Suvirinimo aparatas MULTIPRO 200 MMA MIG TIG AC/DC HF

Trumpai apie prekę

Prekė: Suvirinimo aparatas MULTIPRO 200 MMA MIG TIG AC/DC HF. Kategorija: Pusiau automatiniai suvirinimo aparatai.

• Gamintojas: Spartus
• Modelis: MULTIPRO2004IN1-PAK-15-3-17-4_p6

SPARTUS MULTIPRO 200 4IN1 - WELDING KIT #1

Brand: SPARTUS| Welding methods: MIG,MMA,TIG ACDC, TIG LIFT DC| Power supply: AC 230V/50Hz | Welding current: 200A | Efficiency: 40%

STANDARD EQUIPMENT

• SPARTUS® Welding machine MultiPro 200 4in1
• Handle SPARTUS® MIG SPP 150 3m
• Handle SPARTUS® ProTIG mini 17 1B 4m
• TIG tool with torch parts
• Electrode holder 3m
• Mass cable 3m
• Gas hose with bands
• User manual

OPTIONAL EQUIPMENT

• Vogelmann Gas bottle MIX Ar/CO2 8l 150bar
• Vogelmann Gas reducer Exakt
• Vogelmann Spray anti-chipping 400ml
• Vogelmann Welding wire SG2 0,8mm 5kg
• Vogelmann Set 20 el. MB-15
• Art Mas Welding gloves

SPARTUS MultiPro 200 4in1

High-end, modern inverter welding machine, constructed on the basis of advanced PWM technology and professional IGBT transistors. It allows welding MIG / TIG AC / TIG DC and MMA, current up to 200A. It is powered from a single-phase 230V network. The device gives a wide range of possibilities for the above-mentioned methods of joining metals.

MultiPro 200 4in1 is equipped with a synergistic system for welding MIG/MAG with the possibility of choosing the following programs: for welding steel, stainless steel, aluminum; self-shielding wire welding and soldering.

It is possible to introduce manual correction of parameters, during which the machine tells the user the thickness of the material and the speed of wire feeding. The device also works in manual mode.

Thanks to the applied solutions, MultiPro 200 4in1 also enables advanced welding using the TIG AC and TIG DC methods with the possibility of choosing the method of arc HF or Lift.

In addition, the device is equipped with the function of welding with pulsing current, making the machine perfect for welding very thin sheets and aluminium. The device also has a full MMA AC and MMA DC welding.

Modern design, the LCD function panel combined with technologically advanced components puts the device at the forefront of the best machines in this class on the market.

The professional device of the SPARTUS® Pro line is perfect for the manufacturing sector and industry.

TECHNICAL DATA:

• Power supply voltage: ~1× 230V ± 10% 50 / 60 Hz
• MIG welding current: 30 - 200A
• MIG duty cycle: 40%
• Type of feeder: built-in, 2 - roller
• Wire spool: ≤ 5kg / ∅200mm
• Wire diameter: 0.6 / 0.8 / 1.0mm
• TIG welding current: 10 - 200A
• TIG duty cycle: 40%
• Pre-gas: 0.1 - 2s
• Post-gas: 0 - 10s
• Power build-up time: 0 - 10s
• Power drop time: 0 - 10s
• TIG Pulse: yes
• Pulse current: 10 - 200A
• Pulse width: 5 - 95%
• Pulse frequency: 0.5 - 999Hz
• AC current frequency: 50 - 250Hz
• AC waveform: rectangular, sinusoidal, triangular
• AC Balance: 10 - 99%
• MMA welding current: 10 - 200A
• Arc Force: yes
• Hot Start: yes
• Power consumption: MIG 28.1 / TIG AC 22.2 / TIG DC 22.1 / MMA AC 27.7 / MMA DC 30.5
• Power factor (cosφ): 0.99
• Efficiency η: 99%
• Isolation class: F
• Degree of protection: IP21S
• Weight: 21
• Dimensions: 606 x 217 x 404m

IGBT TECHNOLOGY

Modern technology based on bipolar transistors with an isolated gate. It combines the ease of control of field transistors with high breakdown voltage and the speed of switching bipolar transistors. The use of IGBT technology has an impact on significantly extending the reliable operation of welding equipment.

DEGREE OF PROTECTION

IP determines the degree to which the device is resistant to the ingress of solid and water contaminants. IP21 means that the device is adapted to work in closed rooms.

PROTECTION AGAINST OVERHEATING

The IGBT module is protected from overheating by a protective installation that turns off the welding circuit of the device. After a few minutes, the welding machine is cooled to a temperature allowing it to be switched on again.

WORK CYCLE

The work cycle is based on a 10-minute period. The 40% duty cycle means that a 6-minute break is required after 4 minutes of operation. The 100% duty cycle means that the device can work continuously, without interruptions.

MMA

A method in which a wrapped electrode is used, consisting of a metal core covered with a sheath. The device allows welding with all types of electrodes, e.g. alkaline, cellulose, rutile or acidic.

ARC FORCE

Increasing or decreasing the length of the welding arc depending on the distance of the electrode from the material being welded. Allows you to adjust the dynamics of the welding arc. Shortening the arc length is accompanied by an increase in welding current, which results in stabilisation of the arc.

HOT START

The function is designed to prevent sticking the electrode to the material and is a great convenience when arcing. It works at the moment of arcing, causing a temporary increase in the welding current above the value set by the welder.

POLARITY CHANGE - WELDING WITHOUT GAS

Thanks to the variable polarity, it is possible to weld using the FLUX method with powder wire without shielding gas. The wire is filled with flux producing protective gases during welding.

TIG LIFT WELDING

For welding with this method, it is necessary to use an additional TIG handle. A gas-cooled handle with current load capacity suitable for the device is required, equipped with a shield gas control valve.

TIG LIFT handle is an additional option, which can be purchased at our other auctions.

SYNERGY

MIG/MAG welding using synergistic settings. The device selects welding parameters depending on the selected type and thickness of the material. These parameters can be changed by the user to adjust the settings to suit their needs.

REGULATION OF INDUCTANCE

It allows you to optimize arch characteristics depending on the thickness of the welded element and the welding method and conditions. The function is useful during MIG/MAG welding of thin elements, preventing them from burning out and soldering galvanized elements.

2T/4T

2T - Pressing the welding torch button will cause the gas to pre-flow, then ignite the arc and start welding. When the button is released, the arc will be extinguished and the gas will flow out.

4T - Pressing and releasing the welding torch button will cause the gas to pre-flow, then the arc to glow and start welding. After pressing and releasing the button again, the arc will be extinguished and the gas will flow out.

2 ROLLER WIRE FEEDER

Professional feeder made of die-cast aluminum, has a strong motor, which allows for stable feeding of wire be

BURN BACK

Precise regulation of the burning time of the end of the welding wire eliminates the risk of welding wire sticking to the current tip.

SLOW FEED

This is a function of so-called. soft start of the wire feeder, recommended especially when welding with large currents at high wire feed speeds.

EASY-TO-USE, EASY-TO-READ CONTROL PANEL:

Easy to use control panel allows precise and smooth adjustment of parameters. Digital display indicates the actual current during welding. The semi-automatic welding machine has a menu that facilitates operation and allows you to choose the type of welded material.

PRE GAS

Regulation of shielding gas outflow time before welding.

POST GAS

Regulation of shielding gas outflow time after welding.

TIG AC/DC

Welding by TIG alternating current. This is required for welding aluminum and its alloys.

TIG PULSE

The function affects the shape of the weldsy and focus of the arc. Pulse welding also reduces the amount of heat supplied to the material and is applicable when welding thin materials.

HF - NON-CONTACT ARC IGNITION

The device is equipped with a ionizer enabling contactless arcing.

RISING CURRENT

The time of current build-up of welding from the initial current to the set value of the welding current.

CURRENT DROP

Welding current drop time from set to zero or crater current value.

PULSE FREQUENCY

The frequency with which the pulse value of the current between the welding current and the base current changes.

FREQUENCY OF CURRENT AC

Function useful for welding aluminum. The higher the frequency, the better the quality of the weld and the better the focus of the arc

AC CURRENT BALANCE

The ratio of the duration of the positive phase of the current to the negative phase. Reduction of balance causes more heat to be introduced into the material, resulting in a narrower weld and deeper melting, while reducing the thermal load on the tungsten electrode.

Increasing the balance causes less heat to be introduced into the material, resulting in better cleaning, a wide weld and shallower melting, but significantly burdens the tungsten electrode.

SELECTION OF THE AC CURRENT WAVEFORM

• Sine wave - Classic wave, similar to transformer welding machines, preferred by older welders.
• Rectangular wave - Universal, the most commonly used waveform for welding any material. It generates more heat in the welding zone, more melting than other shapes.
• Triangular wave - Preferred especially for welding thin materials.

PULSE WIDTH

The duration of the pulse, allows you to adjust the depth of melting. The increase in width increases the depth of melting, reducing the amount of heat introduced into the material, reducing the risk of burning thinner sheets or smaller elements.

BASE CURRENT

The current responsible for maintaining the welding process, the lower value of the current pulse. It makes it easier to control the amount of heat introduced into the material. Adjustment of the base current is possible only when welding with a pulse.

TIG IMPULSE

Pulse welding is a variant of TIG spot welding that allows the bonding of thin elements, thanks to very low heat emission in the joining zone. It consists of cyclic short-term arcing and extinction.

SPOT

TIG spot welding consisting in bonding thin elements, thanks to very low heat emission in the joining zone. It consists in cyclic short-term ignition and extinction of the arch.

INSULATION CLASS F

Type of insulation materials used, informing about the maximum operating temperature of the transformer. Its exceeding at continuous operation reduces the service life and time of trouble-free operation of the transformer. For class F 155°C.

STRONG AND ROBUST CONSTRUCTION

The housing of the device is made of light and durable composites, resistant to all kinds of mechanical damage.

EASY TRANSPORT

Equipping the welding machine with two transport handles ensures convenience when changing workplaces.

COOLING

The device has a cooling system fan which definitely increases its efficiency

VOGELMANN GAS CYLINDER MIX AR/CO2 8L 150BAR

The cylinder filled with a mixture of Argon gases (82%) and Carbon dioxide (18%) is designed for welding in protective gas shielding and for other industrial applications.

• Valve: W 21.8 x 1/14 DIN 477
• Contents: Argon 82%, Carbon Dioxide 18%
• Capacity: 8l
• Working pressure: 150 bar
• Amount of gas: ~1,8m3

VOGELMANN EXAKT - CYLINDER REDUCER ARGON/CO2

The universal gas reducer brand VOGELMANN allows to reduce the pressure of gases taken from the cylinder to the required working pressure.

It allows you to automatically receive pressure at a possible constant level regardless of changes in inlet pressure.

• Brand: Vogelmann
• Gas type: CO2, Ar, MIX
• Thread at the inlet: W21,8x1/14
• Thread of nut at outlet: G 1/8
• Outlet connector: ø5mm
• Inlet pressure: 200bar
• Exhaust pressure: 0,5 - 10 bar
• Capacity: 20l/min

VOGELMANN ANTI-CHIPPING SPRAY 400ml

DESTINY

Use to protect the nozzle of the burner, tools and the surface of the welded material from melting metal chips during welding with electrical techniques.

USE

Before welding, lightly spray from a distance of 30 cm protected surface. After welding, remove the chips with a cloth.

• Features: flammable, contains PB
• Content [ml]: 400

VOGELMANN WELDING WIRE SG2 5KG 0,8MM

SG2 copper welding wire designed for welding low-carbon and low-alloy steels in carbon dioxide (CO²) or a mixture of argon and dioxide gases (Ar + CO²).

• Wire diameter: 0,8 mm
• Roller weight: 5 kg
• Quality standard: SG2/ER70S-6
• Roller type: D200
• Total spool diameter: 200 mm
• Tensile strength: 540 MPa

VOGELMANN SET OF ACCESSORIES FOR WELDING TORCH MIG MB15 - 20 ELEMENTS

EQUIPMENT OF THE SET:

• Gas nozzle MB-15 - 4 pcs.
• Current terminal M6x25mm 0,8mm - 10 pcs.
• Current switch with spring - 2 pcs.
• Plastic insulator - 2 pcs.
• Spring - 2 pcs

Five-finger gloves made of very good quality cowhide leather in natural color, tanned in a high-quality technological process, giving the skin the right softness and durability.

Output power: < 20 mW

• Seams secured - around the tips of the fingers, at the base of the middle fingers and in the side seams are bizy reducing abrasion,
• Anatomical arrangement of the thumb,
• Cuff finished with piping,
• Length 35 cm.
• Size 10

Specifications