OBD2 diagnostikos Launch testeris CR300 DTC automobiliams

Trumpai apie prekę

Prekė: OBD2 diagnostikos Launch testeris CR300 DTC automobiliams. Kategorija: Diagnostikos testeriai ir sąsajos.

• Gamintojas: Launch
• Modelis: Launch CR300 CR3008 CR3001 3008 3001

EOBD/OBDII Diagnostic Tester

Features

• Reads and clears OBDII related error codes.
• EOBD/OBDII full diagnostics.
• Reads error codes and I/M readiness on a single touch.
• Reads vehicle's voltage output.
• Zero extra subscription fees.
• CR300 is launched in 2025.
• Comes with 9 languages, including Polish and English.
• 1.2 meters diagnostic cable with tough material.
• Supports almost all of the vehicles in EOBD/OBDII standard, i.e. petrol vehicles in 2001 and later, diesel vehicles in 2004 and later in EU.
• No batteries included, powered directly by the vehicle's OBD2 socket.
• Built-in DTC library, making it easier for you to check for relavant error codes.

Available Modes

• Mode $01：I/M Readiness, Current Data
• Mode $02：Freeze Frame Data
• Mode $03：Stored DTCs
• Mode $04：Clear DTCs / Reset
• Mode $05：Oxygen Sensor Monitoring
• Mode $06：On-Board Monitoring Test Results
• Mode $07：Pending DTCs
• Mode $08：On-Board System Control
• Mode $09：Vehicle Information
• Mode $0A：Permanent DTCs

Notice Before Purchase

• Some vehicles after 2000 still don't have the OBDII or EOBD standard, please check it out before the purchase.
• The user manual does not contain Polish language, however the device is very easy to use with no manual needed.
• No batteries included, directly powered by the vehicle's OBDII socket.
• This tester does not support non-OBDII vehicles, and does not support an adapter for non-OBDII vehicles.

Self-check Before Purchase

Make sure the similar plug shown in the picture can be plugged in to your vehicle.

compatible vehicles in general:

United States: The second-generation OBD standard, OBDII, was implemented in 1996; prior to that, the OBDI standard was used.

Europe: The second-generation OBD standard, EOBD, was implemented in 2000; prior to that, the OBDI standard was used.

Japan: The second-generation OBD standard, OBDII, was implemented in 2006; prior to that, the JOBD standard was used.

China: A standard similar to EOBD has been used since 2014.

✔ OBD2 scanner with DTC database LAUNCH -

• LAUNCH Creader 300 inherits technology collected by the LAUNCH brand for over 30 years. This error code scanner supports the ISO9141-2, ISO14230-4, SAEJ1850, ISO15765-4 protocols, and its DTC database contains all the OBD2 error codes. It is a do quick diagnostic tool on the ARM platform, which helps in diagnosing and repairing electrical faults in the vehicle.

✔ PLUG AND RUN

• LAUNCH CR300 does not require a any charger battery, just connect the diagnostic cable do of the OBD2 port of the vehicle so that LAUNCH CR300 is ready do use.

✔ COMPATIBILITY WITH OBD2 -

• LAUNCH CR300 supports OBDII/EOBD/JOBD protocols, works with vehicles with UE after 2000 (BMW, MB, V.A.G. e.t.c. ), most vehicles with USA after 1996, vehicles from Japan after 2006 and newer vehicles imported from OBD II i CAN.
• 9 languages - supports languages: German, English, French, Spanish, Italian, Portuguese, Polish, Dutch and Russian. It comes with an instruction manual to help you get started.

✔ Precise monitoring of EVAP and O2 sensor -

• LAUNCH CR300 offers advanced diagnostic features, including testing of the O2 sensor and the EVAP system. Fuel tank integrity is monitored through a leak test of the vehicle's EVAP system, and O2 sensor testing helps optimize the fuel-air mixture, improving fuel economy and reducing exhaust emissions, thereby reducing inefficient fuel consumption and protecting the environment .

✔ TURN OFF THE ENGINE LIGHT -

• The OBD-II LAUNCH CR300 diagnostic tool allows you to read and delete saved codes related to exhaust emissions, pending codes and quickly display code definitions. Turns off the MIL (Check Engine) control, helps to reset the monitor before returning the car do service and informs about the fault before returning the car do repair, saving time in the workshop.
• Please note that non-emission related check engine lights require more advanced equipment do diagnose the cause.

✔ Family of diagnostic tools LAUNCH-

• Please note that LAUNCH CR300 does not support multisystem diagnostics.
• If multiple systems need to be diagnosed, you can choose a more advanced series, such as CRP 4 System series, CRP Full System series, X431 series.

Tech Specs

• Model: LAUNCH Creader 300
• Device type: OBD2 /EOBD diagnostic tester
• Screen: Colorful LCD 1,8 inch with backlight.
• Power supply: Directly from the OBD2 socket of the vehicle (9 to 18V)
• UI language: English, French, Spanish, German, Italian, Portuguese, Russian, Polish, Dutch.
• Manual Language: English, French, Spanish, German, Italian, Russian.
• Dimensions: approx. 118 × 68 × 22 mm
• Total weight: 213g
• Connector: standard OBD2 (16-pin)
• Diagnostic cable length: 120 cm

Compatibility:

• Cars with petrol engines from 2001 year (OBD2/EOBD)
• Diesel cars from 2004 year (OBD2/EOBD)

Support for all OBD2 protocols (CAN, KWP2000, ISO9141, J1850 PWM, J1850 VPW)

What's in the Box

• Creader 300 diagnostic tester
• Quick Start Guide (in 6 languages)

Specifications