Suvirinimo aparatas MIG 224/15 LCD Dual Pulse Magnum inverter

Trumpai apie prekę

Prekė: Suvirinimo aparatas MIG 224/15 LCD Dual Pulse Magnum inverter. Kategorija: Pusiau automatiniai suvirinimo aparatai.

• Gamintojas: Magnum
• Modelis: U MI 224 LC15P
• Ilgis: 500 mm
• Plotis: 210 mm
• Aukštis: 380 mm

Portable semi-automatic 15 kg spools with wire, equipped with a 4-roll wire feeder.

The MAGNUM MIG 224/15 LCD DUAL PULS V2 in a refreshed version with a new display and software is a lightweight portable semi-automatic welding machine powered from a single-phase 230V network with a maximum welding current of 200A.

Offered device made in inverter technology with MCU microcontroller (integrated microprocessor system). It is equipped with an intuitive, easy-to-use control panel that allows you to quickly and efficiently set all the most important welding parameters.

The power source was built on the basis of the latest technology using IGBT transistors, which translates into reduced electromagnetic interference, low power losses, increased efficiency and reliability of the power source and significantly reduced energy consumption. The design and software combined with digital control enable the achievement of excellent welding parameters and high-quality welded joints.

The device has smooth adjustments of welding parameters, is equipped with an overload thermal protection system, preventing excessive overheating. The welder is equipped with a 4-roll wire feeder with a "euro connector" socket allows you to connect different types of welding brackets and output to the gas heater.

The welding machine is characterized by a wide range of applications, it is dedicated to all kinds of welding work in households, locksmith workshops, repair workshops, etc.

Features and advantages of the device:

✅Inductance adjustment -optimizes arc characteristics depending on the thickness of the material being welded.

✅Two-bar 2t - pressing the button initiates gas outflow and welding current, releasing the button turns off welding current and gas outflow

✅Four-point 4t - pressing and releasing the handle button initiates gas outflow and welding current, re-pressing and releasing the button turns off the welding current and gas outflow

✅S-2T - special double bar with HOT Start and end current (crater filling)

✅S-4T - special four-bar with HOT Start and end current (crater filling)

✅Synergy - automatically selects welding parameters, when adjusting the voltage, the wire feed speed is selected automatically

✅PULS/DUAL PULS - synergistic welding functions with single or double pulse, thanks to which it is possible to obtain high-quality welds similar to the TIG method (husk effect). The PULS function is helpful in welding any weldable materials, especially those made of stainless steel (PULS function) and aluminum (DUAL PULS function)

✅Memory - the device has a memory on which the user can save and recall any settings

✅SPOT TIME - spot welding (adjustable welding time)

✅ Sturdy 4x4 feeder

LIST OF SYNERGISTIC PROGRAMMES:

✅Fe – ordinary steel 0.8 / 1.0 – program for welding black steel in CO2 or Ar/CO2 shield.

✅AlMg – aluminium and aluminium alloys with magnesium 1.0 / 1.2 - program for welding aluminium in Argon sheath.

✅AlSi – aluminium and aluminium alloys with silicon 1.0 / 1.2 - Argon sheathed aluminium welding program.

✅CuSi3 – soldering 0.8 / 1.0 - MIG soldering program in Argon shield

✅CuAl8 - soldering 0.8 / 1.0 - program for soldering aluminum sheets by MIG method in Argon shield

✅E308 – stainless steels 0.8 / 1.0 - program for MIG welding of stainless steels, in Argon sheath with 2% CO2 admixture, or pure argon

✅E316 – high alloy stainless steels 0.8 / 1.0 - program for welding high alloy stainless steels by MIG method, in Argon sheath with 2% CO2 admixture, or pure argon

PARAMETER ADJUSTMENT RANGE (depending on the welding option selected):

• Wire burning time - correction of wire burning height : -50 - 50 [%]
• Pulse frequency - pulsation frequency adjustment: 0,5 - 5,0 [Hz]
• Pulse width - pulsation balance: 20 - 80 [%] (50% is the balance setting)
• Pulse height - pulse amplitude adjustment: 5 - 50 [%]
• Peak current - peak current voltage correction: -50 - 50 [%]
• Base current - base current voltage correction: -50 - 50 [%]
• Free wire extension - adjustment of the initial speed of the wire (access): 1,0 mm to 15m (Duration 4 seconds)
• Preflow - regulation of gas outflow time before welding: 0 - 10 [s]
• Postflow - regulation of gas outflow time after welding: 0,1 - 50 [s]
• Final current - regulation of final current when welding with S2T and S4T function: 24 - 200 [%]
• Initial current - adjustment of the initial current when welding with S2T and S4T function: 24 - 200 [%]
• Current build-up time - adjustment of the initial current duration (S2T) : 0 - 50 [s]
• Current drop time - regulation of the duration of the final current (S2T) : 0 - 50 [s]
• Final voltage - correction of final current voltage (S2T and S4T) : -50 - 50 [%]
• Initial voltage - correction of initial current voltage (S2T and S4T) : - 50 - 50 [%]
• Duration of spot welding - adjustment of welding time at the point for a given point: 0,1 - 9,9 [s]

TECHNICAL DATA:

• Power supply: AC 230 [V], 50 [Hz]
• Security Required: 20 [A]
• Efficiency: 60 [%]
• Idle Voltage: 69 [V]
• MIG/MAG welding current: 30 - 200 [A]
• MIG/MAG welding voltage: 17,5 - 28 [V]
• MMA welding current: 20 - 180 [A]
• Reel size: max. 15 [kg]
• Wire diameter: 0,8/0,9/1,0/1,2 [mm]
• Housing Protection Class: IP21
• Weight: 20,5 [kg]

THE SET INCLUDES:

➡ Complete device MAGNUM MIG 224 LC15 V2,

➡ MIG/MAG MB24 3m NT working cable,

➡ MMA working cable,

➡ Mass cable with clamp,

➡ Chassis,

➡ User manual.

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With VAT invoice
Parametry	Brand	Magnum
Parametry	Power consumption	8 kVA
Parametry	Supply voltage (V)	230
Parametry	Duty cycle time	60%
Parametry	Maximum electrode diameter	4 mm
Parametry	Wire diameter (mm)	0,8-1,2
Parametry	Device weight	20.5 kg
Parametry	Welding range	30–200 A
Parametry	Height	380 mm
Parametry	Length	500 mm
Parametry	Width	210 mm
Parametry	Length of ground cable	200 cm
Parametry	Welding cable length	300 cm
Parametry	Product weight with unit packaging	25 kg
Parametry	Manufacturer code	U MI 224 LC15P
Parametry	EAN (GTIN)	5905323119178
Parametry	Model	U MI 224 LC15P
Parametry	Welding methods	MIG/MAG,MMA,TIG
Parametry	Additional features	transport wheels,infinitely adjustable welding current,EURO handle,LCD display