Suvirinimo aparatas 200 inverter MIGOMAT IGBT FLUX MIG MAG MMA be dujų

Trumpai apie prekę

Prekė: Suvirinimo aparatas 200 inverter MIGOMAT IGBT FLUX MIG MAG MMA be dujų. Kategorija: Pusiau automatiniai suvirinimo aparatai.

• Gamintojas: Majster Pro
• Modelis: MP0126
• Ilgis: 450 mm
• Plotis: 275 mm
• Aukštis: 275 mm

200 inverter welder MIGOMAT IGBT FLUX MIG MAG MMA GAS WITHOUT GAS

continuing the cult solutions proven in previous generations of devices

welding methods:

Our welding machine has true parameters, not inflated as in many other devices.

not as in budget semi-automatics , fixed mount, ever-tangled wires, problem when replacing with new ones

you can weld any method, plus or minus on the welding torch

made of thick pressed sheet metal, opened on massive COMPOSITE hinges, simplicity and reliability above all

included roll supporting 2 wire thickness 0,8 -1,0mm with notching, works without slipping

for MIG/MAG welding of low-carbon structural steels, boiler and marine steels and fine-grained carbon-manganese steels in gas shielding.

Self-shielding welding wire for welding steel elements without the use of shielding gas.

The use of wire allows welding without the need for gas cylinders

Welding cables with increased length up to 1,6m, standard manufacturers supply about 1,0m max

The set includes everything you need to work: a MIG handle, MMA handles, and a self-shielding wire. When you buy our semi-automatic, you get a complete set ready to use – you can start welding right away.

Popularly called hot start, it allows by temporarily increasing the welding current above the value set by the welder. HOT START works at the moment of arcing and is designed to prevent the electrode from sticking to the material. It is a great convenience when lighting the electrode.

cuts/minimizes welding voltage and current in case of short circuit of the electrode with the welded material. ANTI STICK allows the welder to detach the electrode more easily.

stabilizes the arch regardless of its length. Regulates the dynamics of the welding arc. By reducing the value of the function, it gives a soft arc and a smaller depth of melt, while increasing the value of the function causes deeper melting and the possibility of welding with a short arc. At the highest value for the ARC FORCE function, it is possible to "press the electrode into a lake of molten metal and burn the material through

⏩ The device from the MAJSTER Pro series is a welding machine designed for welding steel in a gas shield and self-shielding wire FCAW (FLUX), MIG/MAG, MMA, as well as the TIG Lift method (this requires the purchase of an additional TIG Lift welding handle)

⭐ It is intended for all kinds of welding work, in locksmith workshops, repair workshops, bodywork, farm, etc.

✅ The power source was built on IGBT LATEST GENERATION transistors ensuring minimum electromagnetic interference, small power losses in basic systems, enabling increase in efficiency and reliability of the power source, lower consumption.

⏩ The welding machine works with 1 kg wire and 0.8-1.0mm diameter

The FCAW method is arc welding with core (powder) wire.

⭐ This is a welding method similar to the MIG/MAG method, except that the wire inside is filled with flux or a chemical that produces protective gases during welding.

⏩ FCAW welding combines the advantages of both wrapped electrode welding and MAG welding: very high efficiency (no need to change the electrode frequently) can also be welded outdoors (the flux also protects against weld oxidation) the welder does not have to have very high qualifications.

✅Technical data:

• Brand - Majster PRO
• Model MP0126
• Output current- 200A Power greater than 90% of allegro 300A
• Welding methods: MIG/MAG, MMA, FLUX - semi-automatic welding with self-shielding wire "without gas"
• Voltage - 230v 50Hz
• idle current voltage - 62V
• Wire diameter: 0.8 - 1,0 mm
• Diameter of MMA electrode - 1,6-5.0mm
• Rated duty cycle (efficiency) 60%
• Efficiency - 85%
• insulation class - IP21S
• Net/ gross weight - 8kg / 8,6kg
• dimensions - 45 / 27,5 x 27,5✅Included:
• semi-automatic MP0126
• cable with EURO mig, mig/flux handle
• MMA electrode cable
• mass cable
• shielding wire 0,45kg 0,8mm
• welding wire 1kg 0,8mm
• welding mask
• brush with hammer

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With VAT invoice
Parametry	Brand	Majster Pro
Parametry	Power consumption	200 kVA
Parametry	Supply voltage (V)	230
Parametry	Duty cycle time	60%
Parametry	Maximum electrode diameter	5 mm
Parametry	Wire diameter (mm)	0,8-1,0
Parametry	Device weight	8 kg
Parametry	Welding range	20–200 A
Parametry	Height	275 mm
Parametry	Length	450 mm
Parametry	Width	275 mm
Parametry	Length of ground cable	160 cm
Parametry	Welding cable length	160 cm
Parametry	Product weight with unit packaging	8.6 kg
Parametry	Manufacturer code	MP0126
Parametry	EAN (GTIN)	5904553383656
Parametry	Welding methods	MIG/MAG,MMA,TIG
Parametry	Additional features	welding mask included,infinitely adjustable welding current,EURO handle,EURO holders,LCD display