Stalo galąstuvas DNIPRO-M BG-15X, 250 W, 150 mm

Trumpai apie prekę

Prekė: Stalo galąstuvas DNIPRO-M BG-15X, 250 W, 150 mm. Kategorija: Diskiniai šlifuokliai.

• Gamintojas: Dnipro-M
• Modelis: 21406000
• Įtampa: 230 V

Dnipro-M BG-15X Bench Grinder

The Dnipro-M BG-15X bench grinder is a compact device for sharpening, grinding, leveling and removing burrs, sharp edges and rust from metal parts. It will work well in the garage, workshop, home workshop and during tool maintenance.

The BG-15X model operates at a speed of 2950 rpm. /min and uses two 150 mm grinding wheels with different grits: P36 for roughing and P60 for finer sharpening and finishing. Thanks to this, one device can both remove a larger layer of material and refine the working edge of the tool.

The set includes 4 protective screens, 2 spark arresters, an instruction manual and packaging, so the device is prepared for safer operation from the first start-up.

Why choose Dnipro-M BG-15X?

✓ Two 150 mm grinding wheels – rough work and more precise sharpening with one device.

✓ P36 and P60 grit - material removal and working edge finishing possible.

✓ 2950 rpm /min - stable speed for sharpening, grinding and smoothing metal parts.

✓ Asynchronous motor - simple design without commutator, easier to maintain.

✓ Copper motor windings – better durability with regular use.

✓ Thermoelectric fuse – protection against overheating and overload.

✓ Soft start – less vibration on startup and less network load.

✓ Compact design – convenient setup in a garage, small workshop or studio.

Technical Specifications

• Model: BG-15X
• Product Type: Bench Grinder
• Power Supply: Mains, 230 V / 50 Hz
• Rated Power: 150 W
• No-load Speed: 2950 RPM
• Grinding Wheel Diameter: 150 mm
• Minimum Grinding Wheel Diameter Before Replacement: 110 mm
• Grinding Wheel Bore Diameter: 32 mm
• Grinding Wheel Thickness: 16 mm
• Grinding Wheel Grit: P36 / P60
• Protection Rating: IP20
• Sound Pressure Level LpA: 82.7 dB(A)
• Sound Power Level LWA: 93.7 dB(A)
• Operating Temperature Range: -15°C to +45°C
• Features: soft start, overheat protection, spark catchers, adjustable work rests, protective shields, mounting holes for workbench
• Set Includes: BG-15X bench grinder, 4 protective shields, 2 spark catchers, safety and operating manual, packaging

Comfort, Safety, and Design

Adjustable work rests allow you to set the material feed angle to match the workpiece. This makes sharpening knives, chisels, scissors, garden tools, and small metal parts more controlled.

Metal spark catchers help direct sparks away from the operator and the work area. Polycarbonate protective shields enhance safety while allowing you to observe the grinding process.

Soft start gradually brings the grinding wheels up to full speed after switching on. This helps reduce vibration during startup and lessens sudden load on the electrical network.

Rubber feet and mounting holes improve the stability of the device on your workbench. The grinder can be used portably or secured to a benchtop using screws and nuts.

Application and safe use

The Dnipro-M BG-15X bench grinder is suitable for:

• sharpening knives, scissors, chisels and gardening tools,
• removing burrs and sharp edges from metal,
• grinding small metal parts,
• smoothing surfaces and edges,
• removing a thick layer of rust from parts,
• maintenance work in the garage and workshop,
• preparing tools for further use.

According to the manufacturer's instructions, the device should be turned off after every 30 minutes of operation to allow it to cool down. Do not grind the workpiece with the side of the grinding wheel or use excessive force when grinding.

When you buy from the official Dnipro-M manufacturer's store, you are sure to receive an original product that complies with the manufacturer's specifications and is intended for real operation.

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With VAT invoice
Parametry	Brand	Dnipro-M
Parametry	Kind	bench grinder
Parametry	Power supply type	mains
Parametry	Maximum power	250 W
Parametry	Supply voltage	230 V
Parametry	Disc diameter	150 mm
Parametry	Maximum speed	2950 RPM
Parametry	Device weight	4.6 kg
Parametry	Disc bore diameter	32 mm
Parametry	Product weight with unit packaging	5.1 kg
Parametry	Manufacturer code	21406000
Parametry	Collet diameter	16 mm
Parametry	EAN (GTIN)	4823102336343
Parametry	Plate diameter	150 mm
Parametry	Series	BG-15X
Parametry	Customs tariff code	68042218
Parametry	Batteries included	no
Parametry	Packaging status	original
Parametry	Additional information	soft start,dry sanding possible,suitable for bench mounting,shield cover,different sizes of grinding stones,interchangeable discs included