Tiesioji frezavimo staklių šlifuoklis, 7000–34000 RPM, 6 mm kotas

Trumpai apie prekę

Prekė: Tiesioji frezavimo staklių šlifuoklis, 7000–34000 RPM, 6 mm kotas. Kategorija: Tiesieji šlifuokliai.

• Gamintojas: Wuber
• Modelis: W25006 SZLIFIERKA TRZPIENIOWA PROSTA FREZARKA
• Įtampa: 230 V

► Power 550 W | ► 7000-34 000 rpm | ► 6-stage rotation adjustment | ► Terminal bushing 6 mm | ► Reinforced stem | ► Max. Grinding diameter 38 mm | ► Neck 131 mm | ► Switch with continuous operation | ► Cable 3 m | ► Spare carbon brushes included

🥇 Reinforced shank with thickened walls - this solution is usually found in more expensive grinders. In the WUBER grinder you have them at an affordable price.

⚙ Technical specification

• Producer: WUBER
• Model: W25006
• Product Type: Electric Shank Grinder
• Supply voltage: 220-230 V / 50 Hz
• Power: 550 W
• Rotation speed: 7000-34 000 rpm
• Speed control: Yes - 6 settings (7000 / 12 500 / 18 000 / 23 500 / 29 000 / 34 000 rpm)
• Maximum grinding diameter: 38 mm
• Tool mounting diameter: 6 mm
• Tool neck length: 131 mm
• Body diameter at grip point: 63 mm
• Switch: Slide, with continuous operation position
• Cable length: 3 m
• Weight: 1,75 kg

⭐ Rotation control and tool guidance

✅ Power 550 W ► The engine has a power reserve for deburring steel.

✅ Rotation speed up to 34 000 rpm ► High revolutions allow for smooth grinding.

✅ 6-step rotation adjustment ► You go down to 7000 rpm with the materials so as not to melt the material.

✅ Printed numbers on the knob ► You return to the same speed at the next detail.

✅ Tool neck 131 mm ► You slide the tip into the profile and the hand stays outside the workpiece.

✅ Weight 1,75 kg ► You drive the tool with one hand without fatigue with its weight.

⚡ Tip fixing and operation

✅ Terminal bushing 6 mm ► You can attach grinding stones, cutters and mandrel brushes in it.

✅ Reinforced stem ► Bold walls are characterized by high resistance to side pressure.

✅ Maximum grinding diameter 38 mm ► You also assume wider grinding wheels, thanks to which you process a larger surface area with one pass.

✅ Continuous operation ► You do not have to hold the trigger all the time when grinding large areas - this increases your convenience.

✅ Spare carbon brushes included ► You replace them yourself, without putting the grinder into service.

✅ Cable 3 m ► Long cable reduces the need for an extension cord.

⭐ You can use the mandrel grinder to:

► Deburring edges after cutting metal

► Grinding of welding welds

► Removing rust and old coatings

► Light wood milling

► Smoothing of plastic elements

⚡ Why should you choose our equipment?

✔ Our shank grinders are made of reinforced shank with thickened walls and 6 mm collet tightened with a nut.

Thanks to this, are the most advantageous in their price range.

► The 550 W engine has a power reserve for deburring steel.

► The knob with 6 settings selects the speed from 7000 to 34 000 rpm.

► The switch stays in the continuous operation position, without holding a finger.

► Bushing 6 mm adopts popular stones, cutters and shank brushes.

► You replace the carbon brushes yourself.

⭐ Six speed settings on one knob

The knob on the back of the body has numbers 1 to 6 printed on it. One is 7000 rpm, six is 34 000 rpm.

What do you gain?

You grind steel with high rotations, soft plastic with low. You set the number under the material and do not burn the treated surface.

⚡ Reinforced stem

The stem of our grinder has thickened walls. Reinforced shank is a solution usually found in more expensive grinders - in the WUBER you have them at an affordable price.

The effect?

The shank is characterized by high strength and transfers the lateral pressure that appears when guiding the cutter along the edge.

⭐ Reach where the hand does not enter

The tool neck measures 131 mm from the sleeve nut to the gear body. The body itself is 63 mm in diameter.

What do you gain?

You cover the body with your whole hand and insert the the neck itself into the profile or recess, so that the hand does not rub against the workpiece.

⚡ Continuous operation without holding the trigger

The slider switch with lock allows continuous operation without having to hold the trigger.

This convenient solution protects the thumb from fatigue, which you will appreciate especially when grinding large areas.

⭐ 6 mm clamping sleeve and two keys

The working tip is held by a nut-tightened clamping sleeve. With one key you lock the spindle, with the other you tighten the nut.

What do you gain?

The 6 mm shank is the most common grip size in grinding stones, cutters and brushes, so you can buy matching tips without looking for rare sizes.

⚡ Maximum Grinding Diameter 38 mm

The spindle accepts grinding heads with a working diameter up to 38 mm.

Result?

You have plenty of room to adjust the grinding heads. With a wider grinding wheel, you remove material across the entire weld width in a single pass, allowing you to finish the machining faster.

⭐ Simple replacement of carbon brushes

Carbon brushes wear out in any engine of this type. In the set you get a second pair.

What do you gain?

You replace them alone and the grinder returns to work on the same day.

✔ Set includes:

► 1x WUBER W25006 Shank Grinder

► 2x Wrench for replacing working tips

► 2x Carbon Brush

► 1x User manual in Polish

► 1x Manufacturer's packaging

⚠ Working tips are not included in the set: grinding stones, cutters and mandrel brushes are selected by yourself for the material being processed.

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With VAT invoice
Parametry	Brand	Wuber
Parametry	Kind	straight grinder
Parametry	Power supply type	mains
Parametry	Maximum power	550 W
Parametry	Supply voltage	230 V
Parametry	Maximum speed	34000 RPM
Parametry	Device weight	1.75 kg
Parametry	Collet diameter	6 mm
Parametry	Abrasive clamping system	clamp fastening
Parametry	Product weight with unit packaging	2.12 kg
Parametry	Manufacturer code	W25006 SZLIFIERKA TRZPIENIOWA PROSTA FREZARKA
Parametry	EAN (GTIN)	5906436762022
Parametry	Width of grinding surface	38 mm
Parametry	Power cord length	3 m
Parametry	Device width	6.3 cm
Parametry	Length of grinding surface	38 mm
Parametry	Device length	37 cm
Parametry	Series	25006 SZLIFIERKA TRZPIENIOWA PROSTA 550W
Parametry	Device height	7 cm
Parametry	Type	single
Parametry	Batteries included	no
Parametry	Packaging status	original
Parametry	Additional information	dry sanding possible,speed regulator