Suvirinimo aparatas IDEAL TECNO MIG 200 PULSE LCD, MIG/TIG/MMA

Trumpai apie prekę

Prekė: Suvirinimo aparatas IDEAL TECNO MIG 200 PULSE LCD, MIG/TIG/MMA. Kategorija: Pusiau automatiniai suvirinimo aparatai.

• Gamintojas: IDEAL
• Modelis: TECNO MIG 200 PULSE LCD
• Ilgis: 510 mm
• Plotis: 230 mm
• Aukštis: 370 mm

Microprocessor-controlled semi-automatic welding machine for MIG-MAG, FLUX welding and soldering of galvanized sheets. Welding current 200A. Power supply 230V. Welding wire diameter 0,8-1,2mm. 4-roll wire feeder. MMA/TIG. Synergy.

MIGOMAT WELDING MACHINE IDEAL TECNO MIG 200 PULSE LCD SYNERGY TIG MMA

TECNOMIG 200P PULSE is an inverter synergistic semi-automatic welding machine designed for MIG/MAG, MMA, TIG Lift arc welding and soldering of galvanized sheets. The device is designed for use in professional use.

The device has three synergistic MIG/MAG welding modes: MIG, MIG PULS, MIG DOUBLE PULS. TECNOMIG 200P PULSE is used for welding aluminum and its alloys, stainless steel, carbon and low alloy steels and soldering galvanized sheets. Welding is carried out in an inert gas shield, active or mixture depending on the program selected on the control panel. Set parameters manually or choose one of 52 synergistic MIG/MAG programs for welding: AlMg, AlSi, Al99,5, CuSi3, CuAl9, 308LSi, 316LSi and FE.

Thanks to the MIG pulsation, the amount of heat introduced into the welded element is increased. It is possible to obtain a better weld, regardless of the welding position and reduce the amount of spatter. Both with the MIG method as well as the MIG PULS we have the option of selecting the button function in the handle between work in Spot mode (point welding), 2-bar and 4-bar (button lock for long welds). The welding parameters recording function (35 slots) makes it easy to work on various materials without having to re-adjust the device when changing gas and wire.

The clear and easy-to-use LCD display allows precise adjustment of MIG welding parameters such as:

- regulation of inductance

- regulation of current rise and fall (S2-bar, S4-bar)

- regulation of initial and final current

- regulation of wire burning and access

- voltage regulation at pulsation (peak)

- regulation of frequency and pulse cycle

- regulation of gas outflow time before and after welding

- regulation of point weld time (SPOT) and interval between successive welds (CSPOT)

- regulation of frequency, cycle and pulse current in TIG LIFT

The welder also has functions to facilitate the MMA welding process with a wrapped electrode:

- MMA PULSE: pulsation adjustment allows for higher weld quality and less chipping and welding dust by controlling the temperature and density of the welding current.

- ARC FORCE: short-circuit current adjustment (manual) - facilitates the transfer of a drop of molten electrode to the welded material, preventing the arc from extinguishing when the drop of electrode contacts the welding lake

- HOT START: hot start adjustment (manual) - facilitates the ignition of the electrode by providing more welding current with each arc.

- ANTI STICK: anti-short-circuit - automatically turns off the welding voltage if the electrode sticks to the welded material, which facilitates its detachment and prevents the accidental formation of a welding arc

- VRD (Voltage Reduction Device) function - reduces the resting voltage of the idle state on the electrode to a safe value. Provides shock safety when working in humid environments.

Physical parameters:

- The device has a fan cooling system which definitely increases its efficiency.

- The device is equipped with overload protection, which increases its reliability.

Power supply parameters:

- Single-phase power supply 230V

TECHNICAL DATA:

- power supply network protection: C25A,

- rated supply voltage: 230 V; 50Hz (1ph),

- power: 6,5 kW,

- idle voltage: 71 V / 13 V (VRD),

- maximum current: 200 A,

- current at 100% operation: 160 A,

- current at 60% operation: 200 A (MIG) / 180 A (TIG/MMA),

- diameter of aluminium wire: 0,8 - 1,2 mm,

- diameter of soldering wire: 0,8 mm,

- diameter of self-shielding wire: 0,8 - 1,0 mm,

- diameter of steel wire: 0,6 - 1,0 mm,

- diameter of stainless steel wire: 0,6 - 1,0 mm,

- diameter of welding electrode: 1,6 - 4,0 mm,

- welding current adjustment range: 28 - 200 A (MIG) / 16 - 200 A (MIG PULS) / 5 - 200 A (TIG/MMA),

- wire spool size: D100 (0,45kg and 1kg), D200 (2kg and 5kg),

- degree of protection: IP 23S,

- weight of the device / set: 12,5 / 16 kg,

- dimensions L x W x H: 510x230x370 mm,

- package dimensions L x W x H: 550x250x385 mm.

EQUIPMENT:

- TECNOMIG 200P PULSE,

- MIG welding torch 24 3m (armed under aluminium),

- electrode cable 2m,

- mass cable 2m,

- rollers feeding wire 1,0-1,2 to aluminium and 0,8-1,0 to steel,

- power plug.

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With VAT invoice
Parametry	Brand	IDEAL
Parametry	Power consumption	8.1 kVA
Parametry	Supply voltage (V)	230
Parametry	Duty cycle time	60%
Parametry	Maximum electrode diameter	4 mm
Parametry	Wire diameter (mm)	0,8-1,0
Parametry	Device weight	12.5 kg
Parametry	Welding range	25–200 A
Parametry	Height	370 mm
Parametry	Length	510 mm
Parametry	Width	230 mm
Parametry	Length of ground cable	200 cm
Parametry	Welding cable length	300 cm
Parametry	Product weight with unit packaging	16 kg
Parametry	Manufacturer code	Spawarka Ideal TECNO MIG 200 PULSE LCD
Parametry	EAN (GTIN)	5903991101921
Parametry	Model	TECNO MIG 200 PULSE LCD
Parametry	Welding methods	MIG/MAG,MMA,TIG
Parametry	Additional features	infinitely adjustable welding current,EURO handle,LCD display