Prekybinė palapinė 4x12 m DAS 580 S

Trumpai apie prekę

Prekė: Prekybinė palapinė 4x12 m DAS 580 S. Kategorija: Paviljonai ir palapinės.

• Gamintojas: Das Company
• Modelis: 1B12A14103110221221212121
• Ilgis: 12 m
• Plotis: 4 m
• Aukštis: 3.15 m
• Spalva: white

Plating MS

• PVC 4D Layer plating material
• Tarpaulin weight approx. 580 g/m²
• Temperature range from -40℃ to +60℃
• Tarpaulin attachment for strong elastic bands + Velcro
• Multi-Size system (modular roof construction)
• Hermetic system (sealing tent)
• Air-Control system (prevents condensation of water)
• Retention Apron (water drainage)
• UV resistance
• Water resistance 100%

Two entrances/entries 2.08 m wide x 2.47 m high

• Slide and Roll system (allows you to extend the input/entry to the sides or roll it up)
• Over Top system (higher input/entry than wall height)

Summer construction Summer

• Material steel galvanized
• Corrosion protection with zinc
• Diameter of structural pipes approx. 38 mm
• Diameter of connectors approx. 42 mm
• Mounting screws passing through
• Stable feet 6 x 9 cm

white, white-grey, white-green, white-blue, white-red, gray-white, gray-green, gray-blue, gray-red

Please indicate the selected color in the message to the seller during the purchase

ATTENTION!!! If you do not choose a color, it will be selected randomly.

The design is solid and easy to assemble. Thanks to this, in addition to the quick folding, the tent can be easily moved to any place.

Plating will be great for organizing any outdoor event, banquet or festival. It is an ideal protection for catering and invited guests during weddings, communions, picnics and other occasional events. It will also be used as a altana, garden tent or terrace. The tent can also be used as commercial areas and additional space in your premises.

1. New Slide & Roll system. Each of the entrances has three locks, dividing it into two independent segments, which can be expanded sideways or rolled upwards. This allowed one person to open the entrance.

2. The Over Top system increases entry. Thanks to the use of a special indentation in the roof, we obtain HIGHER ENTRY than the side wall.

Each entry has three locks, dividing it into two independent segments

This allows you to:

1. Extend one part.

2. Extend the entrance both ways.

3. Roll up one part or the whole.

4. Get an entry with full tent width.

1 - Modular roof MS PVC (polyvinyl chloride) approx. 580 g/m² 2 - Double ventilation on both sides 3 -Entry type Slide and Roll 4 - Strong YKK locks at 5 -Sealing strips 6 - Interchangeable Maskers with sealing Velcro 7 -Side walls SD PVC 2 x 2 m (polyvinyl chloride) 500 g/m² -Stained glass windows 140 x 130 cm 8 - Additional retention apron

Innovative technology of material production

1. PVC layer

2. Mesh embedded between PVC layers

3. PVC layer

4. Lacquer layer

Tarpaulin with a thick material guarantees tightness and durability. It is resistant to UV rays and temperature fluctuations. Provides water resistance and prevents water condensation. It has a low coefficient of friction and mold-resistant properties.

NOTE!

The PVC sheathing we use (polyvinyl chloride) is much stronger than polyester.

Air Control system

On both sides of the roof there are double vents with rolled shutters. This allows you to maintain proper air circulation. Thanks to this, inside the tent no sauna effect is created, and water should not condense on the walls .

Hermetic system

Each piece of plating has sewn Velcro, which ensures their optimal fit. In addition to affecting the great aesthetics, Velcro guarantees the tightness of the tent against: dust, dust or cold air.

Placed on the side walls of the additional retention apron, it ensures effective draining of water outside during rainfall. This guarantees protection against puddles in the middle of the tent.

Multi-Size System

Thanks to the Multi-Size system, it is possible to easily change the length of the tent. It can be extended by purchasing an extension kit or shortened by eliminating a given segment. Extension kits allow you to adjust the length of the tent to suit your needs.

Tents are composed of modules with a length of 2, 4, 6, 8, 10 or 12 m and 1, 2-meter extensions.

The tent has sealing grilles, mounted on Velcro. They are available in different color variants. This allows you to quickly and easily change the color of the tent.

1. Red
2. White
3. Green
4. Grey
5. Blue

Detailed information on color availability in the Delivery and Payment section

NOTE!

One tent may have several grille colors.

Example message to seller:

• "Please send me the green color grilles."
• "Please send me the grilles of color: 5 green, 4 red and 1 blue"

Entrances and side walls (each approx. 2 m length) are separate segments mounted with special mounting rubbers - so you can create any arrangements of your tent.

Example configurations in the image:

1. Closed main entrances/entries and detached one wall in the middle of the tent.

2. Closed main entrances/entries and detached two walls in the middle of the tent.

3. Open main entrances/entries and detached all walls on one side of the tent.

4. Dismantled main entrances/entries and all tent walls.

NOTE!

5-6. In the picture we show that you can raise the side walls. This is not included, you can buy it at other auctions.

You can order individual plating elements in different variants:

1. Walls with windows

2. Full walls

3. Walls with mosquito net and blinds

4. Any mix of walls

Example message content to seller:

• Please send me a tent without windows.
• Please send me a tent with: 4 walls with windows and 6 walls without windows.

1 - Construction pipes fi approx. 38 mm 2 - Connectors fi approx. 42 mm 3 - Steel rope on entrances 4 - Strong screws passing through 5 - Foot 6 x 9 cm

We use the highest quality steel protected. This increases the strength of structural elements, provides protection against corrosion and guarantees long-term operation. Support pipes have a diameter of fi approx. 38 mm

Pipes have thick connectors fi approx. 42 mm. They are all galvanized, making their durability even greater.

In the upper part of the structure there are steel ropes. Thanks to them, the structure is stiffer and more stable. They also allow you to move the entrances freely.

Screws passing through were used to connect the elements in the structure. This treatment provides the greatest stability.

The stable construction of the tent is provided by feet 6 x 9 cm with anchor holes. The alloys were galvanized, which increased their durability. They ensure a solid attachment of the tent to the ground almost on any surface:

1. Earth
2. Grass
3. Stone
4. Concrete
5. Terrace tiles
6. Cube
7. Openwork panels

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With VAT invoice
Parametry	Type	tent
Parametry	Manufacturer	Das Company
Parametry	Number of side walls	more than 8
Parametry	Color	white
Parametry	Length	12 m
Parametry	Width	4 m
Parametry	Height	3.15 m
Parametry	Manufacturer code	1B12A14103110221221212121
Parametry	EAN (GTIN)	5902426672913
Parametry	Packaging status	original