Suvirinimo aparatas MAGNUM THF 238 PRO-X AC/DC TIG/MMA, tinkamas aliuminiui

Trumpai apie prekę

Prekė: Suvirinimo aparatas MAGNUM THF 238 PRO-X AC/DC TIG/MMA, tinkamas aliuminiui. Kategorija: Pusiau automatiniai suvirinimo aparatai.

• Gamintojas: Magnum
• Modelis: THF 238P AC/DC PRO-X
• Ilgis: 430 mm
• Aukštis: 460 mm

TIG MMA MAGNUM THF 238 PRO-X AC DC ALUMINIUM welder

MAGNUM

✅ Soft digital control panel

✅ Welder AC/DC

✅ Function TIG POINT

✅ Function 2/4Takt

✅ Designed for professional use

✅ Easy to use even for amateurs

✅ Function BiLEVEL

✅ Welding with PULSEM

✅ Stepless welding current adjustment

✅ Welding ALUMINIUM

✅ Welding STAINLESS STEEL

✅ Transistors IGBT

✅ Display LCD Easy to use

The THF238 PRO-X AC/DC device by MAGNUM is a professional, lightweight inverter welder designed for TIG HF welding (with contactless arc ignition) with alternating current AC and direct current DC . THF 238 provides excellent performance in welding aluminum and its alloy, non-alloy steel, low-alloy steel, high-alloy steel, titanium and other weldable metals and alloys. The device can also be welded using MMA method using hot melt coated electrodes.

The THF 238 PRO welder is powered from a single-phase 230V network, has a high 60% duty cycle at 200 A current, which allows it to be used in various industrial segments. The device has an intuitive, easy-to-use control panel that allows for quick and precise selection of individual welding parameters. The control panel is equipped with a multifunctional display illustrating the values of individual parameters, the adjustment of which is carried out with a single knob.

The welding machine is characterized by a wide range of applications, it is dedicated to all kinds of welding work in factories, industrial plants, locksmith workshops, repair workshops, etc.

✅ TIG hand welding of aluminium and its alloys

✅ manual TIG welding of copper and its alloys - TIG welding of alloy steels also stainless

✅ TIG manual welding of ordinary and high-strength structural steels

✅ manual welding with wrapped electrodes, ordinary structural steels and high strength

✅ manual welding with cold and hot coated cast iron electrodes - manual welding with coated alloy steel electrodes also stainless

✅for semi-professional and professional use

The current source was built on the basis of IGBT (Insulated Gate Bipolar Transistor) transistors, which provide a minimum of electromagnetic interference, small power losses in basic systems, enabling increased efficiency and reliability of the power source. Very high efficiency, which translates directly into lower energy consumption, and high switching frequency, ensure rapid adjustment of the current to changes in parameters during welding.

• Power supply: AC 230 [V], 50/ [Hz],
• Security Required: 25 [A]/C
• Power consumption: 7 [kW]
• Efficiency: 60 [%]
• Idle voltage Uo: 70 [V]
• TIG AC welding current: 10 - 200 [A]
• TIG DC welding current: 10 - 200 [A]
• MMA welding current: 10 - 200 [A]
• Adjustment - current rise/fall time: 0 - 10 [s]
• Adjustment - gas outflow time after welding 0 - 10 [s]
• Housing Protection Class: IP23
• Weight: 10 [kg]

• WELDING HANDLE TIG 26
• mass cable
• Spare parts for handle
• Gas cable

• Graph of TIG process,
• Selection of waveform when welding TIG AC - sine wave, rectangular,
• AC Balance,
• AC current frequency,
• Bi-LEVEL - the ability to switch between two welding current values
• Gas flow before welding,
• Starting current,
• Time of electricity build-up,
• Welding current,
• Time of falling current,
• Final current (extinguishing),
• Gas flow after welding
• TIG PULS: peak current, base current, pulse frequency, pulse width
• Operating mode 2T/4T
• TIG Lift contact arc ignition
• TIG HF,
• TIG Point - spot welding

• Welding current intensity,
• Hot Start – easier ignition of the electrode,
• Arc Force – stabilizes the welding arc and eliminates the formation of short circuits, facilitated welding in forced positions.

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With VAT invoice
Parametry	Brand	Magnum
Parametry	Power consumption	7 kVA
Parametry	Supply voltage (V)	230
Parametry	Duty cycle time	60%
Parametry	Maximum electrode diameter	4 mm
Parametry	Device weight	10 kg
Parametry	Welding range	5–200 A
Parametry	Height	460 mm
Parametry	Length	430 mm
Parametry	Length of ground cable	300 cm
Parametry	Welding cable length	400 cm
Parametry	Product weight with unit packaging	18 kg
Parametry	Manufacturer code	U I THF238PRO-X
Parametry	EAN (GTIN)	5905323107472
Parametry	Model	THF 238P AC/DC PRO-X
Parametry	Welding methods	MMA,TIG
Parametry	Additional features	infinitely adjustable welding current,EURO handle,LCD display