Sodo palapinė 3x2 m DAS 240 S

Trumpai apie prekę

Prekė: Sodo palapinė 3x2 m DAS 240 S. Kategorija: Pavėsinės ir palapinės.

• Gamintojas: Das Company
• Modelis: Namiot Cateringowy Pawilon Eventowy 3x2
• Ilgis: 2 m
• Plotis: 3 m
• Aukštis: 2.87 m
• Spalva: multicolor

Summer construction Summer

• Material steel galvanized
• Corrosion protection with zinc
• Diameter of structural pipes approx. 38 mm
• Thickness of structural pipes approx. 1.2 mm
• Diameter of connectors approx. 42 mm
• Thickness of connectors approx. 1.3 mm
• Mounting screws passing through
• Stable feet 6 x 9 cm

white, white-grey, white-green, white-blue, white-red

Please indicate the selected color in the message to the seller during the purchase

ATTENTION!!! If you do not choose a color, it will be selected randomly.

The design is solid and easy to assemble. Thanks to this, in addition to the quick folding, the tent can be easily moved to any place.

Our tents have an innovative entrance TYPE CURTAIN. The tarp extends to two sides. It is a convenient opening system for which ONE PERSON is enough.

Each entry is divided into two independent segments

This allows you to:

1. Extend one part of the entrance to the left.

2. Extend one part of the entrance to the right.

3. Extend the entrance both ways.

4. Get an entry with full tent width.

1 - Roof PE (polyethylene) approx. 240 g/m² 2 - Curtain type gate 3 - Strong YKK zippers at the entrances 4 - Replaceable covers 5 - PE side walls 2 x 2 m (polyethylene) approx. 240 g/m² - Mosquito net 140 x 130 cm 6 - Eyes fixing tarpaulin

It is possible to connect tents in any way. You can put them next to each other or using a special gutter - one after the other. The gutter will not only connect the tents, but also seal the tarpaulin and prevent water, dust and other dust from getting inside. Thanks to the gutter, you will gain more usable space of the tent in a safe and simple way.

Tents are composed of modules with a length of 2, 4, 6, 8, 10 or 12 m and 1, 2-meter extensions.

Innovative technology of material production

1. Polypropylene layer

2. Polyethylene mesh

3. Lacquered polypropylene layer

Lightweight but very durable fabric. Resistant to UV rays, does not fade under the influence of the sun. It has high chemical resistance and low friction coefficient. Moldproof.

ATTENTION!

The plating we use is much stronger than polyester.

The tent has grilles, mounted to the roof on Velcro. They are available in different color variants. This allows you to quickly and easily change the color of the tent.

1. Red
2. White
3. Green
4. Blue
5. Gray

Detailed information on color availability in the Delivery and Payment section

ATTENTION!

One tent may have several grille colors.

Example message to seller:

• "Please send me 10 green grilles."
• "Please send 6 green grilles, 4 red grilles (corner grilles will be red)"

Entrances and side walls (each approx. 2 m length) are separate segments mounted with special mounting rubbers - so you can create any arrangements of your tent.

Example configurations in the image:

1. Closed main entrances/entries and detached one wall in the middle of the tent.

2. Closed main entrances/entries and detached two walls in the middle of the tent.

3. Open main entrances/entries and detached all walls on one side of the tent.

4. Dismantled main entrances/entries and all tent walls.

ATTENTION!

5-6. In the picture we show that you can raise the side walls. This is not included, you can buy it at other auctions.

You can order individual plating elements in different variants:

1. Walls with windows

2. Full walls

3. Walls with mosquito net and blinds

4. Any mix of walls

Example message content to seller:

• Please send me a tent without windows.
• Please send me a tent with: 4 walls with windows and 6 walls without windows.

1 - Construction pipes fi approx. 38 mm 2 - Connectors fi approx. 42 mm 3 - Steel rope on entrances 4 - Strong screws passing through 5 - Foot 6 x 9 cm

We use the highest quality steel protected. This increases the strength of structural elements, provides protection against corrosion and guarantees long-term operation. Support pipes have a diameter of fi approx. 38 mm

Pipes have thick connectors fi approx. 42 mm. They are all galvanized, making their durability even greater.

In the upper part of the structure there are steel ropes. Thanks to them, the structure is stiffer and more stable. They also allow you to move the entrances freely.

Screws passing through were used to connect the elements in the structure. This treatment provides the greatest stability.

The stable construction of the tent is provided by feet 6 x 9 cm with anchor holes. The alloys were galvanized, which increased their durability. They ensure a solid attachment of the tent to the ground almost on any surface:

1. Earth
2. Grass
3. Stone
4. Concrete
5. Terrace tiles
6. Ankle
7. Openwork panels

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With VAT invoice
Parametry	Type	tent
Parametry	Manufacturer	Das Company
Parametry	Number of side walls	2 walls
Parametry	Color	multicolor
Parametry	Length	2 m
Parametry	Width	3 m
Parametry	Height	2.87 m
Parametry	Manufacturer code	Namiot Cateringowy Pawilon Eventowy 3x2
Parametry	EAN (GTIN)	5903425044862
Parametry	Packaging status	original