Suvirinimo aparatas IDEAL TECNO MIG 202 LED MMA/TIG/FLUX/ALU, IGBT, Synergy

Trumpai apie prekę

Prekė: Suvirinimo aparatas IDEAL TECNO MIG 202 LED MMA/TIG/FLUX/ALU, IGBT, Synergy. Kategorija: Pusiau automatiniai suvirinimo aparatai.

• Gamintojas: IDEAL
• Modelis: TMIG202LED MAPR-15-T
• Ilgis: 455 mm
• Plotis: 170 mm
• Aukštis: 301 mm

Manufacturer: IDEAL ║ Welding methods: MIG/MAG, TIG LIFT, MMA, FLUX ║ Power supply: 230V ║ Welding current: 200A ║ Efficiency: 60% ║ Weight: 10kg

Migomat IDEAL TECNOMIG 202 is a 3in1 device that can be used for welding using the MIG/MAG, MMA (wrapped electrode) and TIG DC (with LIFT touch ignition). In addition, thanks to the variable polarity, it is possible to weld using the FLUX powder wire without shielding gas.

• Light weight, only 10 kg.
• Handy - optimal sizes
• Great semi-automatic for workshop
• Ideal for household
• 4 welding methods : MIG/MAG, MMA, FLUX, TIG DC !
• Control SYNERGY - automatic setting.
• Welding capability: STEEL, ALUMINUM
• SOLDERING CuSi !
• Handle for easy carrying
• High quality welding machine housing
• Euro connector
• Friendly and easy to use
• Perfect semi-automatic for beginner welders
• Welding current 200A: up to 5mm melt.
• IGBT technology - less energy consumption and smaller equipment sizes!
• Suitable for use with 5kg spools!
• VRD - provides fire safety when working in a humid environment.
• 2T/4T - two modes of operation!
• 2 roller wire feeder
• Fan - proven cooling system

TECNOMIG 202 LED combines modern technology with versatility and ease of use. Its compact size, advanced safety features, and the ability to adapt to different welding methods make it an ideal choice for hobbyists and professional welders, ensuring their reliability, efficiency, and high-quality welding.

The welding machine uses IGBT transistors, which provide lower electricity consumption and significantly reduce the weight of the device. Lightweight and very compact, it can be easily transported both inside and outside buildings.

A great advantage of the welding machine is its small size (45x17x30cm), thanks to which the equipment can be used in places with difficult access. Another plus is the light weight, which is 8 kilograms. For ease of transport, the upper part of the housing has been equipped with a handle for carrying a semi-automatic.

2T/4T - when the start button is pressed, the welding process is stopped after releasing the button - when the button is pressed and released for the first time, the welding process takes place at the second press, it is a more convenient solution for longer welds.

FLUX - arc welding with powder wire, not requiring the use of gas cylinders. The wire itself is filled with flux or a chemical that produces protective gases during welding.

IGBT - the welding machine uses modern transistors, a solution that provides a minimum of electromagnetic interference small power losses in basic systems, allowing to increase the efficiency and reliability of the power source.

LUTOSPELING - allows you to combine thin and galvanized sheets. In the process, the connection is obtained by melting the appropriate binder, e.g. SG CuSi3 and the combined metals themselves do not melt.

TIG LIFT - possibility of TIG welding using a handle with a gas valve in the handle. Arching is done by rubbing, just like it is done when it comes to arcing in the MMA method.

VRD (VOLTAGE REDUCTION Device) - the function reduces the resting voltage of the idle state on the electrode to a safe value. Provides over-the-counter safety when working in humid environments.

OVERLOAD SWITCH - built-in protection against overheating of the device, prolonging its service life.

POWER SUPPLY PARAMETERS:

• Current taken from the network: 34 A
• Power supply network protection: 25 A immediate (type C)
• Rated supply voltage: 230 V; 50Hz (1ph)

TECHNICAL PARAMETERS:

• Power: 6,5 kW
• Idle voltage: 74 V
• Maximum current: 200 A - 60%
• Power at work 100%: 150 A
• Aluminum wire diameter: 0,8 - 1,0 mm
• Diameter of soldering wire: 0,8 mm
• Diameter of self-shielding wire: 0,8 - 1,0 mm
• Steel wire diameter: 0,6 - 1,0 mm
• Stainless steel wire diameter: 0,6 - 1,0 mm
• Diameter of welding electrode: 1,6 - 4,0 mm
• Welding current adjustment range: 50 -200 A (MIG) / 10 -160 A (MMA) / 10 - 200 A (TIG)

PHYSICAL PARAMETERS:

• Degree of protection: IP21S
• Weight: 10 kg
• Overall dimensions L x W x H: 455x170x300 mm

SET INCLUDES

• Welding machine Ideal TECNOMIG 202 SYNERGIC
• Welding torch MB15/3m
• Electrode cable 2,5m
• Mass cable 2,5m

ADDITIONAL ACCESSORIES:

• The welding visor MAGNUM TURBO TRUE COLOR
• Bottle with gas mixture Argon/CO2
• Reducer cylinder Ar/CO2 MINI with two pressure gauges
• Welding wire SG2 0.8 mm - 5 kg
• Preparation anti-chipping ALLWELD
• Angle magnetic 11 kg - 2 pcs
• Electrodes SkandiKraft 3,2 mm - 1 kg
• Gloves flammable for welding
• Gas hose - 2 m
• Straps clamp - 2 pcs
• Scraper for gas nozzles

+ HANDLE CONSUMABLE PARTS:

• Gas nozzles - 2 pcs
• current connectors - 2 pcs
• Ends current - 10 pcs
• Gas distributor - 2 pcs

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With VAT invoice
Parametry	Brand	IDEAL
Parametry	Supply voltage (V)	230
Parametry	Duty cycle time	40%
Parametry	Maximum electrode diameter	4 mm
Parametry	Wire diameter (mm)	0,6-1,0
Parametry	Device weight	10 kg
Parametry	Welding range	30–200 A
Parametry	Height	301 mm
Parametry	Length	455 mm
Parametry	Width	170 mm
Parametry	Length of ground cable	200 cm
Parametry	Welding cable length	300 cm
Parametry	Manufacturer code	TMIG202LED MAPR-15-T
Parametry	EAN (GTIN)	5905214998585
Parametry	Packaging status	original
Parametry	Welding methods	MIG/MAG,MMA,TIG
Parametry	Additional features	welding mask included,infinitely adjustable welding current,EURO handle,LCD display