Suvirinimo aparatas SHERMAN DIGIMIG 360 GDS, 3in1, MIG/MMA/TIG, 400V, 360A

Trumpai apie prekę

Prekė: Suvirinimo aparatas SHERMAN DIGIMIG 360 GDS, 3in1, MIG/MMA/TIG, 400V, 360A. Kategorija: Pusiau automatiniai suvirinimo aparatai.

• Gamintojas: Sherman
• Modelis: Spawarka inwertorowa DIGIMIG 360GDS

Manufacturer: SHERMAN ║ Welding methods: MIG/MAG, MMA, TIG LIFT ║ Power supply: 400 V ║ Welding current: 360 A ║ Efficiency: 60%

• full free post-purchase support
• You can call us at any time and we will help you set the parameters and operate the device

DISCOVER ALL THE ADVANTAGES OF A WELDING MACHINE

SHERMAN DIGIMIG 360 GDS:

• Power 360A in the work cycle 60%
• 3in1 welder: MIG/MAG, MMA, TIG DC
• SYNERGY with correction option and MANUAL setting !
• Welding point - SPOT
• Synergy to: black steel, stainless steel, aluminium, flux.
• Adjustable inductance - lutowelding CUSi3
• Clear and easy-to-use soft control panel
• Regulation of pre gas and post gas
• 36 V socket for gas heater
• Burn Back - protection against wire melting
• ARC FORCE function
• Hot Start Mode
• VRD - voltage reduction system
• 5 kg and 15 kg spool support
• Settings memory
• 4-roll feeder
• Operating mode 2T/4T
• Efficient fan
• 36 V socket for gas heater
• Place for a gas cylinder with a capacity of up to 50 l !
• Welding FLUX - without gas
• Option to connect the SPOOL GUN
• Chassis equipped with front steering wheels
• On the cover from the inside shortened guide facilitating work

SEMI-AUTOMATIC WITH SYNERGY AND THREE WELDING METHODS

Sherman DIGIMIG 360 GDS is a welding machine that gives us the possibility of welding in the MIG/MAG, MMA, TIG DC method and FLUX self-shielding wire. A great advantage of the Sherman DIGIMIG 360 GDS welding machine is the possibility of using synergy, which will be useful when welding steel black, stainless, acid-resistant, self-shielded wire and aluminium. Synergy also has the option of correction of parameters. In addition to synergistic settings, we also have the possibility of manual setting of equipment according to our expectations.

EQUIPMENT DESIGNED FOR HEAVY-DUTY TASKS

In addition to many functions, the welder gives us great power. The equipment operates at a maximum current of up to 360 A and is equipped with a handle MB36, which perfectly meets its purpose during operation, where we use the maximum load of the equipment. The semi-automatic machine is designed for production and industrial tasks.

SPOOL GUN AND CHASSIS

The Sherman inverter semi-automatic welding machine has a strong and robust chassis, which is equipped with front swivel wheels and space for cylinders. The platform allows us to mount the cylinder up to 50 liters of capacity. Another advantage of the device is the option of connecting the handle SPOOL GUN - a handle with a built-in wire feeder.

Solid workmanship

The power source is based on IGBT transistors that provide a minimum of electromagnetic interference, allowing you to increase the efficiency and reliability of the device.

The compact and compact design makes the device applicable in workshop and repair work, both in halls and in the field. Carrying makes it easy to equip the welding machine with a rigid transport handle.

SYNERGISTIC PROGRAMS OF THE SEMI-AUTOMATIC SHERMAN 360 GDS

• STEEL: Welding carbon steel. You can choose between CO2 shield or Ar/CO2 82/18 (MIX2) mixture.
• STANLESS: Welding of stainless steels in Ar/CO2 mixture sheath. (MIX1).
• AlMg5: - Welding of magnesium aluminum alloys in argon sheath.
• AlSi5: Welding of silicon alloys aluminium in argon sheath.
• CORED: Welding with powder self-shielding wire (WITHOUT GAS).

In synergistic mode, the welding current is regulated. The welding voltage is selected by a synergistic program. After pressing the (B) button, it is possible to correct the welding voltage.

ADDITIONAL FUNCTIONS

PRE GAS/POST GAS - provides full gas protection of the weld during the entire welding cycle - in the welding machine we can set both gas before and immediately after welding.

BURNBACK precise regulation of the welding wire end burning time eliminates the risk of welding wire sticking to the current tip

HOT START function "hot start" - consists in temporarily increasing the welding current above the set value at the moment of arcing. This prevents the phenomenon of “sticking the electrode” in the initial phase of welding, making it easier to start the whole process.

ARC FORCE “arch dynamics” – shortening the arc length is accompanied by an increase in welding current, which stabilizes the arc, regardless of its length.

4x4 FEEDER - the welding machine is equipped with a professional 4x4 feeder with all driven and guided rollers (upper and lower rollers may have grooves). Such a feeder guarantees work without wire jams, even with a 5 m handle!

2T/4T - at two bars after pressing the start button, the welding process takes place after releasing the button, the welding process is stopped - at four bars after the first press and release of the button, the welding process stops at the second press. This is a more convenient solution for longer welds.

SPOT - spot welding by MIG/MAG method. The function is mainly used to connect sheet metal "on tab" or pre-connect the structure.

LUTOSPELING - the welding machine has an adjustable inductance, thanks to which the lutowelding process is possible. The function allows free joining of car sheets, requiring obtaining a protective zinc coating.

POWER SUPPLY PARAMETERS

• Power supply: AC 400 V
• Frequency: 50 Hz
• Number of phases: 3 ph

TECHNICAL PARAMETERS MIG/MAG

• MIG/MAG welding current: 40 - 360 A
• Efficiency: 60%
• Idle voltage: 70 V
• Type of feeder: 4R
• - Subwoofer Spool size: 15 kg
• Spool diameters with wire: 200 mm, 300 mm
• Wire feed speed: 1,5-24m/min
• Pre-gas: 0-5 sec
• Post gas: 0-5 s
• Spot welding time: 0-5 s
• Wire diameter: 0.8/0.9/1.0/1.2/1.6 mm

TECHNICAL PARAMETERS MMA

• MMA welding current: 20 - 360 A
• Efficiency: 60%
• Diameter of wrapped electrodes: 2.5-6.0 mm
• ARC FORCE regulation: 0-10
• HOT START regulation: 0-10

TECHNICAL PARAMETERS TIG

• TIG welding current: 10 - 360 A
• Wire diameter: 1.0-2.4 mm
• Tungsten electrode diameter: 1.0-3.2 mm
• Gas flow: 4-12l/min

PHYSICAL PARAMETERS

• Housing protection class: IP21
• Dimensions (with chassis): 928 x 427 x 712 mm
• Weight: 80 kg

• Welding machine SHERMAN DIGIMIG 360 GDS
• Welding torch MIG type MB 36 - 4 m
• Bulk Holder
• Wire roller - 2 pcs
• User manual in Polish

Specifications