Suvirinimo aparatas 250A 5kg inverteris MIGOMAT MIG/MAG MMA TIG su LCD ekranu

Trumpai apie prekę

Prekė: Suvirinimo aparatas 250A 5kg inverteris MIGOMAT MIG/MAG MMA TIG su LCD ekranu. Kategorija: Pusiau automatiniai suvirinimo aparatai.

• Gamintojas: Majster Pro
• Modelis: Majster MP 0114
• Ilgis: 430 mm
• Plotis: 210 mm
• Aukštis: 350 mm

⏩ Semi-automatic welding machine MP-1114

-

⭐MIG Co2/Ar ⭐ MIG Flux ⭐ MMA ⭐ TIG-LIFT ⭐ wire 0,8-1,0mm ⭐

⏩ It has the possibility of connecting Gas (connector) and welding in the Co2/Ar gas shield

-

✅ Length of welding wire (-) 2,1m MMA / MIG / TIG plug SK25 9mm with increased cross section

✅Welding wire length (+) 2,1m MMA plug SK25 9mm with increased cross-section

✅Integrated MIG cable length MB15 3m

✅ 2-roll wire feeder for rolls 5KG

⏩ 100% INVERTER MIG MAG and MMA and TIG electrode welding machine in one

►

Every even the simplest INVERTER is incomparably BETTER than even the most expensive outdated transformer

►

The inverter does not splash, does not leave "balls" , melts the material well, creates a nice weld without much welder experience after proper amperage setting

►

✅ Main advantages of INVERTERS:

• • HIGH EFFICIENCY ⭐
• • low energy consumption ⭐
• • possibility of working on extension cords and fuses 16A 20A ⭐
• • low weight ⭐
• • high quality weld ⭐
• • possibility of working with power generators ⭐
• • automatic settings and functions for improved working comfort ⭐
• • possibility of MIG MAG MMA FCAW TIG welding after using accessories ⭐

⏩ Types of welding methods MP-1114 - panel description

-

⭐MMA - Electrode welding wrapped from 1,6 -4.0mm , Weight connected to the pole (-) in the case of carbon steel,

in the case of welding with some special electrodes, the mass is connected to the pole (+) according to the manufacturer's recommendations

Synergistic presets - Knob welding current adjustment

-

Mass in most cases of this type of welding connected to the pole (+) Arching occurs by rubbing the electrode

Synergistic presets - Knob welding current adjustment, gas control with integrated handle

-

⭐ MIG Co2 - Welding with standard steel wire with a diameter of 0.8-1.0mm in a gas shield , Weight connected to the pole (-)

Synergistic presets - Knob welding current adjustment, Wire extension speed adjustment with knob

-

⭐ FLUX 0.8-1.0 - Self-shielded wire welding diameter 0.8mm-1.0mm Weight connected to the pole (+)

Synergistic presets - Knob welding current adjustment, Wire extension speed adjustment with knob

⏩ Scheme of connecting wires depending on the chosen welding method

⏩ Semi-automatic welding machine Majster PRO MP1114

✅ included:

• mass handle (-): ⭐
• electrode holder (+) ⭐
• EURO MIG / MAG handle: approx.3m ⭐
• brush with hammer ⭐
• hand mask ⭐
• welding gloves ⭐
• self-shielding welding wire 0.5kg 1.0mm ⭐

⏩The MP-1114 device is designed to work with wire up to 5kg, we can also mount self-shielding wire for the FLUX method.

✅ 2 roller feeder METAL, proven for years construction

⭐ It is intended for all kinds of welding work, in locksmith workshops, repair workshops, bodywork, farm, etc.

✅ The power source was built on IGBT LATEST GENERATION transistors ensuring minimum electromagnetic interference, small power losses in basic systems, enabling increase in efficiency and reliability of the power source, lower consumption

⏩ The welding machine works with 5 kg wire and 0.8-1.0mm diameter

The FCAW method is arc welding with core (powder) wire.

⭐ This is a welding method similar to the MIG/MAG method, except that the wire inside is filled with flux or a chemical that produces protective gases during welding.

⏩ FCAW welding combines the advantages of both wrapped electrode welding and MAG welding: very high efficiency (no need to change the electrode frequently) can also be welded outdoors (the flux also protects against weld oxidation) the welder does not have to have very high qualifications.

✅ WELDING:

⏩ Adjustment of welding parameters is carried out steplessly (smoothly), maximum welding current depends on the thickness of the wire / electrode used, welding voltage, as well as the speed of wire feeding in the case of the MIG / MAG / FCAW method. Two-roll feeder works with wire with a diameter of 0,8 / 1,0mm.

⏩ The high efficiency of the welding machine allows for welding with 200A current (for MIG / MAG / FCAW), and 250A for (TIG / MMA) in 60% of the duty cycle. The thermal switch will turn off the device if the permissible operating cycle for a given welding current is exceeded, which will prevent overheating of the welding machine.

⏩ The current parameters of the device during welding are displayed on two, very readable displays facilitating the selection of optimal operating parameters. Comfortable and very readable manipulators allow you to change welding parameters even with gloves on.

✅ Inside the welding machine there is a wire feeder that allows you to attach a spool up to 5kg.

⏩ KNOWLEDGE BASE - Technical data

⌛⚙

Brand: Majster PRO

Model: MP-1114

power supply: 230V / 50Hz ⭐

welding methods: MIG / MAG / FCAW / MMA (electrode) / TIG LIFT ⭐

welding current range: 40 - 250A ⭐

rated duty cycle: 60% ⭐

supported wire diameters: 0,8 / 1,0mm ⭐

supported electrode diameters: 2,5mm - 5.0mm ⭐

supported wire spools: max. up to 5kg ⭐

wire feeder: 2 - roller (internal) ⭐

weight of the device: 8.8kg ⭐

✅ MIG/MAG welding

consists of welding with an electric arc produced between the hot melt electrode and the welded material. The hot melt electrode is wire fed continuously. The arc and lake of liquid metal are protected by a stream of shielding gas.

Advantages:

• universal method - you can weld various metals and their alloys
• high welding efficiency - much higher than wrapped electrodes,
• Relatively low cost of welding materials
• good quality of welds

✅ FCAW

- (Flux Cored Arc Welding) - an abbreviation for the MIG/MAG (GMAW)-like welding method, except that instead of solid wire, core wire (powder) is used. If the wire is filled with powder producing protective gases during welding, the feeding of shielding gas from the outside (from the cylinder) is not required. This method is mainly used for welding responsible steel structures, pressure pipes, etc.

Advantages:

• can also be welded outdoors
• The welder does not have to be highly qualified

.

✅ MMA wrapped electrode welding

– arc welding method using a hot melt metal electrode covered with a flux sheath. The electric current produces an electric arc between the electrode and the joined metals. During welding, the sheath decomposes under the influence of high temperature, giving gaseous substances that serve as shielding gas and slag.

Advantages:

• the possibility of welding various types and grades of metals and alloys: non-alloy and alloy steels, cast iron, nickel, copper and its alloys;
• possibility of welding in any position, in field conditions
• high quality of welds, good mechanical properties;
• possibility of welding thin elements (from 1,5mm) and thick

.

✅ WELDING TIG DC

method of welding with a non-melting tungsten electrode in an inert gas shield, such as argon, helium or their mixtures Mostly. The tungsten electrode (TIG burner) is connected to the negative pole, and the mass clamp to the positive pole of the welding machine.

Advantages:

• best of all welding methods connection quality
• welding of elements with a wide range of thicknesses (the only method for welding and welding artistic details below 1 mm thick; only in impulse mode with a guide arc used for better targeting in place of the weld)

✅ EURO MIG / MAG handle: approx. 3m

.

The presented model of the welding machine has a standardized EURO socket, thanks to which we can connect any MIG/MAG welding torch that has this plug to the device.

Migomat allows welding with self-shielding wire without the need for shielding gas.

FLUX welding combines the advantages of MIG/MAG welding (wire wound on a spool, is fed using a feeder to the handle) and MMA (there is no need for shielding gas).

All trademarks and company names included in the auction are used for informational purposes only and are the sole property of these companies.

Specifications