Laikrodžių taisymo įrankių rinkinys, 13 dalių dėklas

Trumpai apie prekę

Prekė: Laikrodžių taisymo įrankių rinkinys, 13 dalių dėklas. Kategorija: Įrankių rinkiniai.

• Gamintojas: no brand
• Modelis: SERWIS BRANSOLET DEKLI TELESKOPÓW

⌚ Perform basic watch repairs and adjustments yourself

🔧 Tools for opening case backs, shortening watch bands, and replacing spring bars

🧰 All tools organized in a compact case

You no longer need to take your watch to a service center every time you want to shorten a metal band, remove the case back, replace a spring bar, or make a minor adjustment.

This set includes tools designed for basic work on watches, jewelry, and small electronic components. It's suitable for both DIY repairs at home and as an addition to a workshop.

Thanks to the closable case, each tool has its own place, making it easy to store, transport, and protect your tools from getting lost.

✔ Complete set of 13 elements

✔ 18 interchangeable tips for rotary opener

✔ Tools for opening watch cases

✔ Metal Bracelet Shortening Tool

✔ Three punches of different diameters

✔ Removal and insertion of telescopes

✔ Adjustable watch stabilizing holder

✔ Precision tweezers and flat screwdrivers

✔ Compact storage case

✔ Home and workshop use

⛔ Attempting to open the watch with accidental tools can lead to scratching the case, damaging the case or bending the bracelet elements.

✅ The set includes tools tailored to the most frequently performed watchmaking activities:

• • opening of screw-ons
• • challenging of push-in Decks
• • shortening of metal bracelets
• • punching pins and pins
• • removal of telescopes
• • unscrewing small screws
• • holding small items

This allows you to carry out minor repairs or adjustments more conveniently and precisely without the use of accidental accessories.

🔩 The rotary opener is designed for watch bottoms closed with screws or equipped with appropriate notches.

The opener comes with 18 interchangeable tips that allow you to adjust the tool to different types of decals.

The adjustable design makes it easy to set the right spacing for your tips, while the handle allows for controlled rotation of the deck.

Before starting work, make sure that the tips have been properly adjusted to the incisions and do not slide over the surface of the watch.

🛠 Adjustable imak helps to immobilize the envelope during repair.

Stable setting of the watch:

• facilitates precise tool handling

• limits the envelope from sliding

• increases control when unscrewing the Decal

• helps protect your watch from accidental dropping

The holder is designed for watches with a maximum case diameter of 3,6 cm.

⌚ Too loose bracelet can slide over the wrist, and too tight cause discomfort when wearing.

The set includes a bracelet shortening device and three punches:

• 0,70 mm

• 0,80 mm

• 1,00 mm

Different diameters allow you to better adjust the tool to the size of the shank or pin used in the bracelet.

Before starting the breakout, check the direction of removal of the stem and the method of connecting the cells used by the watch manufacturer.

🔗 The telescope device makes it easy to remove the strap or bracelet from the watch case.

The tool can be used during:

• bar replacement

• replacement of metal bracelet

• planting a new telescope

• cleaning the space between the strap and the envelope

• doing minor maintenance work

Properly shaped tip makes it easy to press the spring-loaded telescope.

🔍 Watches contain small screws, pins and elements that are difficult to hold with your fingers.

The precision tweezers with a pointed tip make it easy to:

• capture small parts

• setting screws and pins

• removal of small elements

• work in hard-to-reach places

The set also includes three flat screwdrivers with interchangeable tips, designed to work with small screws.

🔪 The dekla prying knife can be used for watches equipped with an appropriate place to insert the blade.

The thin tip allows you to gradually pry the lid without using large, mismatched tools.

The knife is sharp and requires special care. Do not point the blade towards your hand or anyone else.

Before starting work, check whether the lid is pressed. The tool is not intended for unscrewing screw-on Decks.

🧰 All components of the set can be stored in the included case.

Each tool has a designated place, which helps to:

• keep order

• quickly find the item you need

• reduce the risk of losing tips

• safely transport the set

• protect tools from accidental damage

The compact format allows you to store the set, among others, in a drawer, cabinet, toolbox or workshop equipment.

👤 The kit can be used by both people starting self-repair and more experienced users.

It will work as an equipment:

• home workshop

• watchmaking studio

• strap and battery replacement point

• small electronics service

• jewelry studio

• do-it-yourselfer kit

The tools can also be used during selected small works related to jewelry and small electronic components, provided that the tool is properly adjusted.

The set is designed for many types of wristwatches, however, the possibility of using individual tools depends on the design of a particular watch.

✔ Maximum declared diameter of the envelope supported by the attached imak: 3,6 cm

✔ Rotary opener: for decals equipped with appropriate notches or mounting points

✔ Knife: for selected press-in plates

✔ Shortening device: for compatible bracelets connected by shanks

✔ Telescope device: for straps and bracelets mounted with telescopes

Before use, check the method of closing the case and the design of the bracelet. Not all watches use identical mounting solutions.

1. Spread the case on a stable, well-lit surface.

2. Check the design of the watch and choose the right tool.

3. Protect the envelope and glass from scratches.

4. If necessary, place the watch in an adjustable imaku.

5. Adjust the tip or punch size to the item being repaired.

6. Work slowly, without using excessive force.

7. When finished, check the correct attachment of all elements.

8. Clean the tools and place them in the designated places in the case.

In the absence of experience or doubt about the design of the watch, it is recommended to use the services of a professional watchmaker.

Product type: watchmaking tool set

Number of items included: 13

Number of opener tips: 18

Maximum diameter of envelope supported by imak: 3,6 cm

Case dimensions according to specifications: 21 × 10 × 5 cm

Weight of the set according to specifications: 0,484 kg

Weight with packaging according to descriptive specification: 0,51 kg

Product dimensions with packaging according to technical data: 23 × 11 × 5,5 cm

Weight with packaging according to technical data: 0,53 kg

✔ Adjustable key – adjustable rotary opener for decals

✔ 18 rotary opener tips

✔ Adjustable watch mount

✔ Punch for bracelet 0,70 mm

✔ Punch for bracelet 0,80 mm

✔ Punch for bracelet 1,00 mm

✔ Precision tweezers with pointed tip

✔ Three flat screwdrivers with interchangeable tips

✔ Removal device for telescopes

✔ Bangle shortening device

✔ Scissor for prying the Decks

✔ Storage case

Is the set suitable for shortening the bracelet yourself?

Yes. The set includes a device for shortening bracelets and three punches with diameters of 0,70 mm, 0,80 mm and 1,00 mm. Before starting work, check the design of the bracelet and the direction of removal of the stem.

Does the set allow you to open the watch face?

Yes. The set includes an adjustable rotary opener with 18 tips and a scissor for prying selected press-in plates. The tool should be selected for the type of closure.

Does the set fit every watch?

Compatibility with all models cannot be guaranteed. Applicability depends on the diameter of the case, the type of case, the design of the bracelet and how the strap is attached.

What is the maximum size of the envelope supported by imak?

According to the specifications, the holder is designed for watches with a maximum case diameter of 3,6 cm.

Does the kit include a belt replacement tool?

Yes. The set includes a telescope removal device, which makes it easy to remove and install compatible straps and bracelets.

Are the tools supplied in the case?

Yes. The whole set comes in a resealable case, which makes it easy to store and transport your tools.

Is the set suitable as a gift?

Yes. A practical set in a compact case can be a good choice for a watch lover, DIYer or a person doing minor repairs.

Is the set suitable for a beginner?

Yes, however, tools require caution, proper fit and familiarization with the design of the repaired watch. Incorrect use can damage the case, caseback or bracelet.

Does the kit include a hammer?

No. The hammer is not listed in the contents of the set.

Is the kit used to replace batteries?

The kit can make it easier to open a compatible Decal, however, the battery, gaskets and measuring instruments have not been listed as part of the kit.

⌚ Shorten the bracelet, replace the strap or open the compatible caseback without using random tools.

🧰 Choose an extensive set of 13 items, stored in a convenient case.

🔧 Prepare your home workshop for basic watch repairs and adjustments.

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With VAT invoice
Parametry	Brand	no brand
Parametry	Manufacturer code	SERWIS BRANSOLET DEKLI TELESKOPÓW
Parametry	Product weight with unit packaging	0.51 kg
Parametry	EAN (GTIN)	5904012524033
Parametry	Number of items in the set	13
Parametry	Packaging status	original