Poliravimo rinkinys aliuminiui, metalui ir nerūdijančiam plienui

Trumpai apie prekę

Prekė: Poliravimo rinkinys aliuminiui, metalui ir nerūdijančiam plienui. Kategorija: Ratų valikliai.

• Gamintojas: Abreo

⭐ The sets include

❇ Set of polishing pastes for comprehensive polishing of aluminium

❇ 3 x felts on mandrel

❇ 2 x polishing discs - cotton for mirror polishing and flannel for shining

With our kit, you can polish your rims until you get the mirror effect. All components of the set are tested and used for many years by both professionals and enthusiasts.

⭐ Polishing is carried out in 3 phases according to. Scheme

❇ pre-polishing with A1 paste using felts

❇ polishing with A3 paste on cotton - at this stage we should achieve a satisfactory mirror effect

❇ polishing with A5 paste on flannel - strengthens the mirror and additionally shines.

Polishing pastes should be applied to the tool at revolution. Under the influence of heat emitted during friction, the paste melts and is applied to the polishing material.

⭐ Polishing paste ABGLOS GREY A1

❇ Polishing paste for pre-polishing. The abrasive of the paste includes m.in noble corundum, which thanks to its properties after pre-polishing give shine to the polished material.

❇ Application: aluminium, stainless and acid-resistant steel, carbon steel, coloured metals (m.in. silver platinum, copper), brass

❇ Consistency: hard

❇ Weight: 200g

Note - strong scratches and defects should be removed with sandpaper manually or by machine before polishing.

⭐ Polishing paste ABGLOS BLUE A-3

❇ Polishing paste for polishing. The brittle, chalky structure and composition based on the noble corundum make the paste perfect for polishing aluminum. It allows you to quickly get a high gloss.

❇ Application: aluminium, brass, copper and other non-ferrous metals, ordinary and stainless steel, silver.

❇ Consistency: hard

❇ Weight: 200g

⭐ Polishing paste ABGLOS BEIGE A-5

❇ Paste for final polisher. Gives the final shine and deepens the mirror effect. Microbeads of alumina in stearin binder enhance the shine of the surface and the mirror effect.

❇ Application: final glossing of aluminium and other non-ferrous metals, copper, brass, stainless steel and plastics. .

❇ Consistency: hard

❇ Weight: 200g

⭐ The set includes polishing tools

❇ 1x Felt on mandrel for polishing hard-to-reach places, angles and high curves. It allows you to process virtually all hard-to-reach places, including screw sockets.

❇ 2x Felt on mandrel of various sizes for polishing the first degree with the thickest grit paste

❇ 1x Cotton disc for mirror polishing

❇ 1x Flannel disc for finishing polishing, shiny.

All products are manufactured in Poland, characterized by high durability and quality much higher than imported replacements. The pastes are fresh and additionally tightly foiled do not age. Pastes are very efficient, in addition to using for rims, they can be successfully used for polishing, e.g. exhaust, stainless steel and chrome details.

We do not recommend using different polishing pastes with the same disc.

NOTE! In the case of polishing aluminum rims, the rims should be properly prepared before starting polishing work. Remove clear coat if rims are covered with it and any scratches and scuffs using e.g. abrasive papers of appropriate granulation. Inadequate preparation of the substrate results in a significant reduction in the effectiveness and efficiency of polishing works.

Specifications