Pramoninis Ethernet komutatorius su BPL, BSB618-PP-AC

Trumpai apie prekę

Prekė: Pramoninis Ethernet komutatorius su BPL, BSB618-PP-AC. Kategorija: Jungikliai ir koncentratoriai.

• Gamintojas: no brand
• Modelis: REDZ-BSB-618

BSB618-PP-AC is an industrial unmanaged Ethernet switch that enables network communication both through classic Ethernet ports and through power lines (BPL – Broadband Power Line).

The device has 7 Ethernet ports 10/100Base-T(X) and BPL interface, which enables data transmission via power cables. Thanks to this, it is possible to build network infrastructure in places where the installation of additional network cables is difficult or impossible.

The switch has been designed to work in demanding industrial conditions and is perfect for industrial automation, energy, urban infrastructure and industrial installations.

• 7 Ethernet ports 10/100Base-T(X)
• 1 BPL (Broadband Power Line)
• data transmission on energy lines
• power supply 110 – 240V AC
• Support for phase-to-phase and phase-to-neutral transmission
• Master / Slave operating mode
• automatic MDI/MDI-X
• Support for Full-Duplex / Half-Duplex
• mounting on rail DIN
• Industrial housing IP40
• wide operating temperature range -40°C to +85°C
• construction designed to work in harsh industrial environments

The device is used in:

• Industrial automation systems
• energy networks
• Smart Grid systems
• infrastructure monitoring systems
• IoT and Smart City systems
• industrial installations
• network construction where brak Ethernet infrastructure

BPL technology enables data transmission through existing power cables.

Transmission parameters

• PHY bandwidth: up to 30 Mbps
• Support for up to 10 network hops
• Support up to 1000 nodes
• up to 432 sub-carriers
• Analog band 2 to 28 MHz
• modulation of OFDM-432
• MAC CSMA/CA protocol

Security of transmission

• AES 128-bit encryption
• LDPC-C FEC error correction

Standards

• IEEE 802.3 – 10Base-T
• IEEE 802.3u – 100Base-T(X)
• IEEE 802.3x – Flow Control

Parameters

• 7 RJ45 10/100Base-T(X) ports
• automatic MDI / MDI-X
• Full-Duplex / Half-Duplex mode

Architecture

• processing method: Store-and-Forward
• MAC table: 1000 addresses
• packet buffer: 448 Kbit

The device allows you to configure the operating mode:

• Master
• Slave

The mode is selected using the switch on the device.

The device is equipped with diodes indicating the operating status:

• Power LED – power supply
• Ethernet Activity LEDs – Ethernet port activity
• BPL Activity – data transmission via BPL
• BPL Link – BPL connection status
• Master Indicator

  LED ON – Master

  LED OFF mode – Slave

  mode

The device is powered by voltage:

• 110 TO 240 V AC
• 50 – 60 Hz

The power supply is connected via the power terminal (pins 1 and 2).

The device supports several transmission modes:

PP – Phase to Phase (standard)

Transmission between phases:

• L1 – L2
• L2 – L3
• L1 – L3

PN – Phase to Neutral

Transmission between:

• phase and neutral (L-N)

DC Model

Transmission via DC line (e.g. 24V DC).

Housing: metal

Degree of protection: IP40

Dimensions:

43 × 95 × 124 mm

Weight:

approximately 400 g

Working temperature:

-40°C to +85°C

Storage temperature:

-65°C to +150°C

Moisture:

5 to 95% non-condensing

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With VAT invoice
Parametry	Manufacturer	no brand
Parametry	Product weight with unit packaging	0.4 kg
Parametry	Number of ports	8
Parametry	Number of LAN (RJ-45) ports	7
Parametry	LAN port operating standard	10/100 Mbps
Parametry	EAN (GTIN)	5905049174703
Parametry	Manufacturer code	REDZ-BSB-618
Parametry	Packaging status	original