Keraminė danga GTechniq C1, 30 ml

Trumpai apie prekę

Prekė: Keraminė danga GTechniq C1, 30 ml. Kategorija: Keraminės ir kvarcinės dangos.

• Gamintojas: Gtechniq

GTechniq C1 30ml

G-Techniq

C1 is an ideal product for all those who want to have permanent protection of the car's paint for years and at the same time reduce the formation of micro-scratches, resulting from the softness of the paint or errors in washing and maintenance of the vehicle. You do not have to be a professional detailer to get body protection effects similar to professional ones.

The C1 coating permanently binds to the lacquer to form a smooth surface. This makes it easier to wash the vehicle, increases the gloss and resistance of the paint to UV radiation. An additional barrier between the varnish and weather conditions ensures that the protected vehicle retains its shine for longer.

C1 is a coating for which we recommend using an additional EXO layer. It is responsible for the maximum hydrophobic effect and self-cleaning of the varnish.

Key features:

• paint protection for over 3 years
• ease of self-application
• reduces the formation of circular micro-scratches
• facilitates vehicle care
• increases the gloss of the varnish

Which capacity to choose?

• 30ml - recommended for cars with dimensions Audi A6, BMW 5, Mercedes E-Class or smaller
• 50ml - is recommended for cars with dimensions larger than Audi A6, BMW 5, Mercedes E-Class
• 250ml - large-size non-standard vehicles (aircraft, boats, tractors)

Product storage:

• Once opened, store the bottle in a dry and cool place away from direct sunlight
• Use within three months of opening

The box contains:

• 30ml coating C1
• pair of nitrile gloves
• swab applicator
• application instructions

Storage and method of application:

• Make sure the surface is cold, dry and not exposed to direct sunlight
• Always wear gloves during application to avoid contact with the skin
• Apply the product to the applicator
• Turn off the bottle and set aside, do not hold it in your hand as this may speed up the crystallization of the product
• Change the applicator after 3-4 uses, on surfaces no larger than half of the car hood. If you do not do this, you will feel that the coatingbecomes blunt and it will be very difficult to reach it
• The coating enters with the protected surface into an immediate reaction. The reaction speed depends on the temperature and vibrancy - at normal temperature and humidity about 50% we recommend polishing between 30-60 seconds after application
• You may need to re-polish to remove excess. We recommend using two fibers. Note that you are only collecting excess
• Avoid pressure when polishing, as this may cause scratches and remove the product
• Pay attention to translate MF1 pages so as not to "clog" its C1, otherwise there may be problems with the product reaching
• If you omit an element and do not remove the excess, polish the element and repeat the application C1
• As soon as you are done, put the fibers in the water and then wash them, otherwise C1 will crystallize on MF1 fibers
• Remaining coating without contact with water for at least 12 hours
• Use C1 Crystal Lacquer within one year of purchase and within 3 months of opening

• Capacity: 30ML

Scratch-resistant coating

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With VAT invoice
Parametry	Manufacturer	Gtechniq
Parametry	Manufacturer's catalog number	421
Parametry	EAN (GTIN)	5060147721140