Pramoninis grindų ventiliatorius XARAM Fan 56 cm 140W XXL

Trumpai apie prekę

Prekė: Pramoninis grindų ventiliatorius XARAM Fan 56 cm 140W XXL. Kategorija: Namų ventiliatoriai.

• Gamintojas: no brand
• Modelis: XE-WOI 20/3S
• Galia: 140 W
• Svoris: 23 kg

XARAM Energy XE-WOI 20/3S is an industrial axial floor fan designed for intensive air circulation in places where an ordinary home fan is simply too weak.

Flow rate of 7200 m3/h allows you to quickly move a large mass of air in the workshop, hall, warehouse, garage, technical room or during renovation works.

The model has 3-degree airflow adjustment, steel housing, stable construction and the ability to set the blowing angle. Thanks to this, you can adjust the strength and direction of work to the current task: cooling, dehumidification, ventilation or air exchange support.

This is a practical solution for people who need equipment for demanding work, not a light fan for occasional use.

✅ Air flow 7200 m3/h → fan generates a strong airflow → effectively supports circulation in large rooms.

✅ Fan diameter 560 mm → large rotor covers a wide airflow area → moves air faster than smaller utility fans.

✅ 3-stage airflow adjustment → you can choose the intensity of the device → you can easily adjust the blower to the conditions in the hall, workshop or warehouse.

✅ Rotations 960 / 1120 / 1400 rpm → the motor operates at different speeds depending on the setting → you gain more control over the flow rate.

✅ Power 250/330 W → the device has a power reserve for industrial tasks → works well for intensive cooling, ventilation and dehumidification.

✅ Adjustable blowing angle → the air flow can be directed to the desired location → you can cool the workstation more easily or speed up the drying of a specific zone.

✅ Steel housing → construction is more resistant to working conditions than a lightweight plastic housing → the fan is better suited for workshop, warehouse and technical facilities.

✅ Protection rating IP44 → the device is protected from water splashes and foreign bodies above 1 mm → can work in more difficult conditions than a standard household fan.

✅ Stable floor design → the fan stands low and secure → easier to position where a strong point blower is needed.

✅ Weight 23 kg net → heavier construction increases stability during operation → the device does not give the impression of light, accidental equipment.

✅ Power supply 230 V / 50 Hz → the fan operates from a typical electrical network → does not require specialized industrial power supply.

✅ Air outlet 530 mm → large cross-section supports free flow → air is pushed out with a wide, strong stream.

Workshop on a hot day

In the workshop, the temperature rises quickly, especially when working with tools, machines or vehicles. XARAM XE-WOI 20/3S helps to force air movement, making the workstation more comfortable.

Production hall with air stasis

In large spaces, air often stands still, and point ventilation is not always enough. The fan with a flow rate of 7200 m3/h supports circulation and helps to exchange air faster in the selected zone.

Warehouse after unloading goods

After intensive warehouse work, opening gates and moving trolleys, the air can be heavy and heated. The floor fan allows you to direct a powerful airflow to the work zone or communication line.

Surface repair and drying

During renovation works, the acceleration of air movement helps to dry floors, walls, plasters or coatings, if technological conditions allow it. The adjustable blowing angle makes it easy to direct the stream exactly where you need it.

Technical facilities or garage

In the garage, boiler room, service room or technical room, quick air exchange often counts. The large axial fan helps improve circulation without installing a fixed duct installation.

TECHNICAL SPECIFICATION

• ✅ Brand: XARAM Energy — product brand.
• ✅ Model: XE-WOI 20/3S — industrial floor axial fan.
• ✅ Product type: industrial fan / axial blower — for strong air circulation.
• ✅ Power supply: 230 V / 50 Hz — works from a typical electrical network.
• ✅ Power: 250/330 W – enables operation in demanding ventilation tasks.
• ✅ Rotations: 960 / 1120 / 1400 rpm — 3 speed levels.
• ✅ Air supply adjustment: 3-stage — allows you to adjust the intensity of the blower.
• ✅ Air flow: 7200 m3/h — strong flow to large rooms and working areas.
• ✅ Fan diameter: 560 mm — the large rotor provides a wide airflow.
• ✅ Air outlet diameter: 530 mm — large outlet supports efficient air pumping.
• ✅ Dimensions: 668 × 230 × 660 mm — compact but massive floor construction.
• ✅ Net weight/gross weight: 23/24 kg — stable construction for technical applications.
• ✅ Protection rating: IP44 — protection against water splashes and foreign solids over 1 mm.
• ✅ Construction: steel housing – greater resistance to working conditions in the workshop and industry.
• ✅ Purpose: stationary and mobile work — for direct blowing, without flexible wires.
• ✅ Color/Variation: if applicable — according to the current product variant.

CONTENTS OF THE SET

• ✅ Industrial fan XARAM Energy XE-WOI 20/3S — the main device for circulation and air blowing.
• ✅ Floor construction with steel housing – ensures stable positioning during operation.
• ✅ Elements of airflow speed control — allow you to choose one of 3 levels of operation.
• ✅ Manufacturer’s documentation – if included, it facilitates proper operation and maintenance of the device.

TECHNICAL DETAILS AND COMPATIBILITY

The XARAM XE-WOI 20/3S fan is designed to work as a freestanding axial blower. This means that it works best for direct airflow and air circulation in an open workspace.

The device is not designed to work with flexible cables. If you need duct ventilation, you should choose equipment designed for such a system.

The model requires 230 V / 50 Hz power supply. Before starting, set the fan on a stable ground, away from loose objects that could be pulled in by the air stream.

The degree of protection IP44 increases resistance under working conditions, but does not mean full water resistance. The device should not be submerged, poured with water or used in conditions inconsistent with the manufacturer's instructions.

Due to the strong blowing and industrial nature of operation, the fan should be used in accordance with health and safety rules, especially near dust, fumes, heat sources and light materials.

ABOUT THE MANUFACTURER

XARAM Energy is a brand offering technical devices designed for intensive use in the home, garden, workshop and workspaces.

The XE-WOI 20/3S focuses on simple operation, powerful airflow and robust construction. The use of a steel housing and a large fan diameter makes the device fit the needs of users looking for equipment for demanding tasks.

When using, it is worth following the manufacturer’s documentation and safety rules for electrical and ventilation equipment.

FAQ

• Customer question: Is this fan suitable for the production hall?

Expert response: Yes, the XE-WOI 20/3S is designed for intensive air circulation in larger spaces such as halls, warehouses and workshops. The flow rate of 7200 m3/h allows you to effectively move a large mass of air.

• Customer question: Can the blowing force be adjusted?

Expert response: Yes, the fan has a 3-stage airflow adjustment. Thanks to this, you can choose the intensity of work to the current conditions and tasks.

• Customer question: Can the fan be angled?

Expert response: Yes, the device has an adjustable blowing angle. This allows you to direct the air flow to a specific zone, workstation or dehumidified surface.

• Customer question: Is the fan suitable for dehumidification?

Expert response: Yes, it can assist dehumidification by forcing air movement. It will work well when drying surfaces after renovation, washing or airing, if technological conditions allow it.

• Customer question: Can a flexible cable be connected to it?

Expert response: No, according to the given data, the product is designed to work without flexible wires. It is a fan for direct blowing and air circulation.

• Customer question: What does IP44 protection mean?

Expert response: IP44 means protection against foreign objects over 1 mm and splashes of water. However, this does not mean full water resistance, so the device should not be submerged or poured with water.

• Customer question: Is the fan heavy?

Expert response: Yes, it weighs about 23 kg net. This mass increases the stability of the device during operation, especially with a strong air stream.

• Customer question: Does it work from a regular outlet?

Expert response: The fan is powered by a voltage of 230 V / 50 Hz, i.e. according to a typical electrical network. Before use, it is worth making sure that the installation is efficient and in accordance with the requirements of the device.

• Customer question: Is it a good choice for garage or workshop?

Expert response: Yes, this is one of the typical applications of this model. The large fan diameter, steel construction and 3 levels of operation meet the workshop needs well.

• Customer question: Does the fan replace professional mechanical ventilation?

Expert response: Not always. The fan supports air circulation and exchange, but does not replace the designed ventilation system where it is required by health and safety regulations or conditions.

Specifications