Suvirinimo aparatas SHERMAN MIG 200HD 230V 200A SYNERGY MMA TIG FLUX

Trumpai apie prekę

Prekė: Suvirinimo aparatas SHERMAN MIG 200HD 230V 200A SYNERGY MMA TIG FLUX. Kategorija: Pusiau automatiniai suvirinimo aparatai.

• Gamintojas: Sherman
• Modelis: MIG 200HD
• Ilgis: 450 mm
• Plotis: 210 mm
• Aukštis: 330 mm

• Welding methods: MIG/MAG, MMA, TIG DC (LIFT), SYNERGY, SOLDERING, FLUX
• Power supply: 230V
• Operating cycle 45% at maximum welding current 200A
• For welding: steel, aluminium, galvanized sheets
• SYNERGY - automatic selection of parameters
• Regulation of inductance
• Tactile arc initiation LIFT
• Possibility to connect the SPOOL GUN holder
• Settings memory - the ability to save 20 settings
• Professional, metal, 2-roll wire feeder
• Modes and functions: 2T/4T mode, HOT START, ANTI-STICK
• Cooling with fan
• Clean, aesthetic welds
• Made in IGBT technology

✔ FEATURES AND ADVANTAGES:

• INDUCTION ADJUSTMENT - the introduction of less heat prevents sheet deformation and damage to the zinc layer,

• LUTOSPELING - a method that uses less energy; for joining thin galvanized sheets, stainless steels, and various connections,

• TIG LIFT - arc glow by rubbing the electrode against the material; used in places where there is a risk of interference of electronics by high frequency current; welds are of high quality,

• SPOOL GUN - welding torch with built-in wire feeder, ideal for welding thin sheets; wire spool is in the handle,

• 2 TAKT - welding begins after pressing and ends after releasing the button,

• 4 TAKT - welding begins after the first press and release of the button, and ends after pressing again; more convenient with longer welds,

• FLUX - arc welding with powder wire without the use of a gas cylinder; self-shielding wire is filled with flux or a chemical substance generating protective gases,

• HOT START - a temporary increase in welding current during arcing; prevents "sticking of the electrode", facilitates the start of welding,

• ANTI-STICK - allows easy separation of the electrode from the welded material. In the event of a short circuit, the welding current is automatically reduced,

• IGBT- bipolar transistors increase the efficiency and reliability of the device, ensure lower power consumption.

⚙ TECHNICAL SPECIFICATION:

• Power Supply: 230V 50Hz (1ph)
• Network security: 25A
• Welding current: MIG/MAG: 30 - 200A | MMA: 20 - 180A | TIG: 20 - 200A
• Current at 45% MIG/MAG duty cycle: 200A
• Current at 60% MMA duty cycle, TIG: 180A
• MIG/MAG welding voltage: 15.5 - 24V
• Max. Power consumption: MIG/MAG, MMA: 33A | TIG: 24A
• Max. power consumption: 6.6kVA
• Idle voltage: 65V
• Wire feed speed: 2 - 15 m/min
• Spool with wire: up to 200mm; up to 5kg
• Wire diameter: 0.6 / 0.8 / 0.9 / 1.0 / 1.2 mm
• Degree of protection: IP21
• Dimensions: 45 x 21 x 33 cm
• Weight: 10.5kg

INCLUDED IN THE SET:

• Factory new reusable cylinder with a mixture of Ar (82%) / CO2 (18%) with a capacity of 8l; 10-year legalization, the possibility of filling at any point with technical gases,
• Gas hose with clamps - for connecting the reducer - 1pcs. ,
• Reducer with two pressure gauges - precise reducer with adjustment; for controlling the pressure in the cylinder and the amount of gas flowing out,
• Anti-chipping preparation - protects the nozzle and metal against welding chipping,
• Welding wire SG2 5kg - 1pcs ,
• Gloves welding - 1 pair,
• Scraper for gas nozzles,
• Exploitation parts of MIG/MAG handle (nozzles, connectors, tips, insulators),
• Angles magnetic 11kg - 2 pcs. ,
• Electrodes SkandiKraft 1kg - 1pack.

THE SET INCLUDES:

• Welding machine SHERMAN MIG 200 HD,
• Welding torch MIG/MAG type MB 15 - 3m,
• mass handle - 2m,
• electrode holder - 2m,
• Refill for steel wire - 1pcs,
• Roll for feeder - 1pcs,
• Tip current - 2pcs.
• User manual in Polish.

ADDITIONAL ACCESSORIES:

• Bottle with gas mixture Argon/CO2,
• Reducer cylinder Ar/CO2 MINI with two pressure gauges,
• Welding wire SG2 0,8mm - 5kg,
• Preparation anti-chipping ALLWELD,
• Angle magnetic 11kg - 2 pcs.,
• Electrodes SkandiKraft - 1kg,
• Flame-retardant gloves for welding,
• Hose for connecting gas with clamps - 2m,
• Scraper for gas nozzles.

+ HANDLE CONSUMABLE PARTS:

• Gas nozzle - 2 pcs.
• Current connector - 2 pcs.
• End current - 10 pcs.
• Gas distributor - 2 pcs.

Specifications