Klijai PVC SUP lentoms, baseinams, pontonams, tentams, batams PU-312, 330 g

Trumpai apie prekę

Prekė: Klijai PVC SUP lentoms, baseinams, pontonams, tentams, batams PU-312, 330 g. Kategorija: Priedai.

• Gamintojas: no brand
• Modelis: PU312
• Svoris: 0.33 kg

Polyurethane Professional PU312 330g adhesive for PVC pool inflatable boat, for repairing and modifying inflatables, SUP boards, trampolines, etc.

This glue is used in the manufacture of inflatables at factories and is recommended for sticking various handles and accessories to the inflatable. Designed for quick and reliable repair of PVC products that are used outdoors. In sea or fresh water. Resistant to UV rays.

date of manufacture on cap: date of manufacture 06/2025; expiry date up to 06/2026

Glue designed for bonding PVC materials (pigots, tarpaulins, tents, swimming pools and others), leather, polyurethanes, rubber, wood and other porous materials (roof membrane).

Recommended for quick and qualitative repair in both tourist and home conditions:

• PVC material inflatables
• sticking accessories and slats to strengthen the bottom of the pontoon
• SUP boards
• trampolines
• tarpaulins
• Commercial pavilions
• pumped and expansion pools
• Inflatables for the Playground
• tourist tents, kayaks, canoes, catamarans and sports and tourist footwear

Cold gluing method:

1. Mark the spot under the patch. Cut a patch of fabric or PVC film in a size that is 4-5 cm larger than the place of damage.
2. Clean and degrease the patch and the place under the patch.
3. Apply a thin layer of glue to both surfaces to be glued.
4. Dehumidify 5-10 minutes. Apply a second layer of glue and dry for 3-5 minutes. It is important to correctly determine the moment when the adhesive viscosity begins to disappear (check without touching the finger), put the patch in place and press firmly. We recommend leaving the gluing place under pressure for 3-4h. Glued equipment can be used after 3-4h.

Hot bonding method (WE RECOMMEND):

When hot glueing, we increase temperature resistance and it will no longer be tearable :) Even a hair dryer is enough to heat it

1. Mark the spot under the patch. Cut a patch of fabric or PVC film in a size that is 4-5 cm larger than the place of damage.
2. Clean and degrease the patch and the place under the patch.
3. Apply a thin layer of glue to both surfaces to be glued.
4. Dehumidify 5-10 minutes. Apply a second layer of glue and dry5-10 minutes.
5. Preheat the glued surfaces to 60 °С, place the patch in place and press firmly. Glued equipment can be used after 20 minutes.

Recommendation and recommendations:

Cuts and damage greater than 4 cm glue on both sides. Cuts and damages over 6 cm in length are recommended to be repaired in specialized workshops. Operating temperature of glued equipment from – 40 °С to +80 °С. Repair at temperatures greater than 10 °С. Store and transport at temperatures from – 10 °С to + 30 °С. Fresh glue is removed with spirit or acetone. The maximum effect is achieved after 24 hours. FLAMMABLE ATTENTION! Keep out of reach of children. Work should be carried out in a ventilated room and avoid access to fire.

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With VAT invoice
Parametry	Manufacturer code	Glue PU312 330gr
Parametry	Model	PU312
Parametry	Brand	no brand
Parametry	Kind	repair accessory
Parametry	For	pontoons and boats
Parametry	Weight	0.33 kg