Suvirinimo aparatas Magnum MIG 211 ALU Synergy MAG MMA TIG DC Lift 200A 230V

Trumpai apie prekę

Prekė: Suvirinimo aparatas Magnum MIG 211 ALU Synergy MAG MMA TIG DC Lift 200A 230V. Kategorija: Pusiau automatiniai suvirinimo aparatai.

• Gamintojas: Magnum
• Modelis: MIG 211 SYNERGIA LED
• Ilgis: 480 mm
• Plotis: 220 mm
• Aukštis: 360 mm

Welding methods: MIG/MAG, MMA, TIG DC Lift | Important functions: Synergy, 2T/4T, 4-roll feeder | Welding current: up to 200A

Efficient migomat with 4-roll wire feeder

MIG 211 Synergy LED 4x4 welding machine is a technologically advanced welding device for MIG/MAG, MMA, TIG LIFT welding.

The device is designed for manual, electric welding of low-carbon steels, low-alloy steels, high-alloy steels, stainless and acid-resistant steels, aluminum and its alloys, etc.

Magnum MIG 211 LED synergy 4x4 is designed for all kinds of welding work performed by professionals in car workshops, locksmiths, repair workshops, industrial, etc., as well as amateurs / hobbyists in home workshops.

Thanks to an extremely simple control panel, a well-chosen algorithm of synergistic programs and digital process control, this device is extremely easy to use and allows a person even without welding experience to clone welded joints.

In addition to synergistic control, the device has the ability to set welding parameters in a traditional (manual) way, bypassing synergy.

The power source is built on high-performance IGBT transistors for high performance, low power consumption, and reliability.

DISCOVER THE ADVANTAGES OF MIG 211 SYNERGY LED 4x4

• smooth adjustment of all welding parameters,
• synergy - the device has synergistic programs,
• manual mode settings,
• four-roll feeder,
• Euro socket- the possibility of using any MIG holder equipped with a EURO plug,
• 2T/4T operating modes - weld as standard in 2T mode or switch to 4T mode when you have a lot of work and long welds to position,
• accurate adjustment of the length of the welding arc,
• regulation of welding inductance - wider face and smaller melt or narrow face and deep melt? Choose the optimal settings for the work you are currently doing,
• readable LED display, showing all parameters,
• possibility of TIG DC Lift welding,
• simultaneous change of wire feed voltage and speed,
• change the speed of feeding wire in manual mode,
• change the value of welding current voltage in manual mode.

PROFESSIONAL 4x4 FEEDER

Professional 4R feeder - reliable wire feeding regardless of spool weight, handle length and welding wire type. Proven mechanism.

Solid workmanship

The device is made of elements that allow for effective operation of the welding machine in demanding conditions.

The power source is based on IGBT transistors that provide a minimum of electromagnetic interference, allowing you to increase the efficiency and reliability of the device.

The handle attached to the welding machine housing allows it to be comfortably moved to its destination.

Power supply parameters:

• Supply Voltage: Single Phase 230V
• Technology: IGBT Inverter
• Current taken from the mains: 20A
• Idle Voltage: 55V
• Degree of protection: IP21
• Weight: 11.6kg

MIG/MAG welding parameters:

• MIG/MAG welding current: 40 - 200A
• MIG/MAG duty cycle: 60% 200A, 100% 120A
• MIG/MAG welding voltage: smooth adjustment
• Wire feed speed: smooth adjustment
• Spool with wire: max 5kg (D200)
• MIG/MAG welding polarity change: YES
• Welding Inductance Adjustment: YES

TIG welding parameters:

• TIG welding current: 10 - 200A
• Output Current: DC Constant
• Arch ignition: contact - Lift
• TIG duty cycle: 40% 200A
• TIG welding current regulation: smooth

MMA welding parameters:

• MMA welding current: 10 - 160A
• Electrode diameter: 1,6 - 5,0 mm
• MMA Welding Current Adjustment: Smooth

• Device Magnum MIG 211 Synergy LED 4x4
• Welding torch MIG EURO MB 15 3m
• MMA electrode holder
• Mass cable
• User manual PL

Specifications