Suvirinimo aparatas Magnum 208 Alu synergy L 4x4 MIG/MAG 200A

Trumpai apie prekę

Prekė: Suvirinimo aparatas Magnum 208 Alu synergy L 4x4 MIG/MAG 200A. Kategorija: Pusiau automatiniai suvirinimo aparatai.

• Gamintojas: Magnum
• Modelis: MIG 208 ALU SYN L 4x4
• Ilgis: 560 mm
• Plotis: 265 mm
• Aukštis: 410 mm

Welding machine Migomat Magnum 208 Alu synergy L 4x4 MIG/MAG 200A

MAGNUM

The MAGNUM MIG 208 Alu Synergy 4x4L is a professional, synergistic semi-automatic welding machine designed for manual, electric welding of low-carbon steel, low-alloy steel (MAG), alloy steel and aluminum and its alloys (MIG).

The device can also be LUTOSPAWAN, welded using the MMA method and the TIG Lift method. It is designed for all kinds of welding work, in locksmith workshops, repair workshops, industrial, factories, etc. Thanks to the use of synergistic settings and a clear LCD screen, the device is extremely easy to use and can be used by welders even with minimal experience.

The power source was built on the basis of IGBT transistors providing a minimum of electromagnetic interference, enabling increased efficiency and reliability of the power source, lower energy consumption, and rapid adjustment of the current to changes in parameters during welding.

MIG 208 Alu Synergy L 4x4 offers MIG-MAG welding with traditional and synergistic settings,

containing ready-made programs dedicated to stainless steel, aluminum and soldering. A special feature of distinguishing this model is the presence of a four-roll 4x4 feeder and advanced synergic programs: COLDWELD, which allows welding thin sheets without the risk of overheating, and FASTMIG, allowing for fast and deep welding with a minimum amount of chipping.

✅Welding current 40-200A

✅ Synergistic programs Fe, FLUX, AlMg, AlSi, ER308, ER316, CuSi, CuAl

✅Possibility of manual settings

✅ Welding without gas - FLUX

✅ Wire burn height adjustment - BURN BACK

✅ Inductance regulation less chipping

✅ Welding point

✅ Soldering CUSI3

✅COLD WELD

✅FAST MIG

✅ Easy and smooth adjustment of welding parameters

✅ Easy to read LCD panel

✅ ARC FORCE function

✅ Initial current regulation - HOT START

✅ Regulation of gas outflow time after welding

✅ Adjusting welding time at the point

✅ Final current regulation - crater filling

✅ Adjustable inductance

✅ Choosing the type of electrode used - MMA

✅ Features 2T/4T/S4T, SPOT, HOT START, ARC FORCE, VRD

✅ Sturdy 4x4 metal feeder

SYNERGIC

➡ Fe – black steel. 0.6 / 0.8 / 1.0 CO2 i Ar+CO2

➡ Fe - Flux, core wire welding. 0.8 / 0.9 / 1.2 self-shielding*

➡ AlMg - aluminium alloys with magnesium 1.0 / 1.2 Ar

➡ AlSi - aluminium alloys with silicon 1.0 / 1.2 Ar

➡ ER308 – stainless steels type 308 0.8 / 1.0 Ar+CO2 (1÷2%) or pure Ar

➡ ER316 – stainless steels type 316 0.8 / 1.0 Ar+CO2 (1÷2%) or pure Ar

➡ CuSi – soldering (galvanized sheets) 0.8 Ar

➡ CuAl – soldering (aluminum sheets) 0.8 Ar

COLD

➡ Fe – black steel. 0.8 / 1.0 CO2 i Ar+CO2

➡ ER308 – stainless steels type 308 0.8 / 1.0 Ar+CO2 (1÷2%) or pure Ar

➡ ER316 – stainless steels type 316 0.8 / 1.0 Ar+CO2 (1÷2%) or pure Ar

FMIG

➡ Fe – black steel. 1.0 Ar+CO2

➡ AlMg - aluminium alloys with magnesium 1.0 / 1.2 Ar

➡ AlSi - aluminium alloys with silicon 1.0 / 1.2 Ar

➡ ER308 – stainless steels type 308 1.0 Ar+CO2 (1÷2%) or pure Ar

➡ ER316 – stainless steels type 316 1.0 Ar+CO2 (1÷2%) or pure Ar

Available welding methods:

• MIG/MAG with synergy
• MIG/MAG with manual settings
• TIG LIFT - using a special handle with a valve, arc ignition is then carried out by lightly rubbing the non-melting electrode against the welded material
• MMA - using hot melt electrodes wrapped in rutile, alkaline, acidic

THE SET INCLUDES:

• MIG 208 ALU SYnergy L 4x4
• MIG/MAG MB15 3m holder,
• Electrode holder,
• Bulk holder,
• Operating instructions.
• Welding torch consumables
• Welding mask
• Gas line
• Hammer brush

TECHNICAL DATA:

• AC power supply 230 [V], 50/60 [Hz]
• Security required 20 [A], class C
• MIG/MAG welding current 40 ÷ 200 [A]
• Welding voltage MIG/MAG 18 ÷ 28 [V]
• Idle voltage 73 [V] / with VRD 13,5 [V]
• Wire diameter* (*see program table)
• 0.6 ÷ 1.2 [mm]
• Efficiency 60 %
• Enclosure protection class IP21S
• Weight 11 [kg]

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With VAT invoice
Parametry	Brand	Magnum
Parametry	Power consumption	5.7 kVA
Parametry	Supply voltage (V)	230
Parametry	Duty cycle time	60%
Parametry	Maximum electrode diameter	5 mm
Parametry	Wire diameter (mm)	0,8-1,0
Parametry	Device weight	11 kg
Parametry	Welding range	40–200 A
Parametry	Height	410 mm
Parametry	Length	560 mm
Parametry	Width	265 mm
Parametry	Length of ground cable	200 cm
Parametry	Welding cable length	300 cm
Parametry	Manufacturer code	U MI 208ALU 4X4 #ZESTAW2AK
Parametry	EAN (GTIN)	5907195568795
Parametry	Model	MIG 208 ALU SYN L 4x4
Parametry	Welding methods	MIG/MAG,MMA,TIG
Parametry	Additional features	welding mask included,infinitely adjustable welding current,EURO handle,LCD display