Tinklo jungiklis PoE, 3 prievadų, 10/100 Mb/s, BCS BCS-xPoE3 EXT-AT

Trumpai apie prekę

Prekė: Tinklo jungiklis PoE, 3 prievadų, 10/100 Mb/s, BCS BCS-xPoE3 EXT-AT. Kategorija: Jungikliai ir koncentratoriai.

• Gamintojas: BCS
• Modelis: BCS-xPoE3EXT-AT

Main features:

• miniature design allows installation in a can under the camera
• possibility of powering 2 PoE 802.3at/af or PASSIVE receivers
• clear, optical signaling of power supply and data transmission status
• possibility of power supply from another 802.3at/aflub PoE PASSIVE switch (PoE IN port)
• up to 50W total power for all ports
• electronic fuse at PoE IN input
• possibility of cascade power supply (one switch powers another)
• easy and quick start-up without the need to configure parameters
• very low power consumption (< 1W)

PoE switch 3 port 10/100Mbps, extender (1×PoE 802.3at/af + 2×PoE OUT), powered by PoE (max 50W). BCS-xPoE3/EXT-AT is an unmanaged PoE network switch operating as a LAN extender (repeater) and PoE power supply. The device regenerates the network signal and transfers PoE power to selected outputs. Most often used as an "amplifier" for extending the network on sections longer than 100m. In addition, it is ideal as an "active splitter" in situations where we need to run several PoE receivers on one UTP cable (e.g. several IP cameras), or when an additional network branch is needed. Unmanaged PoE switches without xPoE series power supply are designed to work with IP cameras and other network devices powered in PoE 802.3at/af and PoE PASSIVE standards. The device has a very small size, which allows for easy installation in small spaces.

POWER OVER ETHERNET

The switch supports PoE technology, thanks to which you can power compatible devices using Ethernet twisted pair and reduce the amount of wiring.

• LAN ports: 3 RJ45 10/100Mbps ports (auto MDI-MDIX, auto-negotiation)
• Port functions: LAN 1: PoE INPUT (switch power supply): PASSIVE (up to 50W) or 802.3af (up to 15.4W) or 802.3at (up to 30W) PoE PINS: 1.2 (V+/-) 3.6 (V+) /-) and/or 4.5 (V+/-) 7.8 (V+/-) LAN 2: PoE OUTPUT (power supply for PoE receivers): PASSIVE (up to 50W), 802.3af (up to 15.4W), 802.3at ( up to 30W) PoE PINS: 1.2 (V-) 3.6 (V+) and 4.5 (V+) 7.8 (V-) LAN 3: PoE OUTPUT (power supply for PoE receivers): PASSIVE (up to 50W), 802.3af (up to 15.4W), 802.3at (up to 30W) PoE PINS: 4.5 (V+) 7.8 (V-)
• Selection of PoE standard (at/af): LAN1 (PoE IN): automatic, default 802.3at if supported by power switch
• Power supply voltage: LAN1: 35 ... 56 VDC (Vin)
• Output voltage: Vout = Vin For PoE receivers 802.3at/af Vin > 44VDC
• Power consumption: 0,8 W
• Port protection: LAN 1 ... LAN 3: LAN surge protection 1: Overload protection 1A with auto back
• Work signal: LED in RJ45 connectors: LAN 1 ... LAN 3 (yellow) - presence of PoE power on LAN 1 ... LAN 3 LAN 1 ... LAN 3 (green) - link and data transmission on LAN 1 ... LAN 3
• Working temperature: -25°C ~ +65°C
• Dimensions: 51 × 51 × 23 mm
• Weight: 0.042kg

Specifications