Suvirinimo aparatas MAGNUM MIG 211 ALU SYNERGY MAG MMA TIG DC Lift FLUX 200A

Trumpai apie prekę

Prekė: Suvirinimo aparatas MAGNUM MIG 211 ALU SYNERGY MAG MMA TIG DC Lift FLUX 200A. Kategorija: Pusiau automatiniai suvirinimo aparatai.

• Gamintojas: Magnum
• Modelis: U MI 211 SYN LED
• Ilgis: 480 mm
• Plotis: 220 mm
• Aukštis: 360 mm

✅MIG: 40 – 200A, MMA: 1 0 – 16 0A, TIG: 10-160A

✅constructed on the basis of modern electronics,

✅friendly user interface,

✅smooth adjustment of all welding parameters,

✅synergy - the device has synergistic programs,

✅manual mode settings,

✅four-roll feeder,

✅ Euro socket - the possibility of using any MIG holder equipped with a EURO plug,

✅2T/4T operating modes - weld as standard in 2T mode or switch to 4T mode when you have a lot of work and long welds to position,

✅Accurate adjustment of welding arc length,

✅regulation of welding inductance - wider face and smaller melt or narrow face and deep melt? Choose the optimal settings for the work you are currently doing,

✅readable LED display, showing all parameters,

✅ TIG DC Lift welding capability,

⏭WHAT WILL YOU FIND IN THE PACKAGE?

✔ Welder Magnum MIG 211 Synergy LED

✔ MIG MB-15/3m welding torch

✔ MMA electrode cable

✔ Mass cable

✔ Instructions for use PL

MAGNUM MIG 211 Synergy LED 4x4 is a technologically advanced welding device for welding using the MIG/MAG, MMA, TIG LIFT method. The device is designed for manual, electric welding of low-carbon steels, low-alloy steels, high-alloy steels, stainless and acid-resistant steels, aluminum and its alloys, etc. Magnum MIG 211 Synergy LED 4x4 is designed for all kinds of welding work performed by professionals in car workshops, locksmiths, repair workshops, industrial, etc., as well as amateurs / hobbyists in home workshops. Thanks to an extremely simple control panel, a well-chosen algorithm of synergistic programs and digital process control, this device is extremely easy to use and allows a person even without welding experience to clone welded joints. In addition to synergistic control, the device has the ability to set welding parameters in a traditional (manual) way, bypassing synergy.

The power source is built on high-performance IGBT transistors for high performance, low power consumption and reliability.

⏭Regulation of MIG/MAG welding inductance

Full control over arc characteristics thanks to MIG/MAG welding inductance adjustment. Control the amount of chipping and the width of the weld face and the depth of melting.

⏭Synergic programmes

✅ has synergistic programs for welding: black steel, stainless steel, aluminum alloys, self-shielding wire and CuSi3 soldering,

✅ the possibility of disabling synergy and welding in manual mode - parameter adjustment according to. own recognition and experience.

⏭Professional 4-ROLL wire feeder

Professional wire feeder 4R (4x4) - is a reliable wire feeding regardless of the weight of the spool and the type of welding wire. The proven feeder mechanism has a big impact on the smoothness of wire feeding, and this already translates directly into the welding parameters of the device.

⏭High quality EURO socket

The EURO socket used allows you to work with any MIG/MAG welding torch that complies with this international standard.

Quick change of welding polarity - welding in solid wire in gas shield or special self-shielding wire. A quick change of MIG/MAG polarity is the ability to quickly retool the device to current needs.

The device allows you to connect a Spool Gun holder with a mini wire feeder mounted in it and a D100 spool of steel or colored wire.

⏩POWER SUPPLY PARAMETERS

• Supply Voltage: Single Phase 230V
• Technology: IGBT Inverter
• Current taken from the mains: 20A
• Idle Voltage: 55V
• Degree of protection: IP21
• Weight: 11.6kg

⏩ MIG/MAG welding parameters:

• MIG/MAG welding current: 40 - 200A
• MIG/MAG duty cycle: 60% 200A, 100% 120A
• MIG/MAG welding voltage: smooth adjustment
• Wire feed speed: smooth adjustment
• Spool with wire: max 5kg (D200)
• MIG/MAG welding polarity change: YES
• Welding Inductance Adjustment: YES

⏩ TIG welding parameters:

• TIG welding current: 10 - 160A
• Output Current: DC Constant
• Arch ignition: contact - Lift
• TIG duty cycle: 60% 160A
• TIG welding current regulation: smooth

⏩MMA welding parameters:

• MMA welding current: 10 - 160A
• Electrode diameter: 1,6 - 5,0 mm
• MMA Welding Current Adjustment: Smooth

• INDUCTANCE - weld face width control and reduction of welding chipping,

• IGBT - welding machine is made in modern inverter technology using IGBT transistors. Thanks to this, it has stable welding parameters, enjoys high efficiency and, above all, ensures good welding quality.

• MMA - this is probably the best known and widespread welding method. The type and diameter of the wrapped electrode is selected depending on the type of material being welded. The MMA method does not require shielding gases. Welding is carried out using an electrode in a special sheath, which under the influence of the heat of the welding arc melts to form a weld. Melting sheath provides protection for the welding lake.

• FCAW (FLUX) - a popular variant of the MAG method - semi-automatic welding with a hot melt electrode (welding wire on a spool). The main difference is that it is welded with a special self-shielding wire, which does not require the use of shielding gas. Simplifying, we can say that this method combines two processes: MAG welding and MMA electrode welding.

• MIG/MAG is a popular process both in hobby applications and in industry. It consists in welding with a hot melt electrode (in the form of wire wound on a spool) in a gas shield. The advantages of semi-automatic MIG/MAG welding include: ease of mastering the method at the basic level, high welding efficiency, high quality of the resulting weld.

• TIG DC - welding with a non-melting electrode in an inert gas shield, e.g. alloy and non-alloy steels.

• SYNERGY MIG/MAG/FLUX - a program that automatically selects the wire feed to the set welding current. Attention! The ability to choose the diameter of the welding wire and the type of gas - greater precision in the operation of Synergy.

• 4T - pressing and releasing the handle button initiates gas outflow and welding current, re-pressing and releasing the button turns off the welding current and gas outflow,

• 2T - pressing the button initiates gas outflow and welding current, releasing the button turns off welding current and gas outflow

Choose a brand whose history dates back to the beginning of the twenty-first century. Magnum is the leading brand of welding equipment in Poland.

A wide range of Magnum devices meets the needs of not only novice users, but also more advanced ones. Depending on the selected model, it can be dedicated to workshop applications as well as for heavy industry.

Customers choose the Magnum brand most often due to its high quality, affordable price and reliability.

Specifications