Pusiau automatinis suvirinimo aparatas MIG/MAG, MMA, TIG Ideal 25,00-230,00 A 230 V

Trumpai apie prekę

Prekė: Pusiau automatinis suvirinimo aparatas MIG/MAG, MMA, TIG Ideal 25,00-230,00 A 230 V. Kategorija: Pusiau automatiniai suvirinimo aparatai.

• Gamintojas: IDEAL
• Modelis: EXMULTI230
• Ilgis: 795 mm
• Plotis: 220 mm
• Aukštis: 435 mm

EXPERT MULTI 230 PFC 4in1 Pro5 is an inverter, synergic and multifunctional welding source, designed for arc welding using the MIG/MAG, FLUX, TIG and TIG PULS method with alternating current (AC), constant current (DC), and the MMA method (wrapped electrode) with direct current (DC) and alternametic current (AC). The device has been designed for a wide range of applications: from maintenance work to repairing car bodies.

EXPERT MULTI 230 is used for soldering galvanized sheets, welding stainless steel, carbon and low alloy steels and aluminum. Welding is carried out in an inert gas shield, active or mixture, and with reverse polarity without gas.

The TIG DC i TIG DC PULS function is used for welding stainless steel, carbon and low alloy steels, copper and titanium.

TIG AC and TIG AC PULS: allows welding of aluminium and its alloys and brass.

By adjusting the parameters of pulse welding TIG PULS we have an impact on the shape of the weld and the focus of the arc. Pulse welding also reduces the amount of heat supplied to the material and is applicable when welding thin materials.

Arching occurs in non-contact (HF) or raised (LIFT) mode. The LIFT function is used during welding in environments with a high risk of electromagnetic interference affecting the environment.

In addition, the source has a dedicated TIG method (SMART TIG), in which the user selects the basic welding parameters sequentially. On their basis, the device selects optimal parameters of welding current or shielding gas outflow.

It also has a number of additional features, for use in special conditions. These include MIX AC/DC, MULTITACK, EXTRA FUSION, Q-START, DYNAMIC ARC and MULTIWAVE (hybrid characteristics).

With the MIG/MAG method, we can choose the button mode in the handle, between working in SPOT mode (point welding), 2-bar (without lock), 4-bar (button lock for long welds), S2-bar and S4-bar.

With the TIG method, we can choose the button function in the handle, between operation in 2-bar, 4-bar , SPOT and special PRT mode (two-level welding current).

Clear and easy to use 5-inch touch LCD display allows you to adjust welding parameters using physical buttons and knobs as well as using touch (touch screen).

The device has a manual mode (MIG MAN) and a synergic mode (MIG SYN) with the possibility of adjusting:

• gas before welding
• gas after welding
• wire access
• Wire burning
• voltage corrections
• spot welding time
• inductance
• Rising/falling current

Touch LCD display makes it easy to adjust the TIG parameters of the device:

• initial outflow of shielding gas
• initial current
• time of rising/falling current
• welding current
• base current
• final current
• pulse cycle
• pulse frequency
• AC balance
• AC frequency
• final outflow of shielding gas

MMA welding (wrapped electrode), in addition to selecting the type of current (DC or AC), is also possible with the pulse current function (PULSE) enabled. There are also additional features:

• HOT START
• HOT START time
• ARC FORCE
• VRD

The device has an extensive system of recording and reading welding parameters (JOB function). This makes it easier to work on different materials, without having to re-position the device, with any changes (e.g. gas or wire).

Physical parameters

The device has a fan cooling system which significantly increases its efficiency.

The fan cooling system - operated only if necessary - reduces contamination inside the unit.

The device is equipped with overload protection, over and undervoltage, to work with a generator (+/- 15%) which increases its reliability.

Power supply parameters

Single-phase power supply 230V.

The device is equipped with a power plug.

A1537964069)

The delivery includes a device with a MIG 24 welding handle with a length of 3 meters, TIG 26 handle with remote adjustment (potentiometer) with a length of 4 meters and an electrode and mass cable with a length of 3 meters. In addition, the set includes a hose with a quick coupler and consumable parts of the TIG 26 handle.

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With VAT invoice
Parametry	Brand	IDEAL
Parametry	Power consumption	6.6 kVA
Parametry	Supply voltage (V)	230
Parametry	Duty cycle time	60%
Parametry	Maximum electrode diameter	4 mm
Parametry	Wire diameter (mm)	0,6-1,0
Parametry	Device weight	20 kg
Parametry	Welding range	25.00–230.00 A
Parametry	Height	435 mm
Parametry	Length	795 mm
Parametry	Width	220 mm
Parametry	Length of ground cable	200 cm
Parametry	Welding cable length	200 cm
Parametry	Product weight with unit packaging	25 kg
Parametry	Manufacturer code	EXMULTI230
Parametry	EAN (GTIN)	5903991109323
Parametry	Welding methods	MIG/MAG,MMA,TIG
Parametry	Additional features	infinitely adjustable welding current,EURO handle,LCD display