Litavimo stotelė HOTAIR 858D II su oro pūtikliu, 5 antgalių rinkiniu ir SMT griebtuvu

Trumpai apie prekę

Prekė: Litavimo stotelė HOTAIR 858D II su oro pūtikliu, 5 antgalių rinkiniu ir SMT griebtuvu. Kategorija: Lituokliai.

• Gamintojas: Hotair
• Modelis: 858D II
• Galia: 700 W
• Įtampa: 230 V

Other 858D manufacturers have other nozzles without gaps!!!! Their soldering irons do not work in every position of the flask

By buying from us at HOTAIR Robert Mazurek you can be sure of the guarantee and quality of the products sold. We have been operating since 2011

✅ Possible operation of the flask in any position ⚡

✅ Cult refined design without defects guaranteeing reliability ⚡

✅ Slotted nozzles allowing minimal blowing of this do not have other 858D II ⚡

✅Precision thanks to slotted nozzle flask design

✅ The largest selection of nozzles - the most popular on the market

✅ Hot Air temperature control: 100 - 480°C ⚡

✅ Automatic cooling of the flask after putting it down

✅ Increased efficiency of the hot air flask up to 120L thanks to the fan ⚡

✅ Quieter operation due to the fan placed in the flask

✅ Smd gripper included

✅ Temperature calibration

The HOTAIR 858D II soldering station with LED display, offering real temperature indications at 700W. Equipped with a gripper for SMD chips, it is recognized as the best hot air device on the market, enjoying the iconic quality and popularity. It is distinguished from third-party devices by high security.

Here you will also find soldering accessories such as chemicals, mats, fluxes, pastes and handles that will facilitate work and provide professional results.

The HOTAIR 858D II soldering station is designed to meet the high demands of electronic service. It has a smooth air blowing control up to 120L/min and a wide temperature control range from 100°C to 500°C. Thanks to this, it can be soldered electronic components as well as used for welding plastic.

Operation of the soldering station is simple and intuitive thanks to the easy-to-read control panel. On the easy-to-read LED display, you can see the set temperature, and after a while also the actual temperature. The knob allows you to quickly set the blowing power, while the buttons allow you to adjust the temperature with precision.

The soldering flask is equipped with a brushless fan with a soft start and high durability, which provides blowing power up to 120 L/min and high reliability.

In the flask there is a heating element on a ceramic skeleton, built of thick wire covered with mica, which protects against accidental short circuit with the housing. The heater with a power of 700 W guarantees instant heating to the set temperature, enabling efficient work with electronic components and comfortable welding of plastics.

The Hot air flask has a standard outlet size of 22 mm, which provides a large selection of solder nozzles available on the market.

These nozzles fit models: Aoyue, PT, Hakko, Sunnko and many others. At our other auctions, you can buy as many as 80 types of solder nozzles, including BGA, PLCC, SIP, SOP, QFP nozzles and plastic welding nozzles such as BUT, Iron, Super Nozzle and many more.

The nozzles in our station are distinguished by a gap, which allows the removal of excess reversing air, especially at high temperatures and low airflow. This solution significantly extends the life of the heating element and prevents overheating, which is rarely found in other manufacturers.

Included with the soldering station are interchangeable nozzles with a gap:

• Round nozzle 5 mm: for precise operations requiring concentrated heating.
• Round nozzle 8 mm: for precise operations requiring concentrated heating.
• Round nozzle 10 mm: for larger areas where even heating is needed.
• Square nozzle 12x12 mm: for BGA systems.
• Super Nozzle 1142D for working in hard-to-reach places.

The soldering station HOTAIR 858D II is characterized by:

• Flask for hot air
• LED Display
• Power Consumption: 700W
• Temperature control in the range of 100°C - 480°C
• Smooth regulation of air exhaust, digitally controlled.
• Air flow regulation up to 120 l/min max.
• Strong heater made of thick wire (distinguished by greater strength and durability of the heating element)
• Fast reaching of the set temperature and high stability of the operating temperature.
• Blowing type: brushless fan with soft start, characterized by high durability and reliability, quiet operation and minimal vibration.
• A microcontact is placed in the holder for the hot air flask, which when the flask is put away causes it to go into a waiting state. Thanks to this solution, the life of the heater is extended, the air supply is turned off or reduced, which leads to energy savings.

Temperature correction function: When using a soldering station, the value of the set temperature may vary, which is a natural phenomenon depending on many factors, such as ambient temperature, wear of the heating element or type of nozzle. Therefore, the soldering iron is equipped with digital temperature correction, which allows for trouble-free soldering. The calibration procedure is quick and easy.

Handle Needle Tweezers Lift for Service

Useful tool for:

• Deleting IC elements
• Lifting small objects, BGA systems, integrated circuits
• Dismantling of SMD systems
• Precise work in places inaccessible to classic tweezers
• Lifting hot elements
• Transferring and placing circuits on PCBs
• Soldering and desoldering

Technical specification:

• Overall length: 143 mm (±2 mm)
• Grip length: 51 mm (±2 mm)
• Grip width: 29 mm (±2 mm)
• Handle diameter: 1 cm (±1 mm)
• Made of: antistatic plastic

The offered set consists of the following elements:

• Soldering station HOTAIR 858D II
• Holder for flask,
• A set of 5 nozzles:
• round with a diameter of 5 mm
• round with a diameter of 8 mm
• round with a diameter of 10 mm
• square with a size of 12x12 mm
• + Super nozzle
• Handle for lifting IC systems,
• Instruction manual in Polish.

HOTAIR858D-II

Specifications