Suvirinimo aparatas IDEAL Tecno MIG 200 Pulse LCD, 230V, 200A, TIG Lift, MMA

Trumpai apie prekę

Prekė: Suvirinimo aparatas IDEAL Tecno MIG 200 Pulse LCD, 230V, 200A, TIG Lift, MMA. Kategorija: Pusiau automatiniai suvirinimo aparatai.

• Gamintojas: IDEAL
• Modelis: TECNO MIG 200 PULSE LCD
• Ilgis: 510 mm
• Plotis: 230 mm
• Aukštis: 370 mm

• Welding methods: MIG/MAG, SYNERGY, PULSE/DUAL PULSE, TIG LIFT, MMA, SOLDERING, SPOT WELDING
• Power supply: 230V
• Operating cycle 60% at maximum welding current 200A
• SYNERGY - automatic selection of parameters (52 synergistic programs)
• For welding: stainless steel, carbon, low alloy and aluminium
• Smooth adjustment of welding parameters, inductance
• Professional, 4-roll wire feeder
• Modes and functions: 2T/4T, S2T/S4T, HOT START, ARC FORCE, VRD
• Protection against overload
• Cooling with fan
• Clean, aesthetic welds
• Made in IGBT technology

✔ FEATURES AND ADVANTAGES:

• INDUCTION REGULATION - the introduction of less heat prevents sheet deformation and damage to the zinc layer,

• LUTOSPELING - a method that uses less energy; for joining thin galvanized sheets, stainless steels, and various types of joints,

• PULS - welding of very thin elements, reducing arc linear energy and the risk of overheating/burning of materials; welds are better quality,

• SPOT WELDING - point joining of elements; allows for fast, precise, durable connections, minimizing deformation and wear of materials,

• TIG LIFT - arc glowing by rubbing the electrode against the material; used in places where there is a risk of interference of electronics by high frequency current; welds are of high quality,

• 2 TAKT - welding begins after pressing and ends after releasing the button,

• 4 TAKT - welding begins after the first press and release of the button, and ends after pressing again; more convenient with longer welds,

• S2T/S4T - regulation of current and time rise/fall (time adjustment only in S2T mode),

• HOT START - temporary increase in welding current during arc ignition; prevents "sticking of the electrode", facilitates the start of welding,

• ARC FORCE - adjustment of welding arc dynamics, allowing to adjust the depth of melting,

• ANTI-STICK - allows easy separation of the electrode from the welded material; in case of short circuit, the welding current is automatically reduced,

• VRD - reduces the voltage on the electrode to a safe level after welding,

• OVERLOAD SWITCH - protects against overvoltage, cutting off power to protect the network and device from damage,

• IGBT- bipolar transistors increase the efficiency and reliability of the device, ensure lower power consumption.

⚙ TECHNICAL SPECIFICATION:

• Power supply: 230V 50/60Hz (1ph)
• Network security: 25A “C”
• Power consumption in idle state: 44W
• Power: 6.5kW
• Welding current: MIG/MAG: 28 - 200A | MIG/MAG PULSE: 16 - 200A | TIG, MMA: 5 - 200A
• Power at work 100%: 160A
• Power at work 60%: MIG: 200A | TIG, MMA: 180A
• Idle voltage: 71V (13V for VRD)
• Aluminum wire diameter: 0.8 - 1.2 mm
• Diameter of wire for soldering: 0.8mm
• Diameter of steel/self-shielded/stainless steel wire: 0.8 - 1.0 mm
• Diameter of electrode: 1.6 - 4.0 mm
• Spools with wire: up to 5kg
• Protection rating: IP23S "H"
• Dimensions: 51 x 23 x 37 cm
• Weight: 12.3kg

THE SET INCLUDES:

• Ideal TECNO MIG 200 PULSE LCD welder,
• Welding torch MIG/MAG type MB 24 - 3m,
• mass handle - 2m,
• Electrode holder - 2m,
• Rolls for feeder wire for aluminium 1.0 - 1.2 mm,
• Rolls for feeder wire for steel 0.8 - 1.0 mm,
• User manual in Polish.

Specifications