Suvirinimo aparatas MP0106, IGBT, MIG/MAG/FLUX/MMA

Trumpai apie prekę

Prekė: Suvirinimo aparatas MP0106, IGBT, MIG/MAG/FLUX/MMA. Kategorija: Pusiau automatiniai suvirinimo aparatai.

• Gamintojas: Majster Polska
• Modelis: MP0106
• Ilgis: 410 mm
• Plotis: 290 mm
• Aukštis: 260 mm

✅ MAJSTER to Poland a company constantly ensuring that the products are:

⭐Quality No1, Refined, Failure-free, at work Convenient, in price-quality Unbeatable

✅ Service ✅ parts - all available immediately in Poland 24h

✅Here is the most popular MIG inverter and MP-0106 model on the market.

Every even the simplest INVERTER is incomparably BETTER than even the most expensive outdated transformer

Here we are dealing with a proven device, improved for years, we invite you to read customer reviews about the product

❤️‍Incredibly attractive prices on the market, very tempting, but does the cheapest offer come with sufficient quality to get the job done?

Is Cheapness Quality? Where is the difference?

-

❤️‍When buying goods at the lowest prices on the market, remember that a small difference in price translates into a large difference in quality and service ⭐⭐⭐⭐⭐

-

✅ A well-thought-out, improved, and increasingly popular design for years, this isn't a disposable product.

We create budget-friendly BUT! - completely trouble-free, good quality equipment that works well, and is reliable in operation!

✅ + SELF-SHIELDING WIRE 0,8 MM 0,45 KG - 2 pieces

Self-shielding welding wire for welding steel elements without the use of shielding gas.

The use of wire allows welding without the need for additional shielding gas.

✅ Ready set for welding WITHOUT GAS!

✅ SPECIFICATION:

• Model: MP-0106 Pro
• Power greater than most migrations on allegro 250A
• Continuous current MIG: 40-150A
• Supply voltage: 230V
• Frequency: 50Hz
• Rated Input Capacity: 3,7KVA
• Welding methods: FLUX - semi-automatic welding with self-shielding wire "without gas"
• Electrode range: 1,6-4 mm
• Wire diameter: 0.6 - 0,8 mm
• Wire spool weight: max 1kg
• Rated welding cycle: 60%
• Working cycle: 25%
• Efficiency: 85%
• Degree of protection: IP21S
• Degree of protection: H
• Weight: 5,6kg

⏩ How to properly connect the wires ❓

.

❇️ ➖ When welding using the MMA method, connect the ground cable to the ➖ (minus) connector ❇️

✴️ ➕ To weld with self-shielding wire in the FLUX method, connect the ground cable to the ➕ (plus) connector ✴️

TIG Lift handle is not included in the offer (to be purchased separately)

⏩ The device from the MAJSTER PRO series is a semi-automatic welding machine designed for welding steel in gas shielding and self-shielding wire FCAW (FLUX), MIG/MAG, MMA, as well as TIG Lift method (this requires the purchase of an additional TIG Lift welding handle)

⭐ It is intended for all kinds of welding work, in locksmith workshops, repair workshops, bodywork, farm, etc.

✅ The power source was built on IGBT LATEST GENERATION transistors ensuring minimum electromagnetic interference, small power losses in basic systems, enabling increase in efficiency and reliability of the power source, lower consumption

⏩ The welding machine works with 1 kg wire and 0,6-0,8mm diameter

The FCAW method is arc welding with core (powder) wire.

⭐ This is a welding method similar to the MIG/MAG method, except that the wire inside is filled with flux or a chemical that produces protective gases during welding.

⏩ FCAW welding combines the advantages of both wrapped electrode welding and MAG welding: very high efficiency (no need to change the electrode frequently) can also be welded outdoors (the flux also protects against weld oxidation) the welder does not have to have very high qualifications.

✅ COMPOSITION OF THE SET:

• MP-0106 welder
• Hand mask
• Brush with hammer
• Bulk cable
• Electrode cable
• Integrated MIG handle
• Self-shielding wire 0.8mm 0.45kg - 2 pieces
• User manual in Polish,
• Original packaging

Popularly called hot start, it allows by temporarily increasing the welding current above the value set by the welder. HOT START works at the moment of arcing and is designed to prevent the electrode from sticking to the material. It is a great convenience when lighting the electrode.

cuts/minimizes welding voltage and current in case of short circuit of the electrode with the welded material. ANTI STICK allows the welder to detach the electrode more easily.

stabilizes the arch regardless of its length. Regulates the dynamics of the welding arc. By reducing the value of the function, it gives a soft arc and a smaller depth of melt, while increasing the value of the function causes deeper melting and the possibility of welding with a short arc. At the highest value for the ARC FORCE function, it is possible to "press the electrode into a lake of molten metal and burn the material through.

✅ Proven in sport, Reliable in your hands - Majster Pro

Specifications