Robotas vejapjovė DCK, 2000 m², automatinė, su LiDAR 3D ir AiCam, be laido

Trumpai apie prekę

Prekė: Robotas vejapjovė DCK, 2000 m², automatinė, su LiDAR 3D ir AiCam, be laido. Kategorija: Robotinės vejapjovės.

• Gamintojas: DCK Tools
• Modelis: S2000

DCK Garden is a global brand that produces the highest quality garden care equipment.

The innovative DCK Terraina wireless mowing robot is fully autonomous, setting a new era in lawn care.

• Without GPS transmitters and antennas
• No virtual border wires dug in
• Without RTK station

With LiDAR 3D + AI, the Camera + VSLAM independently maps (recognizes) the garden; it navigates precisely and safely avoids obstacles.

Quick deployment in 3 steps:

• Space station placement - docking base: Choose a flat place with access to electricity and set up a charging station.
• Digital Mapping: Using the app on your smartphone, guide the robot along the boundaries of your lawn to create a 3D map of your garden.
• Ready: Set the schedule and cutting height in the app. The robot will start working on its own and return to base when energy levels drop.

Presentation of the robot: https://youtu.be/-hALA38o3-Q?si=HpH9IajtdCM3nZKk

• No border wires: Instead of time-consuming laying and burying cables, mowing limits are set virtually in the mobile application.
• Systematic, not random mowing: With LiDAR and Vision Fusion navigation, the robot plans parallel work paths. This eliminates the problem of "uncut areas" and reduces the total time needed to trim the lawn. Intelligent route planning (reduction of working time by approx. 30% compared to random robots).
• Intelligent obstacle avoidance as standard: Built-in AI camera and laser sensors allow the robot to see and avoid toys, garden furniture or trees without having to buy additional external modules (such as ACS).

• Stable operation in the shade of trees and at buildings: The robot is not dependent solely on GPS/RTK satellite signal. Laser scanning of the terrain allows it to maintain precision even under dense trees or close to high walls of the house.
• Precise edge finishing: Edge Cutting allows you to cut grass very close to the edges and walls, which significantly reduces the need for a trimmer later.
• DCK Terraina S2000 meets the biggest problem of users of old type robots – lack of predictability. Thanks to the combination of lasers and AI, the device "knows" where it is and what has already mowed, eliminating the need for daily user interventions.

Professional, fully autonomous mowing robot designed for the care of large lawns up to 2000 m². The TERRAINA S2000 operates without a limiting cable (border cable), which allows for immediate start-up without digging in the garden. With advanced laser navigation and AI vision, the robot handles complex terrain with precision avoiding obstacles.

Thanks to the advanced TERRAINA application, lawn care management becomes completely effortless. The system allows you to create precise work schedules that you can fully adapt to your daily schedule or specific garden needs. Importantly, TERRAINA robots allow you to set separate mowing days and hours for each of the defined zones

Technical data:

• Maximum mowing area: 2000 m²
• Navigation system: LiDAR 3D + VSLAM
• Obstacle detection: AI Vision + 3D LiDAR + physical bumper
• Cutting capacity: 200 m²/h
• Cutting capacity on a single charge: 630 - 650 m²
• Cutting width: 220 mm
• Cutting height 30 – 80 mm (adjustable in application)
• Number of knives on the disc: 3 pieces
• Maximum slope: 45% (24°)
• Number of supported zones: 14 zones
• Battery: 18 V / 8 Ah (Li-Ion)
• Connectivity: Wi-Fi / Bluetooth / 4G (built-in module)
• Security: PIN, Alarm, GPS module (anti-theft)
• Degree of protection: IPX5 (water jet washing resistance)
• Noise level: < 60 dB(A)
• Weight: 15,2 kg
• Working time on a single charge: 195min
• Battery charging time to full: 75min
• The battery is ok. 2000 charge cycles – long battery life up to 4 years.

Why choose this model?

• No border cable: You do not need to install the cable in the ground.
• LiDAR 3D and VSLAM technology: The robot uses laser terrain scanning (LiDAR) and a camera to build a garden map. He sees the surroundings in three dimensions, which allows him to work with an accuracy of one centimeter.
• Intelligent obstacle avoidance: The AI Vision system recognizes objects on the lawn and safely avoids them within 10 cm.
• Organized workflow: The device does not move chaotically. It mows grass at the waist, which guarantees an even appearance of the lawn and reduces working time compared to ordinary robots.
• Manage 8 zones: You can divide your garden into eight independent areas by setting different mowing parameters or schedules for each.

Key features of the robot:

• Cutting height adjustment: 30-80mm
• Mowing schedule
• Virtual borders
• Zone management
• Possibility to set height and mowing direction and schedule for a specific zone
• Graphical cut – the robot will create a symbol on your lawn as you like (e.g. Heart)
• Cutting plate to prevent blocking at work on high lawns.
• Built-in camera for real-time viewing.
• Any problems that arise during the work of the robot will be sent to the application.
• The robot communicates in Polish. Application in Polish

Modern technology:

• LiDAR 3D + VSLAM technology allows you to map your lawn without the need to install RTK or border lines, everything is done from the application level.
• VSLAM (Visual Simultaneous Localization and Mapping) technique in which the robot determines its position in space and builds a map of the environment using cameras as a data source.
• AI camera – helps the robot in the process of scanning the terrain. The robot knows where it is. Does not need GPS.
• Collision sensor built into the front of the device.
• With the TERRAINA app you can: Create a mowing schedule, edit a garden map, select operating modes, personalize mowing patterns, monitor progress in real time

TERRAINA Connect App is an application that will allow you to set mowing zones - from grass height to the days of the week in which a given area will be mowed. The advanced WIFI chip and Bluetooth allows you to control the robot anytime, anywhere.

TERRAINA has been designed in such a way as to always choose the optimal path back to the charging dock. The robot also has a rain sensor, thanks to which the return to the base takes place immediately after detecting a change in weather.

To operate the robot, install the TERRAINA application available on Google Play (Android) and AppStore (IOS)

1. 3D LiDAR, Navigation without cable. It scans the garden laser 5000 times per second to create a 3D map. You do not need to dig up the lawn under the limiting wires.

2. Mechanical bumper, Extra protection. A physical collision sensor that responds to obstacles invisible to the laser (e.g. very low edges).

3. Housing

4. Rear off-road wheels, Working on slopes. The aggressive tread provides grip on wet turf and allows you to overcome hills with an inclination of up to 45% (24°).

5. Rain sensor, grass protection. Detects precipitation and automatically directs the robot to the base. Thanks to this, the lawn is not destroyed by mowing wet blades.

6. Charging connection

7. Knives (Swing Blades), Engine Protection. 3 razor blades. In the event of an impact on the stone, they hide, which prevents damage to the motor shaft.

8. The front swivel wheels rotate 360°, allowing the robot to turn back in place and maneuver precisely in tight corners.

9. Panel with USB input for aucultivation

10. Cutting disc, Effective mulching. A special spinning design that shreds grass into natural fertilizer, powering your lawn.

11. Control panel with LED, Quick setup. It allows you to check the status of the robot or change the basic settings without having to pull out the phone.

12. STOP button, Full security. Large red button on the top of the case. One press immediately stops the knives and drive as needed.

13. Bumper

14. Main switch, Safe service. It completely shuts off the power. Necessary when replacing knives or winter storage of the device.

15. Transport handle, Convenient carrying. The ergonomic grip point makes it easy to safely lift the robot (e.g. to clean the chassis).

Service and technical support:

Ottensten Poland Sp. z o.o. as the general distributor of DCK for the Polish market, has its own warranty and post-warranty service.

We offer:

• Warranty and post-warranty service
• After-sales support
• Quick repair and diagnosis of problems.
• Remote help in installing the device in your garden!

At this year’s Warsaw Garden Expo 2026, the DCK robot from the Terraina series was awarded in the category “Innovations in garden technology”!

What you will find in the set:

• DCK TERRAINA S2000 mowing robot
• Charging station with mounting plate
• Power supply and power cord
• Set of spare cutting knives (9 pcs. ) with screws
• Cleaning brush for the device
• Mounting screws for station (anchors)
• Allen Wrench
• User manual in Polish
• Option: garage

📊 Technical data

• 📐 Maximum mowing area: 2000 m²
• 🧭 Navigation system:LiDAR 3D + VSLAM (without border cable)
• 🚧 Obstacle detection: AI Vision + LiDAR 3D + physical bumper
• ⚡ Cutting capacity: 200 m²/h
• 🔋 Efficiency on a single charge: 630 - 650 m²
• ✂ Cutting width: 220 mm
• 📏 Cutting height: 30 – 80 mm (electronic adjustment in the application)
• Number of knives on the disc: 3 pcs
• ⛰ Maximum slope: 45% (24°)
• 🗺 Number of supported zones: 14
• 🔌 Battery: 18 V / 8 Ah (Li-Ion)
• 📡 Connectivity: Wi-Fi / Bluetooth / 4G (built-in module)

🔋 Battery

• 🔋 Type: lithium-ion 8 Ah
• ⚡ Voltage: 18 V
• ⏱ Estimated working time: 195 min
• 🔌 Estimated charging time: 75 min
• ♻ Lifespan: up to 2000 cycles charging (up to 4 years of operation)

🤖 Technologies

• 🌧 Rain sensor
• 🔄 Automatic return to base
• 📱 Mobile application
• 📶 Wi-Fi
• 🔵 Bluetooth
• 📡 4G
• 🖥 LCD Display
• 📡 LiDAR 3D
• 👁 AI Vision Camera
• 🧠 VSLAM
• 🔐 PIN code, alarm, GPS module – anti-theft system

🏗 Construction

• ⚖ Weight: 15,2 kg
• 💧 Waterproof: IPX5
• 🔊 Volume: < 60 dB
• Height: 27,5 cm
• Width: 47,4 cm
• Length: 66,7 cm

📦 Contents of the pack

• 🤖 DCK TERRAINA S2000 robotic mower
• 🔌 Charging station with mounting plate
• 🔋 Power adapter and power cord
• ✂ Set of spare knives (9 pcs. ) with screws
• 🧹 Cleaning brush
• 🔩 Mounting screws for station (anchors)
• 🔧 Allen key
• 📖 User manual in Polish

FAQ - Frequently Asked Questions

1. Do I need to bury the limiting wire around the lawn?

✅ No, the TERRAINA S series is completely cableless (Wire-Free). The limits of the robot’s work are determined virtually using a mobile application, guiding the device along the edge of the lawn during the first configuration.

2. Does the robot need a GPS signal or RTK base station for navigation?

✅ No, these robots are not dependent on GPS satellite signals or external RTK transmitters, which often fail under trees or near buildings. The device uses proprietary 3D LiDAR SLAM and Vision Fusion (VSLAM) technology, thanks to which it “sees” the environment and creates dense 3D point clouds for precise positioning.

3. How does a robot deal with obstacles such as toys or animals?

✅ The robots are equipped with an intelligent OA MASTER system that combines data from LiDAR, AI cameras and collision sensors. This allows you to detect and bypass objects as high as 3 cm without having to hit them.

4. What happens when it starts to rain?

✅ The DCK TERRAINA mowing robot (both the S and E series) is equipped with an intelligent rain sensor that allows it to react autonomously to changing weather conditions. When the device detects precipitation, it automatically stops working and returns to the charging station

5. Can I wash the robot with water from a garden hose?

✅ The robot has a protection class of IPX5, which means that it is resistant to strong water jets and can safely stay outside during a downpour. Thanks to this, the bottom of the mower can also be washed directly with a garden hose

6. What is the maximum area that the S series can handle?

✅ The KDRM210 (S 1000) is designed for lawns up to 1000 m², while the KDRM220 (S 2000) will handle an area up to 2000 m². The maximum mowing capacity is about 200 m²/h.

7. How does a robot cope with hills in the garden?

✅ The TERRAINA S series has a rear-wheel drive with high grip, which allows you to efficiently overcome slopes of up to 45% (24°). Intelligent algorithms prevent wheels from rolling or bubbling on inclines.

8. Is the robot protected against theft?

✅ Yes, the device has a multi-level protection system: lock with PIN code, tracker GPS to the location of the device and association with a unique user account, which prevents its use by an unauthorized person.

9. How many zones can I divide my garden into?

✅ The S-series robots allow you to manage up to 14 separate mowing zones. For each zone, you can set an individual work schedule, cutting height and preferred driving patterns (e.g. parallel mowing).

10. Is there a robot camera preview on your phone?

✅ Yes, the application has a function in which we can connect to the camera to see exactly where our robot is located.

At our auctions, the DCK TERRAINA 1000 to 1000m2 robot is also available

Specifications