Suvirinimo aparatas WELDMAN BRAVO TIG 250 AC DC PULSE MMA 230V HF

Trumpai apie prekę

Prekė: Suvirinimo aparatas WELDMAN BRAVO TIG 250 AC DC PULSE MMA 230V HF. Kategorija: Pusiau automatiniai suvirinimo aparatai.

• Gamintojas: Weldman
• Modelis: SPAWARKA TIG ALUMINIUM 250A

THE MOST POWERFUL TIG 250A POWERED BY 230V - IDEAL FOR REPAIRING ALLOY WHEELS

Manufacturer: WELDMAN ║ Welding methods: TIG AC/DC, PULS, MMA ║ Power supply: 230V ║ Welding current: 250A ║ Efficiency: 60%

• THE MOST POWERFUL welding machine on the market - 250A powered from 230V mains
• Spot welding SPOT - bonding
• Full panel TIG - easy selection of parameters
• Advanced features: MIX TIG, AC waveform change
• Ability to save 10 programs in memory in devices
• IGBT transistors of the latest generation
• Solid workmanship and reliability!
• Ideal for small workshops and production plants.
• Contactless arc initiation - HF ionizer
• Selection of electrode diameter from the control panel - easier welding

WELDMAN BRAVO TIG 250 AC/DC is a welding machine made in IGBT inverter technology. It is used for manual TIG welding of each alloy of aluminum, steel, copper alloys and other weldable materials with a maximum current of 250A with an efficiency of up to 60%. Thanks to this, we have the ability to work in long cycles without worrying about turning off or overheating the device. We also gain the ability to adjust the current during welding. WELDMAN BRAVO TIG 250 AC/DC guarantees high quality welds. Built-in settings memory gives you the ability to remember 10 sets of presets.

POWER SUPPLY PARAMETERS

• Power supply: 230V
• Frequency: 50Hz
• Number of phases: 1ph
• Idle current voltage: 70V
• Network security: 25A

TECHNICAL PARAMETERS MMA

• MMA welding current: 5-200A
• MMA work cycle: 60%
• MMA welding current voltage: 20,2 - 28V

TECHNICAL PARAMETERS TIG

• TIG welding current: 5-250A
• TIG duty cycle: 60%
• TIG welding current voltage: 10,8 - 20V
• AC frequency: 20-200Hz
• AC current balance: -40. . +40%
• AC polarity symmetry: -50...+30%
• Frequency range MIX TIG: 0,1-5Hz
• Pulse frequency: 0,2-20 Hz
• Pulse width: 1-100%
• Electrode diameters: 1,6/2,0/3,2/4,0mm

ADDITIONAL FUNCTIONS

• PULSE function: YES
• HF function: YES
• 2T/4T function: YES
• Way shape selection: YES

PHYSICAL PARAMETERS

• Isolation class: IP21S
• Degree of protection: H
• Mass: 24,5kg
• Dimensions: 520x240x450mm

INTUITIVE OPERATION - The device has the latest technology clear and transparent "soft panel". Parameter adjustment is carried out using a multifunctional knob and dedicated buttons, which makes setting the welding machine easy and intuitive, even in welding gloves. The use of such a solution guarantees rapid adjustment of the current to changes in parameters during welding.

PULS - Thanks to the pulse welding function and the ability to adjust its parameters, we have an impact on the focus of the arc and the shape of the weld, as well as the possibility of welding thin elements. Pulse current prevents burning during welding of thin material (less than 1,5 mm thick) or discoloration of material (when welding stainless steel). We gain a clean and good quality weld. The arc is ignited using a built-in HF ionizer, which allows for contactless ignition of the welding arc .

TIG MIX AND WAVEFORM SELECTION - The welder has an innovative TIG MIX function, which combines the advantages of AC alternating current welding (obtaining a very clean weld) with the deep penetration obtained during DC DC welding. As a result, we will get a very good quality weld on thin and thick materials. In addition, we can choose the AC waveform from four available: trapezium, rectangular, triangular, sinusoidal.

DIAMETER OF TUNGSTEN ELECTRODE - The device has the option of selecting the thickness of the tungsten diameter used from the control panel. The welder, after selecting the appropriate diameter, thanks to the built-in HF system, rounds the tip of the electrode. The use of this function allows you to choose the optimal diameter of the electrode for a given amperage.

The welding machine is equipped with a professional welding torch TIG type SR 26, with a length of 4m. The handle cable is equipped with a handle with a joint, so it does not restrict movement and greatly facilitates work. Advantages of the handle:

• gas cooling - does not require a radiator!
• length 4m - work without rearranging the welding machine
• handle with joint - does not restrict movement
• type SR 26 - high current efficiency and easily accessible parts

REMOTE CONTROL

A big advantage of the welding machine is the function of adjusting the welding current using the remote control pedal. Thanks to this, it is possible to remotely, wired regulation of welding current. Remote control will work well for work where frequent changes in current are needed, e.g. welding of rims or aluminum construction. The remote control pedal is not included in the equipment, but is available at our other auctions.

SET INCLUDES:

• WELDMAN BRAVO TIG 250 welding machine
• Welding torch TIG type SR 26 - 4m
• Bulk holder - 2m
• Electrode holder - 2m
• Operating manual and warranty card

+ ADDITIONAL ACCESSORIES:

• Gas hose - 1pc.
• Operating elements of the TIG handle (cork, connector, bushings, ceramic nozzles)

Specifications