Suvirinimo aparatas SHERMAN DIGIMIG 215 DUALPULSE SYNERGY 4T

Trumpai apie prekę

Prekė: Suvirinimo aparatas SHERMAN DIGIMIG 215 DUALPULSE SYNERGY 4T. Kategorija: Pusiau automatiniai suvirinimo aparatai.

• Gamintojas: Sherman
• Modelis: MIGOMAT SHERMAN DIGI MIG 215 PULS SYN
• Ilgis: 375 mm
• Plotis: 490 mm
• Aukštis: 220 mm

➖➖➖➖➖➖➖➖➖➖➖➖➖➖

SHERMAN DIGIMIG 215 DUAL PULSE

is an inverter semi-automatic welding machine designed for arc welding by the method

• MIG SYN - MIG-MAG welding using synergistic programs.
• MIG MAN - MIG-MAG welding with manual settings.
• MMA - Welding with wrapped electrodes
• MIG /MAG PULS- Single pulse welding MIG/MAG
• MIG/MAG 2-PULS - Double pulse welding MIG/MAG
• FLUX / FCAW - Self-shielded wire welding.
• TIG PULSE – Tungsten electrode welding in argon shield using current pulsation
• TIG LIFT - Welding with a special handle with a valve, arcing is then carried out by lightly rubbing the non-melting electrode against the welded material.

SHERMAN DIGIMIG 215 DUAL PULSE is used for welding:

✔ low alloy steel

✔ low carbon steel

✔ alloy steel

✔ aluminium and its alloys

The device has been designed for all kinds of welding work in automotive, locksmith, repair, industrial, factories, etc.

➖➖➖➖➖➖➖➖➖➖➖➖➖➖

⭐ SYNERGY - is a very helpful feature available in professional welding equipment class PREMIUM. By setting the appropriate program or entering parameters, the device will independently select most welding settings, such as wire feed speed or appropriate voltage, according to the programmed data.

• Fe CO2 - program for welding black steel in CO2 gas shield
• Fe Ar+CO2 - program for welding black steel in gas shield MIX (Ar+CO2)
• AlMg5 AlSi5 - argon shielded aluminium welding program AR
• 308-316- MIG welding of stainless steels, in argon sheath with 2% CO2 admixture, or in pure argon.

• Fe Ar+CO2 - program for welding black steel in a shield
• AlMg5 AlSi5 - argon shielded aluminium welding program AR
• 308-316- MIG welding of stainless steels, in argon sheath with 2% CO2 admixture, or in pure argon.

➖➖➖➖➖➖➖➖➖➖➖➖➖➖

The easy-to-read LED display allows precise adjustment of the device, even in very strong lighting.

On the panel is m.in.:

• Button MENU
• Multifunction knob V -The knob is used, among others, to adjust the welding voltage
• Multifunction knob A -The knob is used, among others, to adjust the welding current

⭐ SPOT WELDING SPOT - with the possibility of setting the welding time at the point. A function that allows you to perform even, spot welds or spot welding of thin plates with other elements. This method is used, for example. in the production of chassis and car bodies, but also in the home workshop.

⭐ PULS - Welding with pulsating current, in which high and low current are alternately used. This reduces overall heat supply and splatter while providing greater resistance to non-melting. This method can be used to weld both metals with high thermal conductivity and thinner metals without burning them. Additionally, you can get narrower and more penetrating welds on thicker metals.

⭐DUAL PULSE - provides better transfer of the binder into the welded material, which fundamentally improves control over the welding process and the quality of the weld itself. It allows you to work in all positions and is especially useful for forced positions. It provides less heat impact, works well in the case of thinner materials or those with increased thermal conductivity, such as: aluminium alloys. Reduces the amount of chipping. The most advanced welding method, in which current pulses occur in two ranges, thanks to which we obtain the optimal aesthetics of the weld face, the so-called. husk effect.

⭐ WELDING TIG WITH PULSE - consists in temporary impacts of a larger current, during which a drop of metal from the electrode wire is broken and moved to the weld. The current has once descending characteristics, once increasing, with a constant set frequency.

⭐LUTOSPELING - is a method that is quite similar to MIG/MAG welding, but the energy supplied in this case is much less. This means that soldering is used to join thin sheets covered with a layer of zinc. The described method is a bonding process during which solder melts, not the material with which we work.

⭐SETTINGS MEMORY - The device has memory of the last settings, i.e. When disabled and re-enabled, the last set parameters are restored.

⭐ SPOOL GUN CONNECTOR - allows you to connect a special handle with space for an additional spool with wire. .

⭐POST GAS - regulation of gas outflow time after welding arc extinction. This is a helpful feature to cover the welding lake. Lack of additional gas shield may result in oxidation of the weld

⭐ PRE GAS - gas outflow before arcing. Protects the lake from the harmful effects of atmospheric air. Regulation expressed in seconds.

⭐ TWO-BAR 2T - pressing the button initiates gas outflow and welding current, releasing the button turns off welding current and gas outflow

⭐ FOUR-BAR 4T - pressing and releasing the handle button initiates gas outflow and welding current, re-pressing and releasing the button turns off the welding current and gas outflow.

⭐ S2T - Special double bar with hot start and final current filling the crater

⭐ S4T - Special four-bar with hot start and final current

⭐PROFESSIONAL WIRE FEEDER - enables precise extension of the welding wire excluding its slippage, guarantees stability and continuity of operation of the device.

⭐ CONTROL PANEL - The welding machine is equipped with an easy-to-use control panel and LED display, so it can be used even by amateurs.

⭐ EUROCONNECTOR - allows you to quickly change the handle and allows you to change the polarity for welding with self-shielding wire.

IN ADDITION, THE DEVICE HAS THE FOLLOWING FUNCTIONS TO SUPPORT WELDING:

✅ WIRE BURNING FUNCTION - BURN BACK - It is possible to regulate the time, through which the voltage at the output of the device still occurs after stopping the wire feeding. This function prevents the welding wire from getting stuck in the workpiece and prepares the end of the wire for the next arc strike. Higher function values cause the wire to burn closer to the current tip.

✅ HOT START: facilitates the ignition of the electrode by providing more welding current with each arc.

✅ VRD - is a voltage reduction system whose task is to turn off the power supply within a few milliseconds after finishing welding. This function is also responsible for reducing the voltage on the wrapped electrode to a safe level.

➖➖➖➖➖➖➖➖➖➖➖➖➖➖

⭐WORK IN INDUSTRY - thanks to its high quality and multifunctionality, the device can be used in professional and industrial work.

⭐ INVERTER TECHNOLOGY IGBT - is a modern technology based on bipolar transistors with an isolated gate. It combines the ease of control of field transistors with high breakdown voltage and switching speed of bipolar transistors. The use of IGBT technology has the effect of significantly extending the reliable operation of welding equipment.

➡ The device is equipped with overload protection, which increases its reliability.

❄ The device has a fan cooling system which significantly increases its efficiency.

➖➖➖➖➖➖➖➖➖➖➖➖➖➖

✔ REPAIR WORKSHOP

✔ LOCKSMITH WORKSHOP

✔ FACTORIES

✔ SHIPYARD

✔ FARMS

✔ HOMEWORK

AND WHEREVER RELIABILITY MATTERS!

EFFICIENT OPERATION THANKS TO PROFESSIONAL WIRE FEEDER

The welder is equipped with a professional wire feeder, which guarantees stability and continuity of operation of the device.

The 2-roll feeder allows precise extension of the welding wire excluding its slippage.

Pressing the MULTIFUNCTIONAL V knob will start the wire feeder

The device has a Spool Gun handle switch

The feeder has a quick wire change knob as well as a wire feed roller.

HANDLE WITH EURO CONNECTOR

The welder has a EURO socket for MIG welding wire. The socket allows you to quickly change the handle to the same standard and, most importantly, allows you to change the polarity for welding with FLUX self-shielding wire.

➖➖➖➖➖➖➖➖➖➖➖➖➖➖

Inductance adjustment allows optimization of arc characteristics depending on the thickness of the welded element and the welding method and conditions.

The function is useful during MIG/MAG welding of thin elements, preventing them from burning out and soldering galvanized elements.

The thinner the MIG/MAG welded element, the higher the inductance (soft arc - less melting), for thick elements vice versa (hard arch - greater melting).

The standard neutral inductance setting is in the middle of the scale.

Changing the inductance value also reduces the amount of welding chips during CO2 shielded welding.

The optimal setting of the inductance value depends on several factors and may differ from the standard recommendations, it should be selected during welding tests by manipulating the potentiometer knob.

THANKS TO THE INDUCTANCE ADJUSTMENT, THE WELDING MACHINE IS SUITABLE FOR SOLDERING

☀ VERSATILITY OF THE DEVICE ☀

Migomat company SHERMAN is a device with a wide range of applications, designed as an inverter power source enabling welding with hot melt wire in a gas shield MIG/MAG or FCAW self-shielding wire (after changing polarity), welding with a buffer electrode MMA, as well as the TIG Lift method.

✔ MIG/MAG welding

Arc welding in gas shields is one of the most commonly used processes for the manufacture of welded structures. The semi-automatic welding process involves melting the edges of the welded object and the material of the hot melt electrode with the heat of an electric arc glowing between the electrode in the form of a solid wire and the welded detail, in an inert or active gas shield.

✔ Welding MMA

In the MMA method, a wrapped electrode is used, consisting of a metal core covered with a sheath. An electric arc is produced between the end of the electrode and the welded material. Arching is created by touching the end of the electrode to the welded material.

✔ Welding TIG DC

In the TIG (Tungsten Inert Gas) method, the electric arc is ignitioned in an inert gas (argon) shield between the welded element and the non-melting electrode, made of pure tungsten or tungsten with additives. In TIG DC Lift mode, the arc glow occurs when the electrode comes into contact with the welded element. In TIG DC mode, the current is constant.

❗❗ TIG method can be welded after connecting an additional handle, available at our auctions ❗❗

✔ Self-shielding wire welding FCAW

Thanks to the polarity change function, it is possible to weld without shielding gas, with FCAW self-shielding wire. The wire is designed for general production work, also in field conditions, and for welding structures that are not subject to impact requirements. Welding current DC(-).

Self-shielding powder wire fi 0,8mm/1kg E71T-GS is designed for welding ordinary carbon steels and increased strength not exceeding 510 MPa.

It is used in prefabrication, construction, tank production, agricultural equipment, etc. Used in both production and repair of equipment.

SELF-SHIELDED WIRE IS AVAILABLE SEPARATELY AT OUR AUCTIONS AND IN OTHER SETS

➖➖➖➖➖➖➖➖➖➖➖➖➖➖

TO MEET CUSTOMERS, BASED ON OUR MANY YEARS OF EXPERIENCE, WE HAVE CREATED PROFESSIONAL SETS FOR YOU, THANKS TO WHICH WE PROVIDE YOU WITH EQUIPMENT READY FOR USE IMMEDIATELY AFTER CONNECTING TO ELECTRICITY.

⌚ SAVE YOUR TIME ⌚

BUY INCLUDED AND WE'LL TAKE CARE OF THE REST!

JOIN THE BEST - START YOUR WELDING ADVENTURE WITH US!

➖➖➖➖➖➖➖➖➖➖➖➖➖➖

TECHNICAL DATA:

• Power supply voltage: ~1 × 230V 50Hz
• Maximum power consumption: 7,7 kVA
• Maximum current consumption : 40.6 A
• Voltage in unloaded condition : 64V

MIG PARAMETERS:

• Welding current MIG [A]: 50 – 200
• Max welding current [A]: 200
• Welding voltage : 16,5 – 24,0 V
• Type of feeder: built-in, 2 - roller
• Wire spool: ≤ 100mm, 200mm
• Commuting speed of feeder - 1-15
• Spot welding time [s] - 0,1-9,9
• Pulse frequency [Hz] - 0,5 – 5
• Pulse width [%] - 20-80
• Pulse amplitude [%] - 5-50
• Inductance regulation: YES
• 2T/4T switch: YES
• Synergy: YES
• MIG duty cycle: [%] 60

TIG PARAMETERS:

• TIG welding current [A]: 5 – 200
• Max welding current [A]: 200
• Pulse frequency [Hz] - 0,1-99
• Pulse width [%] - 5-95
• Pulse amplitude [%] - 1-500
• Welding TIG: DC Lift
• Working cycle [%]: 60

PARAMETERS MMA:

• MMA welding current [A]: 5 – 200
• Max welding current [A]: 200
• Working cycle [%]: 60

OTHER:

• Weight: 15 kg
• Dimensions [cm]: 49 x 22 x 37,5
• Network security [A] - 25
• Welding voltage correction -50 – +50 %
• Gas flow - 1 – 10 s
• Gas flow - 0,1 – 50 s
• HOT START (MMA) - 20 – 180 %

WHEN YOU BUY FROM US, YOU WILL RECEIVE:

• WELDING MACHINE SHERMAN DIGIMIG 215 DUALPULSE
• WELDING TORCH MIG/MAG 24KD - 3 m
• ELECTRODE HOLDER MMA - 2m
• MASS HOLDER - 2m
• ROLLS FEEDER FOR STEEL 0,8-1,0mm and ALUMINIUM 1,0-1,2mm
• STEEL CARTRIDGE
• INSTRUCTION FOR in Polish
• WARRANTY CARD

SET OF 1

Specifications