Neslystanti juosta 50 mm × 18 m, juoda, laiptams, Lenkija

Trumpai apie prekę

Prekė: Neslystanti juosta 50 mm × 18 m, juoda, laiptams, Lenkija. Kategorija: Įspėjamosios juostos.

• Gamintojas: Paper-tech
• Modelis: czarna - 18 m - 50 mm
• Ilgis: 18 m

SPECIFICATION

Non-slip tape

Glue Type: Acrylic on Solvent

Color: BLACK

Width: 50mm (5cm)

Roll length: 18 meters

Temperature resistance; from -30 degrees C to +100 degrees C

Total thickness; 0,75mm

Adhesion; 1500g/25mm

Description of the product.

The tape is ideal for wrapping stairs, railings, balconies, ramps, etc.

Very strong adhesive

Application temperature from 15 degrees C

SURFACE PREPARATION

✅ INSTALLATION CONDITIONS

1. APPLICATION TEMPERATURE: 12°C – 28°C (RECOMMENDED 15 – 22°C)

2. HUMIDITY: APPROX. 50–60%

3. AVOID INSTALLATION IN FULL SUN, IN THE RAIN, WHEN THE TAPE DOES NOT LIE 48 HOURS AT TEMPERATURE

PEACEFUL

✅ CLEANING AND DEGREASING

1. REMOVE OLD TAPES, PAINT, DUST, GREASE AND OTHER CONTAMINANTS (USE A REMOVER)

2. IF NECESSARY, LIGHTLY SAND THE SURFACE (E.G. SANDPAPER).

3. DEGREASE THE SURFACE:

IPA – RECOMMENDED FOR MOST SURFACES (METAL, GLASS, RUBBER, PLASTICS, WOOD).

ACETONE – FOR STRONG DIRT, DO NOT USE ON PLASTICS PS, ABS, PC, PMMA.

4. WIPE THE SURFACE DRY AND WAIT MIN. 30 MINUTES.

AVOID USING EXTRACTION GASOLINE, DENATURED OR NAIL POLISH REMOVER –

LEAVE A COATING THAT MAKES IT DIFFICULT TO GLUE.

--

MECHANICAL PREPARATION

REMOVE UNEVENNESS, CHIPS AND SHARP EDGES.

WITH SMOOTH SURFACES, LIGHTLY TARNISH THEM FOR BETTER GRIP.

DO NOT APPLY TAPES TO RUST, FLAKY PAINT, HOLES, GROUT OR RIVETS

TAPE APPLICATION

STEP 1 – PRELIMINARY ARRANGEMENT

DESIGNATE AN AUXILIARY LINE (E.G. WITH PENCIL OR MASKING TAPE). ABOUT 5-6MM FROM THE EDGE

DO NOT USE A STRING – IT CAN STAIN THE SURFACE.

YOU CAN GENTLY ROUND THE CORNERS OF THE TAPE SO THAT IT DOES NOT GET SQUEAMISH.

STEP 2 – OVERLAY

GRADUALLY PEEL OFF THE ADHESIVE BACKING AND STICK THE TAPE, FELT WITH A SQUEEGEE OR ROLLER, ELIMINATING

AIR BUBBLES.

AVOID TOUCHING THE ADHESIVE SURFACE WITH YOUR FINGERS.

STEP 3 – PRESSING

AFTER STICKING, PRESS THE ENTIRE LENGTH OF THE TAPE FIRMLY WITH A ROLLER OR HARD OBJECT.

THIS ENSURES MAXIMUM GRIP.

STEP 4 – SEALING ADHESIVE (FOR ANTI-SLIP TAPES)

APPLY A THIN LAYER OF SEALING ADHESIVE ONLY TO THE EDGES OF THE TAPE – NOT UNDERNEATH. (outside)

THIS WILL PROTECT THE CONNECTION AGAINST WATER INGRESS AND DIRT.

STEP 5 – CURING TIME

LEAVE THE TAPE AT REST FOR A MINIMUM OF 24 TO 48 HOURS UNTIL THE ADHESIVE IS FULLY STRONG.

AVOID CONTACT WITH WATER AND STRAIN DURING THIS TIME.

ADDITIONAL RECOMMENDATIONS

STORAGE

STORE THE ROLLS IN THEIR ORIGINAL PACKAGING, FLAT, IN A DRY PLACE, IN

ROOM TEMPERATURE, AWAY FROM THE SOURCE OF HEATING

AVOID DIRECT SUNLIGHT.

OPTIMAL TEMPERATURE: 15°C – 25°C, HUMIDITY 50%

REMOVAL OF TAPES

PEEL OFF AT AN ANGLE OF 90°, AT MEDIUM SPEED.

IF NECESSARY, HEAT THE GLUE WITH A HEAT GUN TO FACILITATE DISASSEMBLY.

USE TAPE REMOVER

ADDITIONAL SAFETY INSTRUCTIONS

DO NOT TOUCH THE GLUE WITH YOUR FINGERS, DEGREASE THE SURFACES

KEEP TOOLS AND HANDS AWAY FROM SOLVENTS.

IN PLACES EXPOSED TO MOISTURE OR HEAVY LOAD – USE SEALING ADHESIVE.

REMEMBER THAT FULL ADHESION IS ACHIEVED AFTER 48 HOURS.

DO NOT STICK ON GROUT, COLD SURFACES, ETC.

DEAR FRIENDS,

EACH STEP CONTAINED IN THE INSTRUCTIONS FOR MOUNTING ADHESIVE TAPES IS VERY IMPORTANT AND HAS A DIRECT IMPACT ON THE DURABILITY AND GLUING EFFICIENCY.

PLEASE STRICTLY FOLLOW ALL STAGES OF THE INSTRUCTIONS,EVEN

OMISSION OF ONE OF THESE STEPS CAN LEAD TO:

DECREASED ADHESION,

SHORTENING THE DURABILITY OF THE CONNECTION,

AND IN THE CASE OF NON-SLIP TAPES – TO LOSE PROPERTIES

SAFETY

Professional anti-slip tape Paper-tech Premium, ideal for:

✔ Stairs and steps

✔ Ramp and platforms

✔ Balustrades, ceramic edges

✔ Warehouses and production halls, houses

🔎 Most important features:

• Width: 50 mm
• Length: 18 m
• colour: black
• strong adhesive
• Durable and resistant to abrasion

👌 Advantages:

• increases grip and safety
• quick installation without tools
• ideal for indoor and industrial applications

➡ Buy now and improve your security today!

• Condition: New
• Invoice: VAT
• Color: Black
• Width: 50 mm
• Length: 18 m
• Application: OHS / non-slip
• Brand: Paper-tech

According to the guidelines of ISO 21542, the best solution for contrast determination of external steps is the use of vinyl tape or anti-slip tape – the choice of the type of tape depends on which aspect the customer cares about the most (aesthetics or increase in anti-slip properties).

Attached are illustrative photos showing:

• example of marking degrees with vinyl tape,
• example of marking degrees with non-slip tape.

The width of the markings should be selected in accordance with the requirements of the standard:

• tape with a width of 10 cm – in the case of marking only first and last degree in the run,
• tape with a width of 5 cm – in the case of marking of each degree.

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With VAT invoice
Parametry	Product weight with unit packaging	0.7 kg
Parametry	Length	18 m
Parametry	Tape width	5 cm
Parametry	Manufacturer code	czarna - 18 m - 50 mm
Parametry	Additional information	non-slip tape
Parametry	EAN (GTIN)	5905054230104
Parametry	Brand	Paper-tech
Parametry	Packaging status	original