Pristatymo terminas kiekvienai prekei nurodomas prie kainos bloko.
Pristatymas visoje Lietuvoje: nemokamas.
Trumpai apie prekę
Prekė: TDS matuoklis su temperatūros, osmoso ir kietumo matavimu. Kategorija: Atvirkštinio osmoso sistemos.
- Gamintojas: TDS&EC
- Modelis: DOKŁADNY TESTER AKOŚCI WODY PITNEJ TWARDOŚCI
Easy to use, modern, electronic TDS meter. Thanks to the meter, it is possible to measure the following parameters very accurately:
- - TDS (ppm),
- - conductivity (μS)
- - water temperature (OC).
If you own a RO system, you can now quickly and easily check the condition of the RO membrane. Based on the results of the tester, it is possible to determine whether the osmotic membrane is working properly. If you do not have an RO filter, you can examine the water status, e.g. in the tap.
Clean water has a very small amount of dissolved substances, so the result given in ppm or μS should be at a low level, as the amount of dissolved substances increases, the tested water sample will have greater TDS and conductivity.
The TDS measures the amount of salt dissolved in water or its conductivity, the lower the result of both parameters, the cleaner the water. The meter can also be used to measure raw water.
- Electrical Conductivity (EC): 0-9999 µS/cm
- Water pollution (chemical concentration measurement) TDS (Total Dissolves Solids): 0-9999 ppm
- Working temperature: 0,1-80°C Fahrenheit: 32-176°F
- Accuracy: ± 2% (0-2000 ppm); ± 5% (2000-9999 ppm)
- Temperature measurement in degrees °C or °F
- Automatic liquid temperature compensation (ATC)
- Automatic measurement memory after reading stabilization
- Factory brand new product (calibrated - 342 ppm NaCl solution)
- Dimensions: 154x30x15 mm
- Weight: 46g (83g with cover)
- Power supply: 2*1,5V LR44 (battery included)
- Remove the protective cap. Turn on the meter with the "ON / OFF" button
- Dip the meter into the test liquid (do not cross the immersion line).
- Wait for the displayed value to stabilize (less than 5s), then read the value from the display or press the HOLD button and read the result away from the measured liquid.
- After the measurement is completed, wipe the electrode with a cloth. Turn off the meter with the "ON/OFF" button. Put on a protective cap.
Specifications
| Group | Name | Value |
|---|---|---|
| Parametry | Condition | new |
| Parametry | Invoice | Without VAT invoice |
| Parametry | Brand | TDS&EC |
| Parametry | Dominant color | white |
| Parametry | Model | DOKŁADNY TESTER AKOŚCI WODY PITNEJ TWARDOŚCI |
| Parametry | Product weight with unit packaging | 0.06 kg |
| Parametry | Manufacturer code | 1562 |