Suvirinimo inverteris 250A MIG/MMA/TIG 3 viename, su dujų funkcija

Trumpai apie prekę

Prekė: Suvirinimo inverteris 250A MIG/MMA/TIG 3 viename, su dujų funkcija. Kategorija: Pusiau automatiniai suvirinimo aparatai.

• Gamintojas: Mar-Pol
• Modelis: M79367
• Ilgis: 420 mm
• Plotis: 220 mm
• Aukštis: 300 mm

Every even the simplest INVERTER is incomparably BETTER than even the most expensive outdated transformer

The inverter does not splash, does not leave "balls" , melts the material well, creates a nice weld without much welder experience after proper amperage setting

The main advantages of inverters:

✔ HIGH EFFICIENCY

✔ low energy consumption

✔ possibility of working on extension cords and fuses 16A 20A

✔ low weight

✔ high quality weld

✔ possibility of working with power generators

✔ automatic settings and functions for improved working comfort

✔ possibility of MIG MAG MMA FCAW TIG welding after using accessories

• MIG MAG - MIG MAG welding function with burner included
• MMA - MMA welding function with accessory included
• TIG LIFT - TIG welding function with additional accessory
• Active cooling Active cooling - INCREASES EFFICIENCY TO MAX!
• TWO-BAR 2T/ FOUR-BAR 4T

✔ operating mode selector button 2-bar / 4-bar

✔ adjustment knob for welding current 20-220A (MMA) and wire feed speed 2-13 m/min (MIG)

✔ knob regulation of voltage of welding current (MIG) 14-60V

✔ select button for welding method MIG/MMA/TIG

⭐ TWO-BAR 2T - pressing the button initiates gas outflow and welding current, releasing the button turns off welding current and gas outflow

⭐ FOUR-BAR 4T - pressing and releasing the handle button initiates gas outflow and welding current, re-pressing and releasing the button turns off the welding current and gas outflow.

✔ Brand: MAR-POL

✔ Model: M79367

✔ Power supply: 230 V

✔ Frequency: 50 Hz

✔ Insulation class: H

✔ Input power: MIG 4,5KVA/ MMA 4,6KVA /TIG 2.8KVA

✔ Voltage without load: 62 V

✔ Power distribution: MIG 250A

✔ Power distribution: MMA 220A

✔ Current system: TIG 220A

✔ Rated duty cycle: 60%

✔ Degree of protection: IP21S

✔ Weight: 15.5kg

✔ Supported wire diameters: 0,8 / 1,0 mm

✔ Supported electrode diameters: 1.6 mm - 4 mm

✔ Supported wire spools: max. up to 5 kg

✔ Wire feeder: 2 - roller ( internal )

✔ Dimensions: 42 x 22 x 30 cm [L / width / H ]

✅ EURO MIG / MAG handle: 290 cm

EURO SOCKET AND HOLDER

The presented model of the welding machine has a standardized EURO socket, thanks to which we can connect any MIG/MAG welding torch that has this plug to the device.

CHANGE IN WELDING POLARITY

Migomat allows welding with self-shielding wire without the need for shielding gas.

FLUX welding combines the advantages of MIG/MAG welding (wire wound on a spool, is fed using a feeder to the handle) and MMA (there is no need for shielding gas).

The welder is equipped with a professional wire feeder, which guarantees stability and continuity of operation of the device.

The 2-roll feeder allows precise extension of the welding wire excluding its slippage.

The feeder has a quick wire change knob as well as a wire feed roller

thanks to its design, it can be used both in home workshops and households, as well as in more professional applications, such as performing field work and all types of repair work inside buildings.

The electronics of the device are based on IGBT transistors combining the advantages of two types of transistors, the ease of control of field transistors and high breakdown voltage and the switching speed of bipolar transistors. The welding current is very stable, which guarantees a perfect weld. Thanks to IGBT technology, the device is lightweight and compact.

✔ MIGOMAT MAR-POL M79367 WELDING MACHINE

✔ PRACTICAL WELDING MASK

✔ BRUSH WITH HAMMER

✔ MASS CABLE WITH A LENGTH ( 220 cm )

✔ MMA ELECTRIC HOLDER ( 230 cm )

✔ 2 CURRENT TERMINALS

✔ EURO WELDING TORCH

consists of welding with an electric arc produced between the hot melt electrode and the welded material. The hot melt electrode is wire fed continuously. The arc and lake of liquid metal are protected by a stream of shielding gas.

Advantages:

• universal method - you can weld various metals and their alloys
• high welding efficiency - much higher than wrapped electrodes,
• Relatively low cost of welding materials
• good quality of welds

- (Flux Cored Arc Welding) - an abbreviation for the MIG/MAG (GMAW)-like welding method, except that instead of solid wire, core wire (powder) is used. If the wire is filled with powder producing protective gases during welding, the feeding of shielding gas from the outside (from the cylinder) is not required. This method is mainly used for welding responsible steel structures, pressure pipes, etc.

Advantages:

• can also be welded outdoors
• The welder does not have to be highly qualified

░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░

– arc welding method using a hot melt metal electrode covered with a flux sheath. The electric current produces an electric arc between the electrode and the joined metals. During welding, the sheath decomposes under the influence of high temperature, giving gaseous substances that serve as shielding gas and slag.

Advantages:

• the possibility of welding various types and grades of metals and alloys: non-alloy and alloy steels, cast iron, nickel, copper and its alloys;
• possibility of welding in any position, in field conditions
• high quality welds, good mechanical properties;
• possibility of welding thin elements (from 1,5mm) and thick

░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░

method of welding with a non-melting tungsten electrode in an inert gas shield, such as argon, helium or their mixtures Mostly. The tungsten electrode (TIG burner) is connected to the negative pole, and the mass clamp to the positive pole of the welding machine.

Advantages:

• best of all welding methods connection quality
• welding of elements with a wide range of thicknesses (the only method for welding and welding artistic details below 1 mm thick; only in impulse mode with a guide arc used for better targeting in place of the weld)

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With VAT invoice
Parametry	Brand	Mar-Pol
Parametry	Power consumption	4.6 kVA
Parametry	Supply voltage (V)	230
Parametry	Duty cycle time	60%
Parametry	Maximum electrode diameter	4 mm
Parametry	Wire diameter (mm)	0,6-1,0
Parametry	Device weight	15 kg
Parametry	Welding range	30–250 A
Parametry	Height	300 mm
Parametry	Length	420 mm
Parametry	Width	220 mm
Parametry	Length of ground cable	220 cm
Parametry	Welding cable length	230 cm
Parametry	Product weight with unit packaging	16 kg
Parametry	Manufacturer code	M79367
Parametry	EAN (GTIN)	5901969131710
Parametry	Welding methods	MIG/MAG,MMA,TIG
Parametry	Additional features	welding mask included,infinitely adjustable welding current,EURO handle,LCD display