Sodo palapinė 4x6 m DAS 560, įvairių spalvų

Trumpai apie prekę

Prekė: Sodo palapinė 4x6 m DAS 560, įvairių spalvų. Kategorija: Pavėsinės ir palapinės.

• Gamintojas: Das Company
• Modelis: Namioty Warsztatowe Całoroczne 4x6
• Ilgis: 6 m
• Plotis: 4 m
• Aukštis: 3.15 m
• Spalva: white

SD plating

• PVC 4D Layer plating material
• Tarpaulin weight approx. 560 g/m²
• Temperature range from -40℃ to +60℃
• Tarpaulin attachment for strong elastic bands + Velcro
• Hermetic system (sealing tent)
• Air-Control system (prevents condensation of water)
• Retention apron (water drainage)
• UV resistance
• Water resistance 100%

Two entrances/entries with a width of 1.95 m x 2.47 m height

• Slide and Roll system (allows you to extend the input/entry to the sides or roll it up)
• Over Top system (higher input/entry than wall height)

Year-round construction Winter

• Material Galvanized steel
• Corrosion protection with zinc
• Diameter of structural pipes approx. 50 mm
• Thickness of structural pipes approx. 1.6 mm
• Diameter of connectors approx. 54 mm
• Thickness of connectors approx. 1.7 mm
• Additional roof and floor construction
• Mounting screws going through
• Enlarged feet with a diameter of approx. 14 cm
• Easy-Up

white, white-grey, white-green, white-blue, white-red, gray-white, gray-green, gray-blue, gray-red

Please indicate the selected color in the message to the seller during the purchase

ATTENTION!!! If you do not choose a color, it will be selected randomly.

The construction is characterized by a solid frame made of galvanized pipes with a diameter of approx. 50 mm. The frame is easy to assemble. Thanks to this, in addition to quick unfolding, the tent can be easily moved to any place.

Plating will be great for organizing any outdoor event, banquet or festival. It is an ideal protection for catering and invited guests during weddings, communions, picnics and other occasional events. It will also be used as a altana, garden tent or terrace. The tent can also be used as commercial areas and additional space in your premises.

1. New Slide & Roll system. Each of the entrances has three locks, dividing it into two independent segments, which can be expanded sideways or rolled upwards. This allowed one person to open the entrance.

2. The Over Top system increases entry. Thanks to the use of a special indentation in the roof, we obtain HIGHER ENTRY than the side wall.

Each entry has three locks, dividing it into two independent segments

This allows you to:

1. Extend one part.

2. Extend the entrance both ways.

3. Roll up one part or the whole.

4. Get an entry with full tent width.

1 - Roof: SD PVC (Polyvinyl Chloride) 560g/m2 2 - Double ventilation on both sides 3 - Slide and Roll entrances 4 - Strong YKK zippers on entrances 5 - Sealing Velcro strips 6 - Replaceable Valances with sealing Velcro 7 - Side walls: SD PVC approx. 2 x 2 m (Polyvinyl Chloride) 500g/m2 - Stained glass style windows 140 x 130 cm 8 - Additional retention skirt

Innovative technology of material production

1. PVC layer

2. Mesh embedded between PVC layers

3. PVC layer

4. Lacquer layer

Tarpaulin with a thick material guarantees tightness and durability. It is resistant to UV rays and temperature fluctuations. Provides water resistance and prevents water condensation.

Tear strength: 2400/2300 N/5 cm

Tear strength: 250 N

Temperature range: -40°C to +60°C

NOTE!

The PVC sheathing we use (polyvinyl chloride) is much stronger than polyester.

Air Control system

On both sides of the roof there are double vents with rolled shutters. This allows you to maintain proper air circulation. Thanks to this, inside the tent no sauna effect is created, and water should not condense on the walls .

Hermetic system

Each piece of plating has sewn Velcro, which ensures their optimal fit. In addition to affecting the great aesthetics, Velcro guarantees the tightness of the tent against: dust, dust or cold air.

Placed on the side walls of the additional retention apron, it ensures effective draining of water outside during rainfall. This guarantees protection against puddles in the middle of the tent.

The tent has sealing grilles, mounted on Velcro. They are available in different color variants. This allows you to quickly and easily change the color of the tent.

1. Red
2. White
3. Green
4. Grey
5. Blue

Detailed information on color availability in the Delivery and Payment section

NOTE!

One tent may have several grille colors.

Example message to seller:

• "Please send me the green color grilles."
• "Please send me the grilles of color: 5 green, 4 red and 1 blue"

Entrances and side walls (each approx. 2 m length) are separate segments mounted with special mounting rubbers - so you can create any arrangements of your tent.

Example configurations in the image:

1. Closed main entrances/entries and detached one wall in the middle of the tent.

2. Closed main entrances/entries and detached two walls in the middle of the tent.

3. Open main entrances/entries and detached all walls on one side of the tent.

4. Dismantled main entrances/entries and all tent walls.

NOTE!

5-6. In the picture we show that you can raise the side walls. This is not included, you can buy it at other auctions.

You can order individual plating elements in different variants:

1. Walls with windows

2. Full walls

3. Walls with mosquito net and blinds

4. Any mix of walls

Example message content to seller:

• Please send me a tent without windows.
• Please send me a tent with: 4 walls with windows and 6 walls without windows"

1 - Construction pipes: approx. 50 mm diameter 2 - Construction connectors: approx. 54 mm diameter 3 - Reinforced roof structure 4 - Strong bolts passing completely through 5 - Reinforced entrances 6 - Reinforced floor structure 7 - Enlarged feet: 14 cm diameter

We use the highest quality steel protected with zinc. This increases the strength of structural elements and ensures long-term operation. Support pipes have a diameter of fi approx. 50 mm.

Pipes have thick connectors fi approx. 54 mm. They are all galvanized, making their durability even greater.

Screws passing through were used to connect the elements in the structure. This treatment provides the greatest stability.

The modular design allows you to easily increase or decrease the height of the tent. For this purpose, an additional lifting kit is used in the form of strong steel pipes with a length of 0,5m or 1m.

By buying a set you can get side of the tent with a height of 2,5m, 3m, 3,5m and 4m.

NOTE

Lifting kit available at other auctions.

Standard feet with a diameter of 9 cm have been increased by 55% to 14 cm, thus increasing the stability of the tent. The alloys have been galvanized, which has increased their durability. Each of them has three anchor holes that allow assembly of structures on almost any surface

1. Stone
2. Cube
3. Grass
4. Terrace tiles
5. Earth
6. Concrete

Anchors for fixing the tent are not included. You should stock up on them yourself and choose them according to the type of ground on which the tent will be set.

Pins included in the set are used to attach the retention apron and side tensions of the tent.

We have used two reinforcements attached with bolts, which are connected by an additional pipe in the middle. The upper, lower, and middle pipes can be easily replaced at any time. This solution provides maximum strength and practicality.

The additional construction consists of floor and roof reinforcements. Thanks to this solution, the tent is more stable and resistant to adverse weather conditions.

We replaced the two horizontal pipes at the entrances with four vertical ones connected to the roof. This allowed entry into the tent and strengthened the entire structure.

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With a VAT invoice
Parametry	Type	tent
Parametry	Manufacturer	Das Company
Parametry	Number of side walls	6 walls
Parametry	Color	white
Parametry	Length	6 m
Parametry	Width	4 m
Parametry	Height	3.15 m
Parametry	Manufacturer code	Namioty Warsztatowe Całoroczne 4x6
Parametry	EAN (GTIN)	5902426439134
Parametry	Packaging status	original