Pusiau automatinis suvirinimo aparatas MIG MAG MMA TIG Majster Poland

Trumpai apie prekę

Prekė: Pusiau automatinis suvirinimo aparatas MIG MAG MMA TIG Majster Poland. Kategorija: Pusiau automatiniai suvirinimo aparatai.

• Gamintojas: no brand
• Modelis: 106 K

MIG ⭐ MMA ⭐ FLUX ⭐ TIG-LIFT

Every even the simplest INVERTER is incomparably BETTER than even the most expensive outdated transformer

✅ The device from the MAJSTER POLAND series is a semi-automatic welding machine designed for manual, electric welding of steel with self-shielding wire (FCAW Flux-Cored Arc Welding method), MIG/MAG, MMA, as well as the TIG Lift method (this requires the purchase of an additional TIG Lift welding handle)

The FCAW method is arc welding with core (powder) wire.

It is a welding method similar to the MIG/MAG method, except that the wire inside is filled with flux or a chemical that produces protective gases during welding.

FCAW welding combines the advantages of both wrapped electrode welding and MAG welding: very high efficiency (no need to change the electrode frequently) can also be welded outdoors (the flux also protects against weld oxidation) the welder does not have to have very high qualifications.

It is designed for all kinds of welding work, in locksmith workshops, repair workshops, bodywork, farm, etc.

The power source was built on IGBT transistors providing a minimum of electromagnetic interference, small power losses in basic systems, enabling increase in efficiency and reliability of the power source, lower consumption

❤ Extremely attractive prices on the market, very tempting, but does the cheapest offer go hand in hand with sufficient to carry out work quality ?

Is Cheapness Quality? Where is the difference?

-

❤ When buying goods at the lowest prices on the market, remember that a small difference in price translates into a large difference in quality and service ⭐⭐⭐⭐⭐

-

✅ Quality of workmanship Majster to:

Long-lasting materials used in production , Door To Door care for full 2 years - Ppower and support for customers

The foreman thus confirms his Quality⭐⭐⭐⭐⭐

-

✅ Thoughtful, improved and gaining great popularity over the years construction, this is not a disposable ,

We are creating a budget BUT! - fully trouble-free, good quality, working well, trouble-free equipment !

• - Bulk cable ⭐
• - Electrode cable ⭐
• - Integrated MIG ⭐ handle
• - Hand mask ⭐
• - Brush with hammer ⭐

✅ + SELF-SHIELDING WIRE 0,8 MM 0,45 KG - 2 pieces

Self-shielding welding wire for welding steel elements without the use of shielding gas.

The use of wire allows welding without the need for additional shielding gas.

✅ Ready set for welding WITHOUT GAS!

.

❇ ➖ In case of MMA welding, the ground cable is connected to the ➖ ( minus ) ❇ connector

✴ ➕ To weld with self-shielded wire in the FLUX method you need to plug the mass cable into the connector ➕ (plus) ✴

TIG Lift handle is not included in the offer (to be purchased separately)

⏩ The device from the MAJSTER POLAND series is a semi-automatic welding machine designed for welding steel in a gas shield and self-shielding wire FCAW (FLUX), MIG/MAG, MMA, as well as the TIG Lift method (this requires the purchase of an additional TIG Lift welding handle)

⭐ It is intended for all kinds of welding work, in locksmith workshops, repair workshops, bodywork, farm, etc.

✅ The power source was built on IGBT LATEST GENERATION transistors ensuring minimum electromagnetic interference, small power losses in basic systems, enabling increase in efficiency and reliability of the power source, less consumption

⏩ The welding machine works with 1 kg wire and 0.8-1.0mm diameter

The FCAW method is arc welding with core (powder) wire.

⭐ This is a welding method similar to the MIG/MAG method, except that the wire inside is filled with flux or a chemical that produces protective gases during welding.

⏩ FCAW welding combines the advantages of both wrapped electrode welding and MAG welding: very high efficiency (no need to change the electrode frequently) can also be welded outdoors (the flux also protects against weld oxidation) the welder does not have to have very high qualifications.

✅ SPECIFICATION:

• Model: MP-0106
• Power greater than 90% of allegro 200A
• Real current MIG: 40-130A
• MMA real current: 20-130A
• Supply voltage: 230V
• Frequency: 50Hz
• Rated Input Capacity: 3,7KVA
• Welding methods: FLUX - semi-automatic welding with self-shielding wire "without gas"
• Electrode range: 1,6-4 mm
• Wire diameter: 0.6 - 0,8 mm
• Wire spool weight: max 1kg
• Rated welding cycle: 60%
• Working cycle: 25%
• Efficiency: 85%
• Degree of protection: IP21S
• Degree of protection: H
• Weight: 5,6kg

⏩ Welding angle / magnetic 11,5kg

PARAMETERS:

• Measuring angles: 45, 90, 135
• Lifting capacity: 11,5 kg
• Accuracy 0,5%

APPLICATION

• Installation of pipes
• Selection
• Fastening
• Soldering
• Welding

DESCRIPTION

Magnetic angle, which will allow precise and durable positioning of the material at an angle of 45, 90 or 135 degrees. It is an indispensable helper during welding or soldering, and at the same time it is cheap and reliable. The product is built of strong, high durability magnets additionally covered with a very resistant plastic shell, in a solid steel housing. It is an invaluable help in welding, assembly of metal elements, soldering, routing.

Preview color

Popularly called hot start, it allows by temporarily increasing the welding current above the value set by the welder. HOT START works at the moment of arcing and is designed to prevent the electrode from sticking to the material. It is a great convenience when lighting the electrode.

cuts/minimizes welding voltage and current in case of short circuit of the electrode with the welded material. ANTI STICK allows the welder to detach the electrode more easily.

stabilizes the arch regardless of its length. Regulates the dynamics of the welding arc. By reducing the value of the function, it gives a soft arc and a smaller depth of melt, while increasing the value of the function causes deeper melting and the possibility of welding with a short arc. At the highest value for the ARC FORCE function, it is possible to "press the electrode into a lake of molten metal and burn the material through.

.

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With VAT invoice
Parametry	Brand	no brand
Parametry	Manufacturer code	106.K
Parametry	EAN (GTIN)	5907244520330
Parametry	Model	106 K