Titano grąžtai ARTU, 5 vnt., akmeniui, keramikai, plienui

Trumpai apie prekę

Prekė: Titano grąžtai ARTU, 5 vnt., akmeniui, keramikai, plienui. Kategorija: Grąžtai.

• Gamintojas: Artu
• Modelis: TKPL5

German company ARTU Werkzeuge is a manufacturer of high quality tools for drilling, machining, cutting hardened steel, stoneware, ceramics, concrete, glass, etc.

Branded product of the German company ARTU Werkzeuge. Professional carbon-titanium drill bits ARTU CV Profi for hardened steels

Very durable drill bits for extreme applications.

• Drilling in hardened steels (70 HRC) in broken drills, taps, springs, bearings, etc. reinforced concrete, border, stoneware, ceramics (NOTE! drilling column drill).
• They are great for impact drilling.
• They are not suitable for drilling in soft steels.

APPLICATIONS AND DRILLING METHODS DEPENDING ON THE MATERIAL BEING DRILLED:

• all types of hardened steel

We use speeds from 2000 rpm. double-sided printing (duplex): yes We use a stationary drill. It is recommended to cool with emulsion or oil.

• stone, concrete

We use speeds from 1000 to 1500 rpm. /min. using or not hammering. For granite drilling, the rotation speed should not exceed 500 rpm. double-sided printing (duplex): yes Water cooling indicated.

• glaze, marble

The rotational speed should not exceed 1200 rpm. double-sided printing (duplex): yes Before starting the drill, you need to set the drill very carefully.

• porcelain, ceramics, stoneware

We drill slowly using low rotation speed and minimal pressure. It is beneficial to use a set of drills. We start drilling with a small diameter, after which we ream the hole to the desired dimension.

• glass, crystal

We use speeds up to 500 rpm. double-sided printing (duplex): yes We drill slowly with minimal pressure, preferably using a drill with smooth rotation adjustment. The drilled material should be rigidly fixed. In the case of drilling glass plates, it is necessary to provide support over the entire surface. For cooling we use kerosene or turpentine.

Set of 5 ARTU CV Profi drill bits:

4x80 mm, 5x90 mm, 6x100 mm, 8x120 mm, 10x120 mm

You buy from a direct importer of the German company ARTU. We have been in the tool market since 1990. We have different drill bits, in many sizes.

We have other ARTU drills from 3 mm to 24 mm.

We invite you to watch the video showing the possibilities of ARTU drills:

https://youtu.be/6HloWb3skWg (please select with your mouse and copy the link to your browser)

Film showing drilling in bearing:

https://youtu.be/cyH0cnGs6_M

Film showing drilling in file:

https://youtu.be/oJiw7rH18I4

Specifications