Vakuuminis slėgio siurblys stabdžių sistemai Yato YT-0674

Trumpai apie prekę

Prekė: Vakuuminis slėgio siurblys stabdžių sistemai Yato YT-0674. Kategorija: Įrankių rinkiniai.

• Gamintojas: Yato
• Modelis: YT-0674

✔️ This vacuum and pressure pump is a versatile tool for diagnosing systems in cars and other technical equipment that rely on pressure or vacuum for operation.

✔️ It comes with accessories that allow it to be used in almost any engine or system.

✔️ The YT-0674 pump features a switch that allows you to generate either vacuum or pressure, depending on its position.

✔️ Moving the switch towards the pump outlet will create a vacuum when pumping.

✔️ Moving the switch towards the handle will create pressure when pumping.

✔️ Measurement range: -1 to 3 bar

✨ Purpose / Application

The m.in diagnostics can be performed with a pump. the following systems and systems:

✅ Computerized engine control devices:

• barometric pressure sensor (BARO)
• PVC system
• Exhaust gas recirculation system (EGR)
• thick-layer pressure sensors (MAP)

✅ Ignition control devices:

• vacuum ignition advance
• Delay valve: SDV, RCV

✅ Brake system:

• Classic brakes
• ABS brakes
• pneumatic brakes
• brake lines
• Brake servo

✅ Other systems:

• air conditioning
• cruise control
• fuel tank and fuel system
• vacuum door closing system

✅ Usage

• Diagnostics of exhaust gas recirculation (EGR) system
• The EGR system valve is an example of a vacuum actuated valve. In the absence of vacuum, the valve is closed and exhaust gases do not escape from the valve. If a vacuum is brought to the valve, it is opened, allowing exhaust gases to recirculate.

✅ Diagnostics of thick-layer pressure sensors (MAP)

• Assemble the pump and tank system, as in the case of brake caliper venting, and then connect to the sensor vacuum connection.
• Press the pump lever until the hand shows -0,5 bar. Finish pumping and observe the hand, it should be stationary. If the hand moves, it means damage to the MAP sensor.
• During operation, the MAP sensor sends feedback signals to the control computer. The signal has a frequency between 85 Hz and 160 Hz depending on the vacuum level. A frequency meter is necessary to measure the frequency, it must be connected according to the instructions of the sensor and meter.

✅ Ventilation of brake calipers.

• Ensure that the brake system expansion tank is filled with fluid to the nominal volume.
• Venting should be carried out in the following order:
• brake pump, if equipped with a vent valve
• Brake calipers in order from the nearest brake pump to the furthest
• Connect the short flexible hose to the connection located on the bottom of the pump tank cover.
• Close the pump tank with the lid.
• Connect long flexible wires to the cover connections. The end of one of the long hoses connects to the pump and the other to the vent valve (calamite) of the brake caliper. Use an adapter if necessary.
• Press the pump lever 10 - 15 times to create a vacuum in the pump tank.
• Unscrew the vent valve by 1/4 - 1/2 turn, so that the pump tank fills with liquid to a height of about 5 cm. Tighten the vent valve.
• Disconnect the pump hose from the vent valve, the clamp venting procedure is completed.
• Before repeating the venting procedure in the next caliper, empty the pump tank from the brake fluid and replenish the brake fluid level in the brake system to the nominal level.

• Working pressure: 1-3 bar
• Measurement range: -1 ~ 3 bar
• Unit of measurement: PCE
• Weight: 2

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With VAT invoice
Parametry	Brand	Yato
Parametry	Manufacturer code	YT-0674
Parametry	Product weight with unit packaging	2 kg
Parametry	EAN (GTIN)	5906083906749
Parametry	Number of items in the set	22