, temporary.

✔ Set includes: 13x54″ cylinder, 70 L Katalox Light, Clack TC head, bypass, straight or angular connections and instructions.

✔ Before purchase (IMPORTANT)

• The device is sent flooded, programmed and prepared for assembly.
• In order to properly position the device, please send water analysis results.
• We always recommend prior consultation to match the system to the actual water and installation parameters.
• For the proper operation of the Katalox Light deposit, pre-aeration of water is required.
• The installation must ensure adequate flow during rinsing, so it is necessary to use a pump with adequate efficiency.
• The performance parameters given are indicative. Actual values depend on the chemical composition of the water, iron and manganese concentration, aeration and installation conditions.

⭐ FAQ – Frequently Asked Questions

❓ What is the Katalox Light 70L Clack TC iron remover used for?

✅ The device is designed to reduce iron and manganese from well water, helping to reduce rusty color, metallic aftertaste and sediment formation.

❓ What deposit is in the device?

✅ The system contains 70 liters of Katalox Light deposit, which is a catalytic filter medium designed, among others, to remove iron and manganese.

❓ Does Katalox Light require salt?

✅ No. The deposit does not require regeneration with salt or potassium permanganate. It is cleaned by properly carried out rinsing.

❓ Does aeration be needed before the iron remover?

✅ Yes. Aeration of water in front of the device is necessary, because the right amount of oxygen allows effective oxidation of iron and manganese.

❓ Does the device also remove hydrogen sulfide?

✅ Katalox Light may limit the content of hydrogen sulfide H₂S, which may be responsible for the characteristic unpleasant smell of water.

❓ How does the Clack TC head work?

✅ The head works in a time system and automatically starts flushing the deposit at programmed intervals.

❓ How often should I rinse the bed?

✅ The frequency of rinsing depends on the water parameters, the amount of contaminants retained and the intensity of use. The appropriate schedule is set during the configuration of the device.

❓ What is the iron remover performance?

✅ The maximum flow rate is about 2,5 m³/h, while the recommended workflow is about 1,8 m³/h.

❓ For how many people is the device intended?

✅ With the right water and installation parameters, the system can handle a farm of about 9 to 10 people.

❓ Do I need a water test before buying?

✅ Yes. Water analysis is very important because it allows you to assess the concentration of iron, manganese, pH and other parameters affecting the selection and configuration of the system.

Specifications