Suvirinimo aparatas Ideal TECNOMIG 205 4x4 LCD MIG/TIG/MMA Alu synergy

Trumpai apie prekę

Prekė: Suvirinimo aparatas Ideal TECNOMIG 205 4x4 LCD MIG/TIG/MMA Alu synergy. Kategorija: Pusiau automatiniai suvirinimo aparatai.

• Gamintojas: IDEAL
• Modelis: TECNO MIG 205 LCD MIG/TIG/MMA SYNERGIC 4x4
• Ilgis: 550 mm
• Plotis: 250 mm
• Aukštis: 385 mm

Migomat Ideal TECNOMIG 205 4x4 LCD MIG/TIG/MMA Alu synergy

IDEAL

Migomat TECNOMIG 205 4x4 LCD MIG/TIG/MMA welder

IDEAL

Microprocessor-controlled semi-automatic welding machine for MIG-MAG welding, soldering, FLUX, TIG Lift and MMA welding. Welding current 200A (MIG), 150A (TIG/MMA). Power supply 230V. Welding wire diameter. 0,6-1,0mm. 4-roll wire feeder. Synergy

Technical parameters

TECNOMIG 205 4x4 LCD SYNERGIC is an inverter synergistic semi-automatic welding machine designed for arc welding using the MIG/MAG, TIG LIFT, MMA and FLUX methods.

The device is designed for a wide range of applications, from maintenance work to car body repairs.

Welding is carried out in an inert gas shield, active or mixture and with reverse polarity without gas.

Quick synergistic adjustment of welding parameters through the LCD display makes the device very easy to use.

All you need to do is set the thickness of the welded material and start welding: intelligent and automatic welding arc control system, step by step, will select the best parameters, for each welding position and for each material.

The user can also manually set the length of the welding arc and adjust the appearance of the weld to suit their needs.

ADVANTAGES of the TECNOMIG 205 LCD:

✅ Built-in synergistic programs for welding: stali, stainless steel and aluminium, soldering and FLUX

✅ Possibility of manual and synergistic settings !

✅ Possibility Soldering

✅ Welding current 21-200A

✅ Regulation of inductance

✅ 2-bar 4-bar function

✅ SPOT WELDING

✅ Welding FLUX

✅ Fan walking system

✅ Device powered by 230V

✅ Applicability of the handle TIG LIFT

✅ COLD function controls heat to some extent and reduces distortion of thin materials.

✅ Clear intuitive panel for selecting welding parameters

✅ Burn Back - regulation of wire burning time,

✅ POST GAS - setting the gas outflow after welding

✅ Solid Metal 4-Roller FEEDER

✅ Small size and high mobility of the device

✅ MAN - manual mode

✅ COLD - mode with limited heat release during welding (for thin materials)

✅ FMIG - mode for increased welding efficiency and speed

The LCD display allows for precise adjustment of welding parameters such as:

• regulation of inductance
• wire access
• Wire burning
• Gas outflow after welding
• spot weld time (in SPOT mode)

The device also has MMA parameter adjustments such as:

• ARC FORCE regulation
• HOT START regulation
• The VRD (voltage reduction device) function reduces the idle voltage on the electrode to a safe value; it enables operation in an environment with increased humidity. (ON/OFF)

Inductance regulation – allows you to reduce the amount of heat at the welding site. The sheet does not deform and the protective layer of zinc is not damaged, the function used for lutowelding. Higher inductance (soft arc) results in a wider welding lake and less chipping. In contrast, lower inductance produces a stable, focused arc.

LUTOSPELING - MIG/MAG soldering has adopted a name created from two different technologies. Soldering as a bonding process in which there is no melting of the native material only solder and MIG / MAG welding technology, from which the preparation of the edges of the material as for welding and the method of melting the wire in the electric arc in the atmosphere of protective gases, fed automatically from the spool, were used. Soldering could be called soldering by welding method. The protective gas used is most often pure argon

In the welding process, evaporating zinc is the cause of the porosity of the welds, because high temperatures formed in this area destroy the protective layer, the combined elements lose their corrosion resistance. Mechanical removal of zinc before welding and re-application in places where evaporation has occurred is a very expensive process. Supplementing cavities with zinc preparations (paints) does not sufficiently protect the structure against corrosion. In addition, it should be noted that when welding galvanized sheets, there is a very large emission of zinc vapors harmful to health. These inconveniences can be avoided by using MIG/ MAG soldering technology.

MIG COLD (Cold Metal Transfer) is an advanced MIG/MAG welding variant, characterized by low heat input to the material. It uses precise control of the electric arc, where the welding wire is cyclically retracted, which minimizes heating. This process is ideal for welding thin sheets, aluminum or stainless steel, ensuring high weld quality, less deformation and reduction of spatter. Mainly used in automotive and precision industry.

Two-bar 2t - pressing the button initiates gas outflow and welding current, pressing the button turns off the welding current,

Four-point 4t - pressing and releasing the handle button initiates gas outflow and welding current, re-pressing and releasing the button turns off the welding current,

IGBT - The welding machine uses modern transistors, a solution that provides a minimum of electromagnetic interference small power losses in basic systems, allowing to increase the efficiency and reliability of the power source.

ATC function- for thin elements made of aluminum alloys advanced thermal control function. The ATC function stabilizes the electric arc and reduces the peak value of the welding current, reducing the amount of heat transferred to the material. As a result, it greatly facilitates the welding of thin aluminum elements, and results in less deformation of the material, less overheating and a narrow zone of heat impact.

adjustable feeder access speed,

Burn Back - regulation of wire burning time,

POST-GAS - regulation of gas outflow after welding,

spot welding - spot welding, with the possibility of setting the welding time at the point, available when welding Pulse MIG.

• welding torch 15/3 m
• mass cable with clamp
• MMA Electrode Cable
• power cord with 230V plug
• Operating elements of the handle
• Hammer brush
• welding disc
• Gas pipe

• Current taken from the mains: 20,3 A
• Power supply network protection: 25C
• Rated supply voltage: 230 V; 50Hz (1ph)
• Power: 6,4 kW
• Idle Voltage: 66 V
• Maximum current 200 A: (MIG/TIG) / 180 A (MMA)
• Current at 100%: 155 A (MIG/TIG) / 140 A (MMA)
• Diameter of aluminum wire: 1,0 - 1,2 mm
• Wire diameter for soldering: 1,0 mm
• Diameter of self-shielding wire: 0,8 - 1,2 mm
• Steel wire diameter: 0,6 - 1,0 mm
• Stainless steel wire diameter: 0,8 - 1,0 mm
• Welding electrode diameter: 1,6 - 4,0 mm
• Welding Current Adjustment Degrees: Gradually
• Welding Current Adjustment Range: 21 - 200 A (MIG) / 11 - 200 (TIG) / 21 - 180 A (MMA)
• Wire spool size: D200 (2kg and 5kg)
• Degree of protection: IP23S
• Weight of the device / set: 15 / 17 kg
• Overall dimensions L x W x H: 510x230x370 mm
• Package Dimensions L x W x H: 550x250x385 mm

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With VAT invoice
Parametry	Brand	IDEAL
Parametry	Power consumption	6.4 kVA
Parametry	Supply voltage (V)	230
Parametry	Duty cycle time	60%
Parametry	Maximum electrode diameter	4 mm
Parametry	Wire diameter (mm)	0,6-1,0
Parametry	Device weight	17 kg
Parametry	Welding range	21–200 A
Parametry	Height	385 mm
Parametry	Length	550 mm
Parametry	Width	250 mm
Parametry	Length of ground cable	200 cm
Parametry	Welding cable length	300 cm
Parametry	Product weight with unit packaging	17 kg
Parametry	Manufacturer code	TMIG205LCDV3
Parametry	EAN (GTIN)	5903991111111
Parametry	Packaging status	original
Parametry	Model	TECNO MIG 205 LCD MIG/TIG/MMA SYNERGIC 4x4
Parametry	Welding methods	MIG/MAG,MMA,TIG
Parametry	Additional features	infinitely adjustable welding current,EURO handle,LCD display