Skaitmeninis metalo ir laidų detektorius BOSCH TRUVO 2

Trumpai apie prekę

Prekė: Skaitmeninis metalo ir laidų detektorius BOSCH TRUVO 2. Kategorija: Detektoriai.

• Gamintojas: Bosch
• Modelis: 0603681221

Technical parameters:

• Detected materials

reinforcing iron, steel, ferrous and non-ferrous metals, live wires, non-voltage wires

• Max. depth of measurement (for iron and steel) up to 70 mm
• Max. depth of measurement (for copper and non-ferrous metals) up to 60 mm
• Max. depth of measurement (voltage cables) up to 50 mm
• Working time on one battery pack approx. 5 hours
• Automatic detector switch after 10 minutes of inactivity
• Power supply 3 x battery R3 (AAA)
• Weight of the device 0,15 kg
• Dimensions of the device 143 x 60 x 29 mm

The TRUVO 2 digital detector from BOSCH is a device designed to detect live wires and non-conductive wires and to detect ferrous metals (e.g. rebar) and non-ferrous (e.g. aluminum, copper, brass, etc. ).

The detector is a very safe device and incredibly easy to use. The built-in three-color LED clearly indicates whether you can drill in a given place or not. If in detection mode the LED lights up red – this means “DO NOT DRILL” when it lights up in yellow – it means that we are approaching the detected object, and when it lights up in green – it means that “YOU CAN DRILL”.

Thanks to the TRUVO 2 detector, you can work safely even in difficult conditions (e.g. with high dustiness), and in addition to a three-color large LED, the presence of hidden objects in the wall or ceiling is indicated by an audible signal.

AUTO CAL function – automatic calibration function so that the detector automatically calibrates and the work is accurate, safe and fast.

Three-color large LED (red, yellow and green) – indicates unambiguously whether it is possible to drill (green), whether the detector is approaching the desired element (yellow), whether it is not possible to drill (red), and at the same time increases work safety and facilitates operation.

Sound signal with modulated frequency – facilitates the location of the object being searched, especially useful when working in difficult construction conditions (e.g. at high dustiness), and thanks to the modulated frequency, the detector allows you to precisely determine the position of the detected object in the wall – the frequency of the sound signal increases when the meter approaches the detected object.

Auto switch function – after 10 minutes of inactivity, the detector will be automatically turned off so that the device itself takes care of the state of charge of the power batteries and allows for maximum long work on one battery pack (approx. 5 hours continuous operation).

Meter fault warning function – shows that the meter has been damaged and should be sent back to the service.

Special impact-resistant housing – the side parts of the housing have been covered with a special, soft Softgrip material, thanks to which the ergonomics of the device has been increased (the meter does not slip out of your hands) and the impact resistance has been greatly increased (e.g. when falling on hard ground).

Intuitive and very simple operation – the detector has been equipped with only 1 sliding main switch, thanks to which its operation is very simple – we turn on the meter and immediately we can start looking for objects in the wall, ceiling or floor.

Delivery includes:

• Digital detector from BOSCH
• Set of power batteries
• Instruction manual in Polish

Specifications