Parkavimo sistema su 8 davikliais: 4 priekyje, 4 gale

Trumpai apie prekę

Prekė: Parkavimo sistema su 8 davikliais: 4 priekyje, 4 gale. Kategorija: Vaizdo registratoriai.

• Gamintojas: no brand
• Modelis: Parking-8

4 FOR FRONT AND 4 FOR REAR

The parking sensor is a device that supports parking and reversing the car. It works on the principle of sonar - it emits ultrasonic waves, which when reflected from the obstacle allow you to determine what distance separates the car from the obstacle. Detects obstacles from as low as 2,5m showing digital distance on display. In addition, we will hear sound signaling. The closer to the obstacle, the more LEDs light up and the frequency of sound increases. Depending on which side of the car there is an obstacle - left or right LEDs light up on the display. When the reverse gear is thrown in, the display shows distance from the rear obstacle.

Front sensors activate when you press the foot brake and still watch approx. 12 sec. After he let go. If an obstacle is detected during this time - then only the information will appear on the display. The buzzer beeps 2 times at a time and silence, further signaling will only be visual. If during the wakefulness (approx. 12 seconds) no obstacle closer than 80 cm will be detected. The display will not be activated.

• Power supply: 12V (10,5V-16V)
• Power consumption: < 4W
• Power supply: 40-300mA
• The operating temperature of the device: from -40°C to +80°C
• Display operating temperature: from -20°C to +60°C
• Ultrasonic frequency of sensors: 40 KHz
• Sensor diameter: 22 mm
• Length of sensor cable: 2,5 m
• LED display cable length: 5 m
• Power cord length: 70 cm
• Display length: 10cm

Included:

• 4 black ultrasonic rear reversing sensors
• 4 black ultrasonic reversing sensors for the front
• digital-diode display
• control panel
• drill for making holes
• power beam
• installation and operation instructions in English
• box

Simple installation - limited to connecting 4 wires and making holes for sensors:

1. black cable - connect to the mass
2. red cable - connect to the cable on which +12V appears after switching on the ignition
3. white and black cable - for reversing bulb - activates rear sensors
4. white cable - from the brake bulb - activates the front sensors

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With VAT invoice
Parametry	Brand	no brand
Parametry	Model	Parking-8
Parametry	Recording quality	other
Parametry	Memory card included	none
Parametry	EAN (GTIN)	6133702507875
Parametry	Manufacturer code	CZUJNIKI PARKOWANIA
Parametry	Product weight with unit packaging	1 kg
Parametry	Batteries included	no