Suvirinimo aparatas MIG Co2 FLUX MMA TIG INVERTER SYNERGY Majster MP0141

Trumpai apie prekę

Prekė: Suvirinimo aparatas MIG Co2 FLUX MMA TIG INVERTER SYNERGY Majster MP0141. Kategorija: Inverteriniai suvirinimo aparatai.

• Gamintojas: Majster Pro
• Modelis: MP0141 MAJSTER PRO

⭐Synergy - by adding ingredients we get more than they are combined

⚫Compact 5in1 device + high power, offers all possible welding methods

Our welding machine has true parameters+ support Synergistic settings

not as in budget semi-automatics , fixed mount, perpetually tangled wires, problem when replacing the mig mount

you can weld any method, plus or minus on the welding torch, this is not what cheap welding machines

made of thick pressed sheet metal, opened on massive COMPOSITE hinges, feel the quality

included roll supporting 2 wire thickness 0,8 -1,0mm with notching, works without slipping

very intuitive , quick and easy to use panel - controlled by 1 button and 2 knobs

Indicates AMPERER, Thickness of welded material and welding method

Function for easy setting , Ampere - Intensity - wire thickness - thickness of welded material - amount of gas

The picture shows a Euro connector (so-called EURO socket), used in MIG/MAG welding machines.

In cheaper welding machines, the MIG handle is sometimes mounted “permanently”, while EURO socket welding machines are much more practical and professional.

not as in budget semi-automatics , permanently mounted wires, perpetually tangled wires, problem when replacing

Mass cable 2,10m , electrode cable 2,10m , mig cable Mb15 2,05m

⭐(1) MIG with CO₂ / MIX / MMA cylinder - standard polarity (+) cable connector in the photo below attached to (+) weld plus

⭐(2) Flux / TIG - requires variable negative polarity (-) cable connector in the photo below plugged into (-) weld minus

✅The cable connector is connected to the MIG holder if the cable connector is embedded, for example, in the red socket (+) the MIG holder has polarities (+)

Professional feeder with roller 0,8/1,0 mm, precise wire guidance on ball bearing, powerful electric motor with copper winding.

The roller has notching, which prevents slipping, always feeds the wire securely

Self-shielding welding wire for welding steel elements without the use of shielding gas.

The use of wire allows welding without the need for gas cylinders

Popularly called hot start, it allows by temporarily increasing the welding current above the value set by the welder. HOT START works at the moment of arcing and is designed to prevent the electrode from sticking to the material. It is a great convenience when lighting the electrode.

cuts off/minimizes welding voltage and current in case of short circuit of the electrode with the welded material. ANTI STICK allows the welder to detach the electrode more easily.

stabilizes the arch regardless of its length. Regulates the dynamics of the welding arc. By reducing the value of the function, it gives a soft arc and a smaller depth of melt, while increasing the value of the function causes deeper melting and the possibility of welding with a short arc. At the highest value for the ARC FORCE function, it is possible to "press the electrode into a lake of molten metal and burn the material through.

⏩ The device from the MAJSTER Pro series is a welding machine designed for welding steel in a gas shield and self-shielding wire FCAW (FLUX), MIG/MAG, MMA, as well as the TIG Lift method (this requires the purchase of an additional TIG Lift welding handle)

⭐ It is intended for all kinds of welding work, in locksmith workshops, repair workshops, bodywork, farm, etc.

✅ The power source was built on IGBT LATEST GENERATION transistors ensuring minimum electromagnetic interference, small power losses in basic systems, enabling increase in efficiency and reliability of the power source, lower consumption

✅Technical data:

• Brand - Majster PRO
• Model MP0141
• Output current- 210A Power greater than 90% of allegro 300A
• Welding methods: MIG/MAG, MMA, FLUX - semi-automatic welding with self-shielding wire "without gas"
• Voltage - 230v 50Hz
• Wire diameter: 0.6 - 1,0 mm
• Diameter of MMA electrode - 1,6-5.0mm
• Rated duty cycle (efficiency) 60%
• Efficiency - 85%
• insulation class - IP21S
• Cable length with handle EURO - 205 cm
• Length of mass cable - 210 cm
• Length of electrode cable - 210 cm
• Net/ gross weight - 5,1kg / 7,1kg
• dimensions - 41,5 / 25 x 33,5

✅Included:

• semi-automatic MP0141
• cable with EURO mig, mig/flux handle
• MMA electrode cable
• mass cable
• shielding wire 0,45kg 0,9mm
• welding mask

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With VAT invoice
Parametry	Brand	Majster Pro
Parametry	Supply voltage (V)	230
Parametry	Duty cycle time	60%
Parametry	Maximum electrode diameter	5 mm
Parametry	Device weight	5.1 kg
Parametry	Product weight with unit packaging	7.15 kg
Parametry	Manufacturer code	MP0141
Parametry	EAN (GTIN)	5904553384059
Parametry	Packaging status	original
Parametry	Model	MP0141 MAJSTER PRO
Parametry	Welding methods	MIG/MAG,MMA,TIG
Parametry	Additional features	welding mask included,infinitely adjustable welding current,EURO handle,EURO holders,LCD display