Reguliuojama gręžimo šablonas rankenėlėms, 320 mm, LARGE

Trumpai apie prekę

Prekė: Reguliuojama gręžimo šablonas rankenėlėms, 320 mm, LARGE. Kategorija: Šablonai.

• Gamintojas: no brand
• Modelis: Regulowany szablon do uchwytów 320mm

Adjustable template for drilling handles in the fronts – new on the market!

A large template that significantly speeds up and facilitates drilling holes for furniture handles. Thanks to precise adjustment of spacing and distance from the edge, drilling becomes fast, accurate and free of the risk of errors.

The most important advantages:

• Quick choice of any spacing of the handle - just screw in 2 guides → and drill right away - perfectly straight and in the axis
• Zero errors – you don’t have to measure each hole separately
• Possibility of compression immobilization for additional stability
• Possibility of selecting the distance from the edge to the millimeter or centimeter - you choose one of the two types of limiters from the set and set it your way.

Production and quality

• The drill guides are equipped with steel bushings, so that the drill practically does not wear out and is guided perfectly straight
• Standard drilling diameter is 5 mm – (it is also possible to make 4 mm, please inform us in the notes to the order)
• From the bottom, the template is protected with rubber fenders, which protect against slipping on the board, veneer or laminate.

NEW: two types of limiters to adjust the distance from the edge

1. Limit every 1 cm

You unscrew the mounting screw → you screw into the selected dimension on the scale → ready.

2. Millimeter limiter (adjustable scale)

You unscrew the screw → you set any distance by applying your measuring cup → you screw again.

REGULATION RANGE

• Maximum handle spacing: 320 mm
• Minimum distance from edge: 20 mm
• Maximum distance from edge: 120 mm
• Preview of the set distance every 1 cm on the limiter

STABILIZER – setting "to the line"

• Works from distance 60 mm – mark the center of the handle on the front and apply a template to it
• Under 60 mm – you set the template relative to the middle cutout on the template
• The extension of the middle cutout allows you to comfortably hold the template and front at the same time, even with the position firmly extended

INCLUDED:

• Template for handles
• Limiters (L+P) set every centimeter
• Limiters (L+P) set to millimeter (you use your own measuring cup to set the distance on the template)
• Middle stabilizer that shows the center to the dash
• 2x Drill guide mm (if you want 4mm - enter it in the notes to order)
• 2x Fastening screw with washer
• 3x pin locking template in drilled hole

Specifications