Suvirinimo aparatas SPARTUS EasyMIG 210S su TIG funkcija, skydeliu ir dujų balionu

Trumpai apie prekę

Prekė: Suvirinimo aparatas SPARTUS EasyMIG 210S su TIG funkcija, skydeliu ir dujų balionu. Kategorija: Pusiau automatiniai suvirinimo aparatai.

• Gamintojas: Spartus
• Modelis: Spartus 210s_set2

Welding methods: MIG/MAG, FLUX, MMA, TIG Lift | Power supply: 230V | Maximum current: 200A | Working cycle: 60% | DISPLAY | SYNERGY |

SPARTUS® EasyMIG 210s is a modern, inverter semi-automatic welding machine, based on IGBT transistors. It has the function of inert and active gas shield welding (MIG/MAG), wrapped electrode welding (MMA) and TIG Lift welding with arc ignition by rubbing. Easy polarity change allows welding with self-shielding wire without gas.

The maximum welding current for MIG/MAG/TIG methods is 200A and 160A for MMA method. The power supply device is from a single-phase 230V network.

The set includes:

• Device SPARTUS EasyMIG 210S
• Welding torch SPARTUS MIG SPE 150 3m
• Electrode cable
• Bulk cable
• Gas hose
• User manual

• Gas cylinder of choice CO2 or Argon/CO2
• Handle TIG SR-17V 4m
• 1x Gold electrode 2,0mm
• Reducer Ar/CO2 MINI
• Welding visor ESAB ECO ARC
• Welding wire SG2 5kg 0.8mm
• Set of magnetic angles (11, 22, 33 kg)
• Handle accessories: 2x MB-15 gas nozzle, 3x 0,8mm tip, 1x current connector
• Welding gloves
• 2x Anti-chipping spray preparation SPAWMIX

SPARTUS® EasyMIG 210s is equipped with a synergic MIG/MAG welding system with steel wires with a diameter of 0,6 / 0,8 /1,0 mm with the possibility of manual parameter correction.

Thanks to the use of modern technological solutions, the welding machine has a number of functions supporting the welding process:

• 2T/4T – the ability to choose one of two operating modes (MIG/MAG)
• regulation of welding inductance – control of face width and melting depth (MIG/MAG), limitation of welding chipping
• Hot Start – easier electrode ignition (MMA)
• Arc Force – easier welding in forced positions (MMA)
• VRD – reduced idle voltage (MMA)

SPARTUS® EasyMIG 210s is equipped with a synergistic system for welding MIG/MAG with steel wires with a diameter of 0,6 / 0,8 /1,0 mm with the possibility of introducing manual correction parameters.

EURO HANDLE - universal connector for easy and quick disassembly or replacement of the handle.

SPARTUS EasyMIG 210S has a built-in professional two-roll feeder, provides liquid and even feed wire welding. Stable output parameters guarantee high quality spoiny.

Examples of applications:

• Light industry
• Renovation work in the field
• Workshop
• Automotive
• Welding of silencers

The light weight and dimensions make the EasyMIG 210S a handy welding device.

• Power supply voltage: ~1× 230V ± 10% 50 / 60 Hz
• MIG welding current: 50 - 200A
• MIG duty cycle: 60%
• Output voltage: 16.5 - 24V
• Type of feeder: built-in, 2 - roller
• Wire feed speed: 2 - 12.5m/min
• Wire spool: ≤ 5kg / ∅200mm
• Wire diameter: 0.6, 0.8, 1.0mm
• Synergy: yes
• Working mode 2T/4T: yes
• Additional MIG functions: inductance adjustment, wire test, polarity change
• TIG Lift: yes
• TIG welding current: 10 - 200A
• MMA welding current: 10 - 160A
• Arc Force: yes
• Hot Start: yes
• VRD: yes
• Power consumption: MIG 35A / TIG 26A / MMA 33A
• Power factor (cosφ): 0.76
• Efficiency η: 85%
• Isolation class: H
• Degree of protection: IP21S
• Weight: 9 kg
• Dimensions: 47 x 19 x 30 cm

TIG LIFT - TIG welding using a handle with a gas valve. The arc is then ignited by rubbing the tungsten electrode against the welded material.

Universal TIG handle for welding with MMA or MIG/MAG devices by rubbing arc (TIG Lift). Gas control is possible by unscrewing the valve placed on the handle. The gas cable has a plug end for quick coupler type 26.

The holder is ready for operation - contains a set of consumable parts (does not include an electrode).

Connecting TIG handle in MMA and MIG/MAG devices:

1. The current plug of the TIG holder is connected to the negative pole (-)
2. Connect the mass cable plug to the positive pole (+)
3. The gas hose should be connected directly to the reducer by using a quick coupler or clamp band.

The new, lightweight Ar/CO2 cylinder contains 8l (1.5 m3) of a high-quality mixture of 82% argon and 18% CO2 used in welding and industry.

Protective cap protects the valve from damage during transport or storage. The cylinder is full, factory new and has an operating pressure of 150 bar. The cylinders have 10 years of legalization, meet the standards EN-1964-1 and have a mark Π which allows them to be used and filled in all EU countries.

The standard W 21.8x1/14 thread for this type of gas allows the use of Ar/CO2 reducers available on the market with most of them.

• Capacity: 8 liters
• Working pressure: 150 bar
• Trial pressure: 250 bar
• Thread on valve: W 21.8x1/14
• Amount of gas: ok. 1,5 m3
• Diameter: 136 mm
• Height: 820 mm
• Painting: powder in accordance with PN-EN standards
• Mass: ok. 15 kg

The cylinder contains 8 litres / 6kg of high-quality CO2 carbon dioxide for welding and other industrial applications. Protective cap protects the valve from damage during transport or storage.

The bottle is brand new and contains 6kg of CO2. The cylinder and valve are made in accordance with EN 1964: 1999, and have the π (pi) mark of conformity with the requirements of ADR/RID.

• Capacity: 8 liters
• Maximum working pressure: 200 bar
• Amount of gas: 6 kg
• Diameter: 136 mm
• Height: 820 mm
• Weight: 18 kg

After purchase, please inform us about the selected cylinder.

Cylinder reducer for Argon/CO2, with rated inlet pressure 200 bar with outlet pressure regulation. It allows you to reduce the pressure of gases taken from the cylinder to the required outlet pressure (working pressure) and ensures that this pressure is maintained as constant as possible regardless of changes in the inlet pressure.

• Gas type: Carbon dioxide (CO2), Argon (Ar)
• Thread at inlet: W21,8 x 1/14 (Standard)
• Thread of nut at outlet: G 1/4 (Standard)
• Outlet connector: FI 6,3mm
• Inlet pressure: 200 bar
• Exhaust pressure: 4 bars
• Capacity: 12l/min
• Package size: 14 x 13 x 15 cm
• Weight: 0,75 kg

Passive welding visor ESAB ECO ARC II with a constant degree of protection DIN 11. The construction of the mask allows you to replace the filter with a different darkening (easily available dimension 110 x 90).

The visor is designed to protect your eyes and face from sparks, chipping, and harmful radiation during welding and grinding. Thanks to the light weight of the visor and the adjustable head, the welder has two hands free.

Equipped with a convenient header that can be set in 4 different ways.

• Filter: DIN 11
• Field of view: 110 x 90 mm
• Headline: regulated
• Tilting flap with filter

Electrode wire manganese - silicon, copper, designed for MIG/MAG welding of low-carbon structural steels and fine-grained manganese carbon steels.

It allows the use of both high current intensities at the spray arc and low in short-circuit metal transfer.

High-quality wire enjoys a deservedly very good reputation, which is due to the high quality of feeding, the stability of the arc and its characteristics.

FILL CLASSIFICATION:

• EN ISO 14341-A-G 42 4 C1/M21 G3Si1

Typical chemical composition of binder (%):

• C: 0,1
• Si: 0,85
• Mn: 1,4

Package dimensions: 21 x 22 x 7 cm

A set of three magnetic welding angles designed to support the welded material in one plane or at an angle of 90 and 45 degrees.

The set includes three angles with different lifting capacities:

• 11 kg
• 22 kg
• 33 kg

Pack size (3 pcs. ): 24 cm x 17 cm x 7 cm

Specifications