Kampinis šlifuoklis DNIPRO-M GL-280 230mm 2800W 6500 aps./min

Trumpai apie prekę

Prekė: Kampinis šlifuoklis DNIPRO-M GL-280 230mm 2800W 6500 aps./min. Kategorija: Kampiniai šlifuokliai.

• Gamintojas: Dnipro-M
• Modelis: 80590000
• Įtampa: 230 V

Angle grinder Dnipro-M GL-280

Dnipro-M GL-280 is a powerful large angle grinder for cutting and grinding metal, concrete, stone, brick, ceramics and other building materials. It will work well for heavier renovation, assembly, workshop and construction works.

The model has a nominal power of 2600 W, working power of 2800 W, dial 230 mm, speed 6500 rpm /min and spindle thread M14. The large diameter of the disc allows you to make deeper cuts than in 125 mm grinders, and Soft Start reduces a sharp at start-up.

The set includes an angle grinder GL-280 with flange, nut and cover, side handle, disc wrench, hex key, spare set of graphite brushes, user manual and packaging.

Why choose Dnipro-M GL-280?

✓ Power 2600 W / working 2800 W for demanding cutting and grinding

✓ 230 mm shield allows you to make deep cuts in metal and building materials

✓ Maximum power of 3200 W gives stock at higher load

✓ Soft Start reduces when starting a large grinder

✓ Protection against re-engagement increases safety after power failure

✓ Side grip mounted in 3 positions improves control over the tool

✓ 3 m cable gives a more comfortable working range

✓ Spare set of brushes included facilitates the subsequent operation of the tool

Technical data

• Model: GL-280
• Type: Angle Grinder
• Power Supply: Mains
• Voltage: 230 V
• Frequency: 50 Hz
• Rated Power: 2600 W
• Working power: 2800 W
• Maximum power: 3200 W
• Rotation speed: 6500 rpm /min
• Disc diameter: 230 mm
• Disc hole diameter: 22,23 mm
• Spindle Thread: M14
• Spindle length: 21 mm
• Rotation adjustment: no
• Constant rotational speed: no
• Smooth start: yes
• Protection against re-engagement: yes
• Protection against accidental start-up: yes
• Rotating main handle: no
• Side handle: yes
• Cable length: 3 m
• Degree of protection: IP20
• Protection Class: II
• Working weight: 6,4 kg with grinding disc

Functions: cutting, grinding, surface cleaning, working with a 230 mm disc, smooth start, protection against restarting, lock accidental switching on, spindle lock, installation of a side handle.

Set: angle grinder Dnipro-M GL-280 with flange, nut and protective cover, side handle, disc replacement wrench, hex key, spare set of graphite brushes, user manual, packaging.

Power, 230mm disc and deep cutting

GL-280 is the most powerful variant of this series of large Dnipro-M grinders. The rated power of 2600 W and the working power of 2800 W help maintain productivity when cutting metal, concrete, stone and structural elements.

The 230 mm disc will work where the small 125 mm grinder has too little cutting depth. The model can be used to work with profiles, pipes, rods, sheet metal, brick, concrete, stone, ceramics and building blocks.

Speed 6500 rpm /min is suitable for large 230 mm discs. The M14 thread and the 22,23 mm disc hole correspond to the standard attachments for large angle grinders.

Constant rotation speed and rotation adjustment are not available in this model, so during intensive cutting it is worth choosing the right disc, stably guide the tool and do not press it excessively to the material.

Safety, grip and ease of use

Soft Start reduces the sudden when turned on. This is especially important with a large 230 mm disc, as it makes it easier to start working more confidently and reduces the load on the network at startup.

Protection against re-engagement protects against automatic start-up of the tool after power failure and return. An additional lock on accidental switching improves safety when preparing the grinder for work.

The side handle can be positioned in a comfortable position to better control the tool when cutting, grinding and cleaning surfaces. The GL-280 does not have a rotating rear handle, so stable handling is ensured primarily by the main handle and an additional side handle.

The 3 m cable gives a more comfortable working range at the station. The spare set of graphite brushes included makes it easy to use the tool later.

Application

Angle grinder Dnipro-M GL-280 is suitable for:

• cutting steel profiles, pipes, angles and rods;
• cutting sheet metal and metal elements;
• grinding and cleaning of welds;
• cutting concrete, brick, stone and ceramics;
• work with building blocks and construction materials;
• construction, renovation and assembly works;
• preparation of steel and mineral elements for further processing;
• tasks requiring a large 230 mm disc and high power.

You buy in the official store of the manufacturer Dnipro-M - you can be sure of the original product, consistent with the manufacturer's data and intended for real work.

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With VAT invoice
Parametry	Brand	Dnipro-M
Parametry	Kind	angle grinder
Parametry	Power supply type	mains
Parametry	Maximum power	3200 W
Parametry	Supply voltage	230 V
Parametry	Disc diameter	230 mm
Parametry	Maximum speed	6500 RPM
Parametry	Abrasive clamping system	clamp fastening
Parametry	Power cord length	3 m
Parametry	Device weight	6 kg
Parametry	Manufacturer code	80590000
Parametry	Product weight with unit packaging	6.2 kg
Parametry	EAN (GTIN)	4823102321776
Parametry	Packaging status	original
Parametry	Series	GL-280
Parametry	Plate diameter	230 mm
Parametry	Disc bore diameter	22.23 mm
Parametry	Batteries included	no