Padangų keitimo rinkinys 2T su trapeciniu svertu ir teleskopiniu raktu

Trumpai apie prekę

Prekė: Padangų keitimo rinkinys 2T su trapeciniu svertu ir teleskopiniu raktu. Kategorija: Trapeciniai keltuvai.

• Gamintojas: Redats
• Modelis: 07-05-74

Brand: REDATS

Symbol: 07-05-74

Lift for lifting: Rattle

Minimum height: 110 mm

Maximum height: 420 mm

Maximum lifting capacity: 2 t

Weight: 2,4 kg

Included:

• Trapezoidal lift
• Rattle 340 mm
• Telescopic wrench 1/2 350 mm - 500 mm
• Caps 17, 19, 21, 23
• Protective cover
• User manual

Which cars?

The lifting capacity of up to 2000 kg allows you to lift most passenger cars without any problems.

Scope of work:

• Minimum height: 110 mm
• Maximum height: 420 mm

You can easily lift the car enough to comfortably replace the wheel – both at a standstill and on the road.

Convenient service

The set includes a rattle with a length of 340 mm, which facilitates quick and convenient lifting. You do not have to bother with an uncomfortable bar – here everything works lightly and precisely.

Complete set, ready to use:

• Trapezoidal lift 2T
• Rattle 340 mm
• Telescopic wrench 1/2" (350 – 500 mm)
• Caps: 17, 19, 21, 23 mm
• Protective cover
• User manual

FAQ

What cars is the REDATS 2T trapezoidal lift suitable for?

The lift will lift passenger cars weighing up to 2 tons. It is primarily suitable for lifting passenger cars.

Will I slide the trapezoidal lift REDATS 2T under a low car?

The minimum lift height is 110 mm so it will work for low cars. Before use, however, check the ground clearance in the supported vehicle.

What kind of work on the car will the trapezoidal lift REDATS 2T be useful for?

It will be most useful for emergency wheel replacement and other short work requiring lifting one side of the car. With its compact design, you can carry it in your trunk as an emergency equipment.

Can you leave your car on a trapezoidal lift for a long time?

No, the lift is for emergency replacements. If you need to lift the car for longer, support it on the mare and do not leave the weight only on the lift.

How to properly position the lift under the car?

Set it on a hard, even ground exactly below the support point indicated by the car manufacturer. Before lifting, pull the handbrake and make sure the lift is stable.

Does the operation of the REDATS 2T trapezoidal lift require a lot of force?

No, thanks to the rotating crank, you do not have to use a lot of force when lifting the car. The screw mechanism gradually lifts the vehicle at the next crank speed.

Will the REDATS 2T trapezoidal lift work for emergency wheel replacement?

Yes, this lift is ideal for emergency wheel replacement. It is compact, so you can easily fit it in the trunk.

Specifications